вступ
The DRYEASY Bedwetting Alarm is designed to assist in overcoming bedwetting by alerting the user at the first sign of moisture. This device features adjustable volume, multiple sound options, and vibration, providing a customizable and effective training solution. Consistent use, combined with parental support, is key to successful bedwetting training.
Image: The DRYEASY Bedwetting Alarm unit, its packaging, and a progress tracking card.
Important Safety Information and Training Guidelines
Please read the following information carefully before using the DRYEASY Bedwetting Alarm. Adherence to these guidelines is crucial for effective and safe training.
- Участь батьків: Parents play a critical role in the early stages of alarm training. Deep sleepers may not initially wake to the alarm. Parents must be prepared to wake the child as soon as the alarm sounds and continue this until the child responds independently. Active parental involvement is essential for success.
- Initial Wetting: At the beginning of training, the child may not stop urinating quickly, and underwear may still get soaked. This is normal. Over time, the brain will condition to respond to bladder messages, allowing the child to wake and use the toilet or sleep through the night without wetting.
- Gradual Process: Alarm training is a gradual process, typically requiring approximately three months. Patience, motivation, and persistence are crucial. Improvement may be observed within 1-3 months, but achieving consistent dry nights can take up to 4 months. While effective, there is no 100% guarantee of success.
- Тип батареї: Use only new Alkaline batteries. DO NOT use rechargeable batteries, as they may cause the alarm to malfunction (e.g., quiet ticking sound, vibration only).
- Прибирання: Regularly clean the sensor to maintain its sensitivity.
Image: A visual representation of key safety and training guidelines for the bedwetting alarm.
Вміст упаковки
Your DRYEASY Bedwetting Alarm package should contain the following items:
- 1 x DRYEASY Bedwetting Alarm Unit (Blue)
- 1 x Sensor with Cable
- 1 x Adjustable Armband
- 1 x Посібник користувача (цей документ)
- Лужні батарейки (в комплекті)
Налаштування
1. Встановлення батареї
Open the battery compartment cover on the back of the alarm unit. Insert the included Alkaline batteries, ensuring correct polarity. Close the cover securely.
Зображення: Задня частина view of the alarm unit, highlighting the battery compartment and various control switches.
2. Connecting the Sensor
Connect the sensor cable to the alarm unit. Ensure the connection is firm. The sensor is designed with an instant clip for secure attachment to underwear.
Image: The moisture sensor and its connecting cable.
For a visual guide on connecting the sensor and turning off the alarm, please watch the video below:
Video: This video demonstrates how to properly connect the sensor to the alarm unit and the procedure for turning off the alarm once activated.
3. Підключення сигналізації
The alarm unit can be attached to the pajama top or to the arm using the adjustable armband. Ensure the sensor is securely clipped to the child's underwear, where it can detect the first drop of urine. It is recommended to pull the child's underpants down to their knees for easier attachment.
Зображення: Прamples of how the alarm can be worn, either clipped to a pajama top or secured to the arm with the armband.
4. Adjusting the Armband
If using the armband, adjust its length to ensure a snug but comfortable fit on the child's arm. The armband should be secure enough not to fall off during sleep.
Image: The adjustable armband accessory for the bedwetting alarm.
Інструкція з експлуатації
1. Режими роботи
The DRYEASY alarm offers three operation modes, selectable via switches located inside the battery compartment to prevent accidental changes:
- Sound plus Vibration: The alarm will both sound and vibrate upon detecting moisture.
- Лише звук: The alarm will only produce sound.
- Тільки вібрація: The alarm will only vibrate.
2. Volume Control and Sound Options
The alarm features 4 levels of digital volume control, supporting a maximum loudness of 85 dB. There are 6 selectable sounds (A1, A2, A3, B1, B2, B3) to suit user preference and prevent auditory accommodation. You can choose a single sound or set the alarm to play the 6 sounds at random.
Image: The rear of the alarm unit, indicating the switches for sound selection and volume adjustment.
3. How the Alarm Works (Two-Step Turn-Off)
The alarm is designed to activate immediately upon detecting moisture. It features a two-step turn-off system to ensure the child fully wakes up. To stop the alarm:
- Unclip the sensor from the underwear.
- Press the reset button on the alarm unit.
Alternatively, you can hold the reset button down while unclipping the sensor. Holding the reset button snoozes the alarm even if the sensor is still attached to wet underwear.
To test the alarm's functionality, please refer to the video below:
Video: This video demonstrates how to test the bedwetting alarm to ensure it is functioning correctly.
Технічне обслуговування
1. Cleaning the Sensor
The sensor needs to be cleaned regularly to maintain its sensitivity and ensure accurate moisture detection. Use a damp cloth to gently wipe the sensor clip after each use. Ensure it is completely dry before storage or next use.
2. Заміна батареї
If the alarm produces only a quiet ticking sound or only vibrates without sound, the batteries are likely dead. Replace them with new Alkaline batteries. Do not use rechargeable batteries.
Усунення несправностей
| проблема | Можлива причина / рішення |
|---|---|
| Alarm won't stop sounding. | This alarm has a two-step turn-off feature. Unclip the sensor and press the reset button. If the alarm unit itself is wet, disconnect the cord, remove batteries, and blow dry the battery compartment and socket. |
| Difficult to clip sensor to underwear. | The clip is designed for secure attachment. Practice a few times. It's easier to attach by pulling the child's underpants down to their knees. |
| Only quiet ticking sound instead of alarm. | Battery is likely dead. Replace with new Alkaline batteries. Do NOT use rechargeable batteries. |
| Only vibration works, no sound. | Battery is likely dead. Replace with new Alkaline batteries. Do NOT use rechargeable batteries. |
| Sensor doesn't detect moisture. | The sensor may be dirty. Clean it regularly to maintain sensitivity. |
| Armband falls off easily. | The armband length is adjustable. Follow instructions to install it securely. |
| Device does not wake child. | It is common for children not to respond initially. Parents need to help wake the child when the alarm goes off. The child will gradually learn to wake independently. |
| Not usable with diapers or pull-ups. | The sensor should be clipped onto underwear. Diapers or pull-ups can be worn over underwear. |
Технічні характеристики
- Номер моделі: DE100TS
- Метод контролю: Дотик
- Рівень шуму: 85 дБ (максимум)
- Тип монтажу: Clothing Mount
- Сенсорна технологія: Контактний датчик
- Розміри продукту: 2.36 x 0.63 x 2.28 дюймів
- Вага товару: 2 унції
- Джерело живлення: Battery Powered (AAA batteries)
- колір: Синій
- Сертифікати: CE certified, ISO 9001:2008, ISO 13485 (for medical devices)
Гарантія та підтримка
The DRYEASY Bedwetting Alarm comes with a one-year warranty. For support or warranty claims, please contact the manufacturer, Marvelworks Ltd., or refer to the official DRYEASY store on Amazon.
Official DRYEASY Store: Visit the DRYEASY Store
A PDF version of the user manual is also available: Завантажити посібник користувача (PDF)
