вступ
This instruction manual provides essential information for the proper installation, usage, and maintenance of your Breeze TB300 Standard T-Bolt Clamps. Please read this manual thoroughly before installation to ensure safe and effective operation.
Продукт закінченийview
The Breeze TB300 Standard T-Bolt Clamp is designed for high-strength clamping applications, particularly for securing hoses or pipes. It features a robust construction suitable for demanding environments.
Figure 1: A stainless steel T-Bolt clamp, showing the band, bolt, and nut mechanism. This clamp is designed for securing hoses or pipes in various applications.
Ключові характеристики:
- 3/4" (19 mm) wide, 100% Stainless Steel Band: Ensures durability and corrosion resistance.
- High Strength, One-Piece Stainless Steel Trunnion: Provides robust connection and secure fastening.
- Superior welded construction: Enhances overall strength and reliability.
- Meets or exceeds SAE Spec. J1508 for T-Bolt clamps: Guarantees adherence to industry standards for performance.
Встановлення та налаштування
Proper installation is crucial for the performance and longevity of the T-Bolt clamp. Follow these steps for secure attachment:
- Підготовка з'єднання: Ensure the hose or pipe ends are clean and free from debris.
- Розташуйте Clamp: Slide the T-Bolt clamp over the hose or pipe, positioning it correctly over the connection point.
- Align the Bolt: Align the T-bolt with the trunnion and thread the nut onto the bolt.
- Затягніть гайку: Using an appropriate wrench, gradually tighten the nut. Apply even pressure to ensure uniform clamping force around the circumference of the hose.
- Перевірте надійність кріплення: Continue tightening until the hose is firmly secured and there is no leakage (if applicable). Avoid over-tightening, which can damage the hose or the clamp.
- Verify Torque (Recommended): If a specific torque specification is available for your application, use a torque wrench to achieve the recommended torque value.
Використання та експлуатація
Once installed, the T-Bolt clamp provides a secure and reliable connection. Its operation is passive, maintaining the integrity of the connection under various pressures and vibrations. Regular inspection is recommended to ensure continued performance.
Технічне обслуговування
To maximize the lifespan and effectiveness of your Breeze TB300 T-Bolt Clamps, consider the following maintenance practices:
- Регулярна перевірка: Періодично перевіряйте clamps for any signs of wear, corrosion, or damage. Check for loose nuts or bolts.
- Прибирання: If operating in dirty or corrosive environments, clean the clamps as needed to prevent buildup that could affect performance.
- Повторне затягування: Over time, vibrations or material settling may cause the clamp to loosen slightly. Re-tighten the nut if necessary to maintain optimal clampінженерна сила.
- Заміна: Якщо клamp shows significant signs of damage, deformation, or severe corrosion, replace it immediately to prevent failure.
Усунення несправностей
While T-Bolt clamps are generally reliable, issues can arise. Here are some common problems and their solutions:
| проблема | Можлива причина | Рішення |
|---|---|---|
| Витік у точці підключення | Clamp not tight enough; improper hose seating; damaged hose/fitting. | Затягніть клamp further (do not over-tighten); re-seat the hose; inspect and replace damaged components. |
| Clamp appears loose | Vibration; material compression; insufficient initial tightening. | Re-tighten the nut; consider using a locking washer if vibrations are severe. |
| Clamp corrosion/damage | Exposure to harsh chemicals; physical impact; end of service life. | Замініть clamp. Ensure proper material selection for the environment. |
Технічні характеристики
The following are the key specifications for the Breeze TB300 Standard T-Bolt Clamp:
- Номер моделі: ТБ-300
- Effective Diameter Range: 3 дюйма - 3.31 дюйма (76.2 мм - 84.1 мм)
- Ширина стрічки: 3/4 дюйма (19 мм)
- матеріал: 100% Stainless Steel Band, High Strength One-Piece Stainless Steel Trunnion, Plated Carbon Steel Bolt.
- Відповідність: Meets or exceeds SAE Spec. J1508 for T-Bolt clamps.
- Вага товару: 2 фунта (за упаковку з 10 штук)
- Виробник: Breeze Ind. Products
Гарантія та підтримка
Specific warranty details for the Breeze TB300 Standard T-Bolt Clamps are not provided in this manual. For warranty information or technical support, please contact Breeze Industrial Products directly or refer to their official webсайт.
