вступ
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Jandy 3-inch 3-Port Diverter Valve, model 4719. This positive seal valve is designed for use in pool and spa systems, offering reliable flow control without the need for lubrication.
Figure 1: Jandy 3-Way 3-Port Diverter Valve (Model 4719). This image displays the main components of the valve, including the three connection ports, the central diverter handle, and the securing screws on the valve body.
Налаштування та встановлення
The Jandy 3-Port Diverter Valve is designed for straightforward installation. Proper installation is crucial for optimal performance and to prevent leaks.
- Тип підключення: This valve utilizes solvent-weld connections for secure plumbing. Ensure all pipe ends are clean and properly prepared before applying solvent cement.
- Ідентифікація порту: Identify the inlet and outlet ports. The valve typically has one inlet and two outlet ports, or vice-versa, depending on the desired flow configuration.
- Напрямок потоку: Plan your plumbing to ensure correct water flow through the valve. The valve's handle allows for diverting flow between the ports.
- Adjustable Stop Feature: The valve includes an adjustable stop feature. This allows for fine-tuning of flow adjustment and precise positioning of the diverter handle. Consult a plumbing professional if unsure about this adjustment.
- Ущільнення: After solvent welding, allow adequate curing time as per the solvent cement manufacturer's instructions before pressurizing the system.
Інструкція з експлуатації
The Jandy 3-Port Diverter Valve provides flexible control over water flow in your pool or spa system. Its "Never Lube" design ensures smooth operation without the need for periodic lubrication.
- Ручка перемикача: The central handle on the valve body is used to direct water flow. Rotate the handle to align with the desired port configuration. Markings on the valve body typically indicate flow paths (e.g., "OFF", "INL", "OUT").
- Регулювання потоку: The adjustable stop feature allows for precise control over the percentage of flow directed to each port. This can be useful for balancing water flow to different features or equipment.
- Positive Seal: The valve is designed with a positive seal mechanism, which prevents leaks and ensures consistent pressure even under demanding conditions.
- Automation Compatibility: This valve is designed for easy integration with pool and spa automation systems. Refer to your automation system's manual for specific connection and programming instructions.
Технічне обслуговування
The Jandy 3-Port Diverter Valve is engineered for durability and minimal maintenance, featuring a "Never Lube" design.
- Змащення не потрібне: Unlike traditional valves, this valve never requires lubrication. Attempting to lubricate the valve may damage its internal components and void the warranty.
- Прибирання: Periodically inspect the exterior of the valve for dirt or debris. Clean with a soft cloth and mild soap solution if necessary. Avoid abrasive cleaners or solvents.
- Запобігання витоку: The valve is designed to resist leaks, breaking, melting, pressure loss, or slipping. If any issues arise, refer to the troubleshooting section.
- Зимоутворення: In colder climates, ensure the valve and associated plumbing are properly drained and protected from freezing temperatures to prevent damage.
Усунення несправностей
While the Jandy 3-Port Diverter Valve is highly reliable, occasional issues may arise. This section provides guidance for common problems.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Water Leakage from Valve Body | Improper solvent weld during installation; damaged internal seal (unlikely for "never lube" design). | Verify solvent weld connections. If leakage persists and is not from connections, contact a qualified pool technician or Jandy support. |
| Difficulty Rotating Handle | Debris lodged in valve; improper installation of adjustable stop. | Ensure no debris is obstructing the handle's movement. Check the adjustable stop setting. Do not force the handle. |
| Reduced or Uneven Flow | Incorrect handle position; obstruction in plumbing lines. | Confirm the handle is fully engaged in the desired position. Check for blockages in the connected plumbing system. |
For issues not listed here or if solutions do not resolve the problem, it is recommended to contact a certified pool and spa professional or Jandy customer support.
Технічні характеристики
Key technical specifications for the Jandy 3-Way 3-Port Diverter Valve (Model 4719):
| Особливість | Деталь |
|---|---|
| Бренд | Дженді |
| Номер моделі | 4719 |
| Номер деталі | JV21N |
| UPC | 052337002080 |
| матеріал | Полівінілхлорид (ПВХ) |
| Зовнішня обробка | ХПВХ |
| Кількість портів | 3 |
| Розмір вхідного з'єднання | 2.54 Inches (designed for 2.5" to 3" plumbing) |
| Тип вхідного з'єднання | Solvent-weld |
| Розмір розетки | 2.54 Inches (designed for 2.5" to 3" plumbing) |
| Тип розетки | NPT |
| Тип клапана | Multi-port Diverter Valve |
Гарантія та підтримка
For information regarding the warranty coverage for your Jandy 3-Way Diverter Valve (Model 4719), please refer to the warranty documentation provided at the time of purchase or visit the official Jandy webсайт. Гарантійні умови можуть відрізнятися.
If you require technical assistance, have questions about installation, or need to report a defect, please contact Jandy customer support directly or the authorized dealer from whom you purchased the product. Contact information can typically be found on the manufacturer's webсайт або ваш чек про покупку.
