Продукт закінченийview
The Cen-Tech 6/12V Circuit Tester is a diagnostic tool designed to quickly check for the presence of electrical current in 6-volt and 12-volt DC systems. It features a durable construction with a needle point probe and an integrated indicator light to confirm circuit activity.
Важлива інформація з безпеки
Read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Під час використання завжди надягайте захисні окуляри, схвалені ANSI.
- Do not use this circuit tester on AC voltage or circuits exceeding 12 volts DC.
- Ensure the alligator clip has a secure and clean ground connection before probing.
- Уникайте контакту з електричними компонентами під напругою.
- Keep hands and clothing away from moving parts when working on vehicles.
- Перевіряйте інструмент на наявність пошкоджень перед кожним використанням. Не використовуйте його, якщо він пошкоджений.
- Зберігати в недоступному для дітей місці.
Налаштування
The Cen-Tech 6/12V Circuit Tester requires minimal setup. Ensure the tool is clean and free from any visible damage before beginning your work.
- Uncoil the lead wire and ensure it is not tangled or kinked.
- Confirm the needle point probe is securely attached and not bent.
Інструкція з експлуатації
Follow these steps to test for voltage in 6V or 12V DC circuits:
- Підготуйте контур: Ensure the circuit you intend to test is accessible and safe to work on.
- Підключення до землі: Attach the alligator clip of the circuit tester to a reliable ground source. For vehicle applications, this is typically the negative terminal of the battery or a clean, unpainted metal part of the chassis. A good ground connection is essential for accurate readings.
- Probe the Circuit: Carefully touch the needle point probe to the wire, terminal, or component you wish to test. Ensure firm contact.
- Зверніть увагу на індикаторну лампочку: If electrical current is present at the point of contact, the indicator light within the tester's handle will illuminate. The brightness of the light may vary with voltage, but its illumination confirms current flow.
- Інтерпретація результатів: If the light illuminates, the circuit is live. If the light does not illuminate, there is no current, or the circuit is open at that point.
- Відключити: After testing, carefully remove the probe from the circuit and then disconnect the alligator clip from the ground source.
Технічне обслуговування
Proper maintenance ensures the longevity and reliability of your circuit tester.
- Прибирання: After each use, wipe the probe and handle with a clean, dry, soft cloth to remove any dirt, grease, or moisture.
- Зберігання: Store the circuit tester in a dry, clean environment, away from direct sunlight, extreme temperatures, and corrosive materials.
- Огляд: Periodically inspect the lead wire for cuts, fraying, or damage. Check the probe for bends or corrosion. Replace the unit if any damage is found.
Усунення несправностей
Зверніться до таблиці нижче, щоб дізнатися про поширені проблеми та їх вирішення.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Indicator light does not illuminate on a known live circuit. | Poor or no ground connection. | Ensure the alligator clip is securely connected to a clean, reliable ground source. |
| Індикатор тьмяний. | Низький об'ємtage in the circuit or poor contact. | Перевірте об'єм ланцюгаtage is within the 6-12V range. Ensure good contact with both the probe and the ground. |
| Tester appears physically damaged. | Physical impact or wear. | Discontinue use immediately. Replace the unit to ensure safety and accurate testing. |
Технічні характеристики
- Бренд: Cen-Tech
- Номер моделі: CECOMINOD036567
- Робочий випtage: 6 В / 12 В постійного струму
- Довжина проводу: 5 футів
- Тип зонда: Голка
- Матеріал ручки: Heavy duty high impact plastic
- Вага товару: 16 унцій (1 фунт)
- Джерело живлення: Corded Electric (relies on circuit power)
- Тип вимірювання: Voltmeter (indicates presence of voltage)
- UPC: 784672317917
Інформація про гарантію
For specific warranty details, please refer to the documentation provided at the time of purchase or contact the retailer directly. Warranty terms typically cover manufacturing defects for a limited period.
Підтримка клієнтів
If you have questions or require assistance with your Cen-Tech 6/12V Circuit Tester, please contact the retailer where the product was purchased or refer to Cen-Tech's official customer service channels for support.