1. Вступ
The CyberPower BRG1500AVRLCD Intelligent LCD UPS System is designed to provide reliable battery backup and surge protection for desktop computers, workstations, networking devices, and home entertainment systems. This Uninterruptible Power Supply (UPS) system utilizes line interactive topology and simulated sine wave output to safeguard your valuable electronics from power interruptions and fluctuations.
Key features include Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, thereby extending battery life. It also offers two USB charge ports (2.1 Amps shared) for portable devices.

Figure 1: CyberPower BRG1500AVRLCD UPS System in a typical office environment, providing power protection to connected devices.
2. Заходи безпеки
Please read and follow all safety instructions carefully before installing or operating the UPS. Failure to do so may result in damage to the unit, connected equipment, or personal injury.
- Do not install the UPS in direct sunlight, near heat-emitting appliances, or in areas with excessive humidity.
- Ensure the UPS is connected to a grounded outlet.
- Не відкривайте ДБЖasing. Усередині немає деталей, які може обслуговувати користувач. Зверніться до кваліфікованого сервісного персоналу для обслуговування.
- Не використовуйте ДБЖ як медичне або життєзабезпечувальне обладнання.
- Ensure proper ventilation around the UPS. Do not block any ventilation openings.
- In case of fire, use a powder fire extinguisher. Do not use water.
3. Вміст упаковки
Перевірте наявність усіх елементів в упаковці:
- Блок ДБЖ
- Посібник користувача
4. Продукт закінчивсяview
4.1 Передня панель

Малюнок 2: Спереду view of the CyberPower BRG1500AVRLCD UPS, highlighting the Intelligent LCD panel and USB charging ports.
The front panel features the Intelligent LCD display, control buttons (Display, Mute, Enter, Setup), and two USB charge ports (USB-A and USB-C) for convenient charging of portable devices.
4.2 Задня панель

Малюнок 3: Задня частина view of the CyberPower BRG1500AVRLCD UPS, detailing the NEMA 5-15R outlets, network, cable, and serial ports.
The rear panel includes 12 NEMA 5-15R outlets: six battery backup & surge protected outlets and six surge protected outlets. It also features network (RJ45) and cable (Coax) surge protection ports, a serial port, and a USB port for management software connectivity. A circuit breaker reset button is also located on the rear panel.
5. Налаштування
5.1 Початкове заряджання
Before initial use, plug the UPS into a grounded wall outlet and allow it to charge for at least 8 hours to ensure maximum battery runtime. The unit will automatically turn on when connected to mains power.
5.2 Підключення обладнання
- Розетки з резервним живленням від батареї та захистом від перенапруги: Підключіть до цих розеток критично важливе обладнання, таке як комп'ютер, монітор та зовнішні жорсткі диски. Ці пристрої отримуватимуть живлення від акумулятора ДБЖ під час перебоїв у роботі.tage.
- Розетки із захистом від перенапруги: Connect non-critical equipment that still requires surge protection, such as printers or scanners, to these outlets. These devices will not receive battery backup power.
- USB Charge Ports: Use the front USB-A and USB-C ports to charge mobile phones, MP3 players, and cameras.
- Захист лінії передачі даних: Connect your network cable (RJ45) and coaxial cable (Coax) through the designated IN/OUT ports on the rear panel to protect against surges.
6. Інструкція з експлуатації
6.1 Увімкнення/вимкнення ДБЖ
- Увімкнути: Press and hold the Power button on the front panel for approximately 2 seconds. The LCD display will light up.
- Вимикати: Press and hold the Power button for approximately 2 seconds. The LCD display will turn off.
6.2 Функції РК-дисплея
The multifunction LCD panel displays immediate, detailed information on battery and power conditions. Use the 'Display' button to cycle through various screens:

