Vimar Series Idea Classic Plate 3 Modules - Titanium

1. Вступ

This manual provides essential information for the safe and correct installation, usage, and maintenance of your Vimar Series Idea Classic Plate 3 Modules in Titanium finish. Please read these instructions carefully before proceeding with installation to ensure proper function and longevity of the product.

2. Продукт закінчивсяview

The Vimar Series Idea Classic Plate is designed to house three electrical modules, providing a clean and integrated aesthetic for your electrical installations. Crafted from durable titanium, it features a sophisticated brushed metallic finish.

Зображення, що показує передню частину view of the Vimar Series Idea Classic Plate, designed to accommodate three electrical modules. The plate features a brushed titanium metallic finish and the Vimar logo subtly embossed in the bottom right corner.

особливості:

• Triple Module Configuration: Designed to fit three standard Vimar electrical modules.
• Durable Titanium Material: Ensures longevity and resistance to wear.
• Brushed Metallic Finish: Provides a modern and elegant appearance.
• Монтаж гвинтами: Compatible with standard screw-in module support frames.

Компоненти:

• 1 x Vimar Series Idea Classic Plate (3 Modules)
• Note: Electrical modules, module support frames, and mounting screws are typically sold separately or included with the modules/back box.

3. Налаштування та встановлення

Заходи безпеки:

УВАГА: Always disconnect power at the main circuit breaker before performing any electrical work. Failure to do so may result in serious injury or death. If you are unsure about any part of the installation process, consult a qualified electrician.

Необхідні інструменти:

• Викрутка (підходить для монтажних гвинтів)
• томtage тестер
• Wire Strippers (if installing modules)

Кроки встановлення:

1. Підготуйте монтажну коробку: Ensure the electrical mounting box is securely installed in the wall and all wiring is correctly terminated to the electrical modules.
2. Встановлення модулів: Insert the desired Vimar electrical modules (e.g., switches, sockets) into the module support frame. Ensure they click securely into place.
3. Attach Module Support to Box: Secure the module support frame (with modules installed) to the electrical mounting box using the provided screws. Ensure the frame is flush with the wall surface.
4. Розташування пластини: Carefully align the Vimar Series Idea Classic Plate over the installed modules and module support frame. The plate is designed to snap into place or be secured with small retaining screws, depending on the specific Vimar system.
5. Закріпіть пластину: Gently press the plate until it sits flush and securely against the wall. If applicable, tighten any small retaining screws carefully to avoid overtightening.
6. Відновлення живлення: Once installation is complete and all connections are verified, restore power at the main circuit breaker.

4. Використання

The Vimar Series Idea Classic Plate serves as a decorative and protective cover for your electrical modules. Its primary function is aesthetic, providing a finished and integrated look to your electrical installations. Operate the installed switches or use the installed sockets as per their individual instructions.

5. Технічне обслуговування

To clean the plate, use a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild, non-abrasive soap can be used, followed by drying with a soft, clean cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the titanium finish.

6. Вирішення проблем

• Plate does not sit flush: Ensure the module support frame and modules are correctly installed and not protruding from the wall box. Check for any obstructions behind the plate.
• Modules are loose: Verify that the modules are properly clicked into their support frame and that the frame is securely fastened to the wall box.
• Подряпини або пошкодження: The titanium finish is durable but not impervious to damage. Handle with care during installation and cleaning. Severe damage may require replacement of the plate.

7. Технічні характеристики

• Бренд: Вімар
• модель: ІДЕЯ СЕРІЇ
• матеріал: Титан
• колір: Metallic (Brushed Finish)
• Конфігурація: 3 Modules (Triple)
• Тип установки: Screw-In (for module support frame)
• Вага товару: Приблизно 3.96 унцій (112.4 грамів)
• Розміри продукту: 11.81 x 76.77 x 102.36 inches (Note: These dimensions appear unusually large for a standard wall plate and may refer to packaging or an error in source data. Please verify actual product dimensions upon receipt.)
• Виробник: Вімар
• ASIN: B00IAUWFFU

8. Гарантія та підтримка

For detailed warranty information, technical support, or to inquire about replacement parts, please refer to the official Vimar website or contact your authorized Vimar dealer. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.