1. Вступ
The SunTouch WarmWire Electric Floor Heating Kit provides a radiant heating solution for various indoor spaces, including bathrooms, kitchens, and entryways. This system is designed to deliver comfortable warmth directly to your floor surfaces. This manual outlines the components, installation procedures, operational guidelines, and maintenance recommendations to ensure safe and efficient use of your heating system.
Image 1.1: SunTouch WarmWire Electric Floor Heating Kit components.
2. Інформація про безпеку
ПОПЕРЕДЖЕННЯ: Ризик ураження електричним струмом. Встановлення має виконувати кваліфікований електрик відповідно до всіх місцевих та національних електротехнічних норм.
- Always disconnect power at the main circuit breaker before installing or servicing the heating system.
- The heating cable must not be cut or shortened. Any damage to the cable during installation can lead to system failure or electrical hazards.
- The system must be protected by a Ground Fault Circuit Interrupter (GFCI), which is integrated into the Command Touch Thermostat.
- Do not install the heating cable under permanent fixtures such as cabinets, bathtubs, or toilets.
- Ensure the floor sensor is properly installed and protected to prevent damage.
3. Вміст упаковки
Перед початком встановлення переконайтеся, що всі компоненти є в наявності та не пошкоджені:
- WarmWire Radiant Heating Cable (70 Sq. Ft., 120V)
- Sun Stat Command Programmable Thermostat Touchscreen
- Rolls of Cable Strap for securing cable to subfloor
- Floor Sensor Wire (10k Ohm)
- Roll of double-sided tape
- Дротові гайки
- Loudmouth Continuity Alarm (for installation monitoring)
4. Налаштування та встановлення
Proper installation is critical for the performance and safety of your WarmWire system. Refer to the detailed installation guide included with your kit for specific instructions and diagrams.
4.1 Перевірки перед інсталяцією
- Схема плану: Determine the exact area to be heated, avoiding areas under permanent fixtures.
- Підготовка основи підлоги: WarmWire can be installed over plywood, backerboard, or concrete slab. Ensure the subfloor is clean, dry, and level.
- Електричні вимоги: Confirm that a dedicated 120V circuit is available, capable of handling the 7 Amp load (840 watts) of the 70 Sq. Ft. kit. Multiple cables can be wired in parallel to the same thermostat, up to a total load of 15 amps.
4.2 Встановлення кабелю
The WarmWire cable is designed for easy installation with a single point power connection. Use the provided cable straps and double-sided tape to secure the cable to the subfloor according to your planned layout. Maintain proper spacing between cable runs as specified in the detailed instructions.
4.3 Using the Loudmouth Continuity Alarm
The Loudmouth device is an essential tool during installation. Connect it to the heating cable leads before and during the entire installation process. It will emit an audible alarm if the cable is cut or damaged, allowing for immediate detection and repair before the cable is embedded in mortar or self-leveling concrete.
Image 4.1: Loudmouth Continuity Alarm.
4.4 Thermostat and Sensor Installation
Install the Command Touch Thermostat in a standard electrical box. Route the floor sensor wire to the heated area, ensuring it is positioned centrally between two heating cable runs for accurate temperature readings. Connect the heating cable, floor sensor, and power supply to the thermostat using the provided wire nuts, following the wiring diagram in the full manual.
5. Інструкція з експлуатації
The Sun Stat Command Touch Programmable Thermostat offers advanced control over your floor heating system.
5.1 Початкове налаштування та програмування
Upon initial power-up, the thermostat will guide you through a user-friendly programming setup wizard. This includes setting the time, date, and your preferred heating schedule.
- Адаптивний сенсорний екран: Navigate menus and adjust settings using the brilliant color touchscreen display. Choose from 5 color scheme options.
- 7-денна програма: Set a customized heating schedule for each day of the week to match your lifestyle.
- Floor and Air Sensing Modes: The thermostat can operate based on floor temperature, ambient air temperature, or a combination of both for optimal comfort and energy efficiency.
- Smart Start Technology: This feature automatically adjusts the system's start time to ensure your floor reaches the set temperature at your scheduled time, preventing cold floors in the morning.
5.2 Додаткові функції
- Home Automation Tie-In: A dry contact allows for on and off control integration with compatible home automation systems.
- Energy Use Monitor: The thermostat logs and reports energy consumption, helping you track and manage your heating costs.
- GFCI Built-in: For enhanced safety, a Ground Fault Circuit Interrupter is integrated into the thermostat.
Image 5.1: Radiant floor heating provides comfortable warmth.
6. Технічне обслуговування
The SunTouch WarmWire system is designed for minimal maintenance once installed. Regular checks can help ensure continued optimal performance.
- Очищення термостата: Обережно протріть сенсорний екран м’якою ганчіркоюamp тканина. Уникайте абразивних очищувачів.
- Перевірка системи: Periodically verify that the GFCI function on the thermostat is operational by pressing the 'Test' button. The thermostat should trip, and then be reset.
- Немає частин, які обслуговуються користувачем: The heating cable itself contains no user-serviceable parts. Do not attempt to repair damaged cables. Contact a qualified professional if damage is suspected.
7. Вирішення проблем
If your SunTouch WarmWire system is not functioning as expected, consider the following common issues before contacting support:
- Без нагрівання:
- Check the circuit breaker for the heating circuit.
- Ensure the thermostat is set to an 'On' or 'Heat' mode and the set temperature is above the current floor temperature.
- Verify the GFCI on the thermostat has not tripped. Reset if necessary.
- Неточні показники температури:
- Ensure the floor sensor is correctly installed and not damaged.
- Check thermostat settings for floor vs. air sensing modes.
- Thermostat Display Not Working:
- Check power supply to the thermostat.
- If the issue persists, the thermostat may require replacement.
For complex issues or suspected cable damage, contact a qualified electrician or SunTouch customer support.
8. Технічні характеристики
| Особливість | Специфікація |
|---|---|
| Номер моделі | 120070WD-BKIT |
| Опалювальне покриття | 70 квадратних футів |
| томtage | 120 вольт |
| Wattage | 840 Вт |
| Ampераж | 7 Amps |
| Налаштування мінімальної температури | 5 градусів Цельсія (41°F) |
| Налаштування максимальної температури | 31 градусів Цельсія (88°F) |
| Material (Cable) | Мідь |
| Характеристики термостата | Programmable, Touchscreen, GFCI, Smart Start, Energy Monitor |
| Використання в приміщенні/зовні | закритий |
9. Інформація про гарантію
SunTouch and Watts Radiant warrant their electric floor heating mats and cables to be free from defects in materials and workmanship for twenty-five (25) years from the date of manufacture. Thermostats and controls sold by the Companies are warranted, parts and materials, for два (2) роки from the date of purchase. The sole remedy for controls is product replacement.
This warranty is provided to customers who purchase the Products from authorized resellers and is transferable to subsequent owners of properties where the Products are initially installed.
10. Підтримка
For technical assistance, troubleshooting, or warranty claims, please contact SunTouch customer support. Refer to the official SunTouch webсайт для отримання найактуальнішої контактної інформації.
Інтернет-ресурси: Visit the SunTouch Store on Amazon