Малюнок 4: Впрamples of information displayed on the Intelligent LCD panel, including input/output voltagе, навантаження та стан акумулятора.
- Вхідний об'ємtage: Показує поточний об'ємtagвід електромережі.
- Вихідний випtage: Показує випtage supplied by the UPS to connected equipment.
- Ємність батареї: Indicates the current charge level of the internal batteries.
- Вантажопідйомність: Відображає відсоткиtage of the UPS's capacity being used by connected equipment.
- Орієнтовний час виконання: Provides an estimate of how long the UPS can supply power during an outage based on the current load.
- Журнал подій: Records power events such as outagес, сплески та обtage коливання.
6.3 Автоматична випtage Регламент (AVR)
ДБЖ має функцію автоматичного регулювання гучностіtage Regulation (AVR), which automatically corrects minor power fluctuations (sags and overvoltages) without switching to battery power. This extends the life of the battery by reducing the number of times it needs to discharge and recharge.
6.4 PowerPanel Personal Edition Management Software
The UPS comes with FREE PowerPanel Personal Edition Management Software (Download). This software allows for advanced power management features, including scheduled shutdowns, remote monitoring, and customizable alerts. Refer to the software's documentation for installation and usage instructions.
7. Технічне обслуговування
7.1 Заміна батареї
The CyberPower BRG1500AVRLCD uses two 12V batteries. The batteries are designed to last approximately 3-5 years under normal operating conditions. When the batteries reach the end of their service life, they should be replaced by qualified personnel. For battery replacement, contact CyberPower Systems customer support or a certified technician.
7.2 Очищення
Regularly clean the exterior of the UPS with a dry cloth. Ensure ventilation openings are free from dust and debris to maintain proper airflow and prevent overheating.
8. Вирішення проблем
If the UPS is not functioning correctly, refer to the following common issues:
- ДБЖ не вмикається: Ensure the power cord is securely plugged into a grounded wall outlet and the UPS. Check the circuit breaker on the rear panel and reset if tripped.
- ДБЖ безперервно пищить: This usually indicates the UPS is operating on battery power during an outage or a low battery condition. Save your work and shut down connected equipment if the outagе є тривалим.
-
Пов'язані документи - BRG1500AVRLCD

Посібник з налаштування функцій ДБЖ CyberPower
Detailed guide for setting up functions and configurations on CyberPower Intelligent LCD UPS Systems, including voltage settings, sensitivity, alarms, and display options.
Посібник користувача ДБЖ CyberPower BRG1500AVRLCD2: характеристики, встановлення та експлуатація
Вичерпний посібник користувача для інтелектуального РК-ДБЖ CyberPower BRG1500AVRLCD2. Дізнайтеся про його функції, встановлення, основні принципи роботи, заміну батареї, усунення несправностей та технічні характеристики.
CyberPower PR750LCD3C Intelligent UPS Series User Manual
User manual for the CyberPower PR750LCD3C Intelligent UPS Series, providing detailed information on installation, operation, safety warnings, troubleshooting, and technical specifications for this Uninterruptible Power Supply.
Посібник користувача інтелектуальних ДБЖ CyberPower серії OR1000LCDRM1U/OR1500LCDRM1U | Посібник із захисту живлення
Вичерпний посібник користувача для інтелектуальних ДБЖ CyberPower серії (OR1000LCDRM1U, OR1500LCDRM1U). Дізнайтеся про встановлення, функції, експлуатацію, заміну батареї, усунення несправностей, технічні характеристики та безпеку для надійного захисту живлення.
Посібник користувача серії інтелектуальних ДБЖ CyberPower - CP850/1000/1350/1500AVRLCD
Посібник користувача для моделей CyberPower Intelligent UPS Series CP850AVRLCD, CP1000AVRLCD, CP1350AVRLCD та CP1500AVRLCD. Охоплює функції, безпеку, встановлення, експлуатацію, заміну батареї, усунення несправностей, технічні характеристики та технологію GreenPower UPS.
CyberPower PR5000RTXL2UC Smart App Sinewave UPS Series User Manual
Comprehensive user manual for the CyberPower PR5000RTXL2UC Smart App Sinewave UPS Series. Covers installation, basic and network operation, LCD settings, EPO/ROO configuration, dry contact monitoring, battery replacement, technical specifications, troubleshooting, and warranty information.