KeylessOption Key Fob Instruction Manual

вступ

This manual provides detailed instructions for the KeylessOption 3-button key fob remote, model KPT1660, designed as a replacement for compatible Toyota and Pontiac vehicles. It includes information on product components, vehicle compatibility, programming procedures, and general usage.

Зображення: спереду view of the KeylessOption 3-button key fob remote, showing Lock, Unlock, and Trunk/Panic buttons.

Що включено

Image: The package contents, including the key fob remote, a ring loop, and a pre-installed CR2032 battery.

• KeylessOption 3-button remote (Model KPT1660)
• Попередньо встановлена ​​батарея CR2032
• Programming instructions guide

Сумісність

This key fob is compatible with specific Toyota and Pontiac vehicle models and years. Please verify your vehicle's original keyless entry system and FCC ID to ensure compatibility.

Image: The front and back of the key fob, highlighting the FCC ID GQ43VT14T and Part Number 89742-AA030 for compatibility verification.

Сумісні транспортні засоби:

• Toyota Camry: 1999-2006
• Toyota Solara: 1998-2003
• Toyota Matrix: 2003-2008
• Toyota Sienna: 1998-2003
• Pontiac Vibe: 2003-2008

Важлива примітка: This item will not work if your original remote has a red light indicator. Ensure your vehicle is equipped with factory original keyless entry.

Ідентифікатор FCC: GQ43VT14T

Номер деталі: 89742-AA030

Налаштування та програмування

The KeylessOption key fob is designed for self-programming. Follow these step-by-step instructions carefully. All steps must be performed within the specified timeframes.

Image: Graphic indicating "DIY Self Programming" for the key fob, emphasizing it is fast, easy, and free.

Процедура програмування:

1. Приготування:
   • Ensure the key is out of the ignition.
   • The driver's door must be open, all other doors closed and locked.
   • The driver's door must be unlocked.
2. Initial Key Cycle (within 5 seconds):
   • Insert the key into the ignition (DO NOT Turn). Pull the key out.
   • Insert the key into the ignition (DO NOT Turn). Pull the key out.
3. Door Cycle 1 (within 40 seconds):
   • Close then open the driver's door.
   • Close then open the driver's door.
   • Insert the key into the ignition (DO NOT Turn). Pull the key out.
4. Door Cycle 2 and Ignition (within 40 seconds):
   • Close then open the driver's door.
   • Close then open the driver's door.
   • Insert the key into the ignition and leave it in the ignition.
   • Зачиніть двері водія.
   • Turn the ignition to ON (DO NOT Start) then back to OFF.
   • Вийміть ключ із замка запалювання.
5. Programming Mode Confirmation:
   • Within 3 seconds, the power door locks should lock then unlock automatically. This indicates successful entry into programming mode. If locks do not cycle, return to step 1.
6. Remote Programming (within 40 seconds):
   • Натисніть ЗАМОК і РОЗБЛОКУВАТИ buttons on the remote simultaneously for 1.5 seconds.
   • Immediately after releasing ЗАМОК і РОЗБЛОКУВАТИ натисніть кнопки ЗАМОК button by itself and hold for 2 seconds.
   • Within 3 seconds, the door locks should lock and then unlock once, indicating successful programming. If the door locks cycle twice, repeat the previous two sub-steps (pressing LOCK and UNLOCK simultaneously, then LOCK alone) as the remote was not accepted.
   • Repeat the previous two sub-steps for each additional new remote you wish to program.
7. Вийти з режиму програмування:
   • Open the driver's door to exit programming mode.

Operating the Key Fob

The KeylessOption key fob features three distinct buttons for controlling your vehicle's keyless entry functions.

Image: Diagram showing the front of the key fob with labels pointing to the Lock, Unlock, and Trunk/Panic buttons.

• Кнопка БЛОКУВАННЯ: Press once to lock all vehicle doors.
• Кнопка РОЗБЛОКУВАТИ: Press once to unlock all vehicle doors.
• TRUNK / PANIC Button: This button typically activates the trunk release. Holding this button down for a few seconds will activate the vehicle's panic alarm.

Зображення: Спина view of the key fob, showing the red panic button.

Технічне обслуговування

Заміна батареї:

The key fob uses one CR2032 lithium coin cell battery. When the remote's range decreases or it stops responding, it may be time to replace the battery.

1. Carefully pry open the key fob casing using a small flat-head screwdriver or a prying tool.
2. Locate the CR2032 battery inside the casing.
3. Remove the old battery, noting its orientation (positive side up).
4. Вставте нову батарейку CR2032 позитивним (+) полюсом догори.
5. Зафіксуйте брелок casinнадійно з'єднайте назад.

Загальний догляд:

• Уникайте тривалого впливу екстремальних температур, прямих сонячних променів або вологи на брелок.
• Не кидайте брелок та не піддавайте його сильним ударам.
• За потреби очистіть зовнішню частину м’якою сухою тканиною.

Усунення несправностей

Технічні характеристики

• Номер моделі: KPT1660
• Ідентифікатор FCC: GQ43VT14T
• Розміри продукту: 2 x 0.75 x 4 дюймів
• Вага товару: 0.317 унції
• Тип батареї: 1 x CR2032 (попередньо встановлено)
• колір: чорний

Гарантія та підтримка

KeylessOption products are designed for reliability and performance. For any issues or questions regarding your key fob, please contact KeylessOption customer support.

While specific warranty details are not provided in this manual, KeylessOption is committed to customer satisfaction. For support, please visit the official KeylessOption store on Amazon or contact their customer service directly through your purchase platform.

You can find more information and contact details by searching for "KeylessOption" on Amazon or by visiting their brand store:

Visit the KeylessOption Amazon Store