вступ
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Zoeller 508-0007 Aquanot 508 ProPak98 Preassembled Sump Pump System with Battery Back-Up. This system is designed to provide reliable water removal and backup protection for your clear water sump.
Image: The Zoeller 508-0007 Aquanot 508 ProPak98 Preassembled Sump Pump System, showing the main pump, battery case, and control panel.
Інформація про безпеку
Будь ласка, прочитайте та зрозумійте всі попередження та інструкції з техніки безпеки перед встановленням або експлуатацією цього виробу. Недотримання цих інструкцій може призвести до ураження електричним струмом, пожежі, серйозних травм або пошкодження майна.
- Always disconnect power before servicing the pump or battery system.
- Забезпечте належне заземлення всіх електричних з'єднань.
- Do not operate the pump in areas containing flammable liquids or gases.
- This system is designed for clear water sumps only. Do not use for sewage or other hazardous liquids.
- Wear appropriate personal protective equipment during installation and maintenance.
Вміст упаковки
Переконайтеся, що всі компоненти є в наявності та не пошкоджені після розпакування:
- Model 98 12-volt DC pump
- Model 508 Aquanot 12 Volt DC backup system with pump
- Integrated DC pump discharge check valve
- Additional AC pump check valve
- Поплавковий вимикач
- Piping (pre-plumbed in 1-1/2" Schedule 40 PVC pipe)
- Tee and adapter fittings
- Battery case (Note: 12-volt battery NOT included)
- Control box with 10 amp battery recharger system
Налаштування та встановлення
The Zoeller Aquanot 508 ProPak98 system comes preassembled for ease of installation. It is designed to be installed in a clear water sump pit.
- Підготовка вигрібної ями: Ensure your sump pit is clean and free of debris. The pit must be large enough to accommodate the preassembled unit and allow for proper float switch operation.
- Позиціонування системи: Carefully lower the preassembled pump system into the sump pit. Ensure it sits level and the float switch has unrestricted movement.
- Підключення випускного трубопроводу: Connect the system's 1-1/2" PVC discharge pipe to your existing discharge line. Use appropriate PVC cement and primer for a watertight seal. The system includes integrated check valves for both AC and DC pumps.
- Установка батареї:
- Obtain a compatible 12-volt battery (Group size 27, 29, or 31). The battery is not included.
- Place the battery inside the provided non-corrodible polyethylene battery case. Maximum battery dimensions: 13" L x 7.5" W x 9.5" H (33 cm L x 19 cm W x 24 cm H).
- Connect the battery cables from the control box to the battery terminals, ensuring correct polarity (red to positive, black to negative).
- Електричні підключення:
- Plug the AC pump power cord into a grounded 120V AC outlet.
- Plug the control box power cord into a separate grounded 120V AC outlet.
- The control box will begin charging the battery and performing system diagnostics.
- Auxiliary Alarm Contact (Optional): If desired, connect the auxiliary alarm contacts on the control box to a home security alarm system or auto-dialer for remote notification. Refer to your security system's manual for connection details.
- Тестова операція: Fill the sump pit with water to activate the primary AC pump. Verify that water is discharged correctly. Then, simulate a power outage (by unplugging the AC pump) to test the battery backup system. The DC pump should activate, and the alarm should sound.
Інструкція з експлуатації
The Aquanot 508 ProPak98 system operates automatically to protect your basement from flooding.
Primary AC Pump Operation
The main AC pump will activate when the water level in the sump pit rises and lifts its float switch. It will pump water out until the float switch drops to its off position.
Battery Back-Up DC Pump Operation
У разі вимкнення живленняtage or primary pump failure, the 12-volt DC backup pump will automatically engage when its dedicated float switch is activated by rising water. The control box will sound an alarm and illuminate indicators to alert you to the backup system's operation.
Control Box and LCD Screen
The control box features a solid-state, automatic 10 amp battery recharger system. The LCD screen continuously displays the battery voltage and other system information. It also provides alarms, light indicators, and warning systems for various operational states, including battery burn-out and overcharge protection.
Технічне обслуговування
Regular maintenance ensures the longevity and reliability of your sump pump system.
- Щомісячний тест: Manually lift the float switch for both the AC and DC pumps to ensure they activate and pump water. Verify that the backup alarm sounds during DC pump operation.
- Перевірка батареї: Periodically check the battery terminals for corrosion. Clean if necessary. Ensure the battery fluid levels (if applicable for wet cell batteries) are maintained. The LCD screen will display battery voltage.
- Очищення вигрібної ями: Annually, or more frequently if needed, clean the sump pit of any sediment, dirt, or debris that could interfere with pump or float switch operation.
- Перевірка поплавкового вимикача: Ensure both float switches move freely and are not obstructed by wires, pipes, or debris.
- Зворотні клапани: Inspect check valves for proper function and ensure they are not leaking.
Усунення несправностей
If your system is not operating as expected, consider the following common issues:
| проблема | Можлива причина | Рішення |
|---|---|---|
| Насос не включається. | No power; tripped breaker; float switch obstructed; pump clogged. | Check power supply and breaker. Clear float switch. Inspect pump intake for clogs. |
| Насос працює безперервно. | Float switch stuck in "on" position; check valve faulty; discharge pipe blockage. | Clear float switch. Inspect/replace check valve. Clear discharge pipe. |
| Backup pump alarm sounds. | Power otage; primary pump failure; low battery voltage. | Check AC power. Inspect primary pump. Check battery connections and charge level. |
| Water not discharging. | Discharge pipe blockage; pump impeller clogged; faulty pump. | Clear discharge pipe. Inspect and clean pump impeller. Contact support if pump is faulty. |
If problems persist, contact Zoeller customer support or a qualified technician.
Технічні характеристики
- модель: 508-0007
- Бренд: Зеллер
- Джерело живлення: Battery Powered (12 Volts DC for backup, 120V AC for primary)
- томtage: 12 вольт (постійний струм)
- Максимальна швидкість потоку: 72 галона за хвилину
- Вага товару: 57.8 фунта
- Розміри продукту: 8.5 см (Д) x 8.5 см (Ш) x 10.5 см (В)
- матеріал: Cast Iron, Stainless Steel, Polyvinyl chloride, Plastic
- Вимоги до батареї: 1 x 12V battery required (not included). Compatible with Group size 27, 29, and 31 batteries.
- Особливості: Aquanot battery: Size 31 wet P/N 10-0761. Size 27 AGM P/N 10-1450 (sold separately)
Інформація про гарантію
This Zoeller 508-0007 Aquanot 508 ProPak98 Sump Pump System is covered by a 3 рік обмеженої гарантії from the date of purchase. For detailed warranty terms and conditions, please refer to the official Zoeller documentation or contact Zoeller customer support.
Підтримка клієнтів
For technical assistance, replacement parts, or warranty claims, please contact Zoeller customer support. Visit the official Zoeller webсайт для отримання контактної інформації та додаткових ресурсів.
