PROFLO PF9312

PROFLO Amador PF9312 Toilet Tank Only User Manual

Модель: PF9312

1. Вступ

This manual provides essential instructions for the proper installation, operation, and maintenance of your PROFLO Amador PF9312 Toilet Tank. Please read this manual thoroughly before beginning installation or use to ensure safe and efficient performance. This product is a toilet tank only and requires a coordinating toilet bowl for complete installation.

PROFLO Amador PF9312 Toilet Tank

Image 1.1: The PROFLO Amador PF9312 Toilet Tank. This image displays the white vitreous china toilet tank with its flush lever on the side.

2. Інформація про безпеку

Observe all local plumbing and building codes during installation. Always wear appropriate personal protective equipment, such as safety glasses and gloves, when handling plumbing fixtures and tools. Ensure the water supply is turned off before beginning any installation or maintenance work. If you are unsure about any part of the installation process, consult a qualified plumber.

3. Вміст упаковки

Перш ніж продовжувати встановлення, переконайтеся, що всі компоненти є в наявності та не пошкоджені.

Примітка: A toilet bowl, toilet seat, and wax ring/flange bolts are sold separately and are required for a complete toilet installation.

4. Налаштування та встановлення

4.1 Підготовка

  1. Вимкніть подачу води в зону туалету.
  2. Remove any existing toilet tank and clean the area around the toilet bowl's mounting surface.
  3. Ensure the rough-in dimension (distance from the wall to the center of the drain pipe) is 12 inches for proper fitment.

4.2 Встановлення бака

  1. Place the tank-to-bowl gasket onto the flush valve opening at the bottom of the toilet tank.
  2. Carefully align the tank with the bolt holes on the toilet bowl.
  3. Insert the tank-to-bowl bolts through the tank and bowl holes. Secure with washers and nuts from underneath the bowl, tightening evenly until the tank is stable and does not rock. Avoid overtightening to prevent cracking the vitreous china.
  4. Connect the water supply line to the fill valve shank at the bottom of the tank. Hand-tighten, then use a wrench for a final quarter-turn.
  5. Turn on the water supply slowly and check for leaks. Allow the tank to fill.
PROFLO Amador Toilet Tank installed on a bowl

Image 4.1: The PROFLO Amador PF9312 Toilet Tank shown installed on a compatible toilet bowl. Note that the bowl and seat are separate components.

5. Інструкція з експлуатації

To operate the toilet, simply press down on the flush lever located on the side of the tank. This action lifts the flush valve, allowing water to flow from the tank into the toilet bowl, initiating the flush cycle. Release the lever once the flush is complete. The tank will then refill automatically.

6. Технічне обслуговування

6.1 Очищення

Clean the exterior of the toilet tank with a soft cloth and mild, non-abrasive cleaning agents. Avoid harsh chemicals or abrasive scrubbers, as these can damage the vitreous china finish. For internal components, periodic inspection for mineral buildup is recommended. Use a toilet bowl cleaner specifically designed for internal tank use if necessary, following the product's instructions.

6.2 Перевірка компонентів

Periodically inspect the fill valve, flush valve, and flush lever for proper function and wear. Ensure the flapper or seal is seating correctly to prevent leaks. Adjust the water level if needed, typically by adjusting the fill valve float mechanism according to the manufacturer's instructions for the specific fill valve model.

7. Вирішення проблем

проблемаМожлива причинаРішення
Tank does not fill or fills slowlyWater supply turned off; clogged fill valve; kinked supply line.Ensure water supply is on; clean or replace fill valve; straighten supply line.
Tank continuously runs or leaksFlapper not sealing properly; fill valve not shutting off; water level too high.Inspect/replace flapper; adjust or replace fill valve; adjust water level.
Слабкий змивLow water level in tank; clogged siphon jet or rim holes in bowl (bowl issue).Adjust water level to correct height; clean bowl's siphon jet and rim holes (refer to bowl manual).

For issues not listed here or if troubleshooting steps do not resolve the problem, contact PROFLO customer support or a qualified plumber.

8. Технічні характеристики

9. Гарантія та підтримка

PROFLO products are factory tested to ensure flawless function. This PROFLO toilet tank is covered under PROFLO's Fixtures warranty for one year after installation. For specific warranty details, claims, or technical support, please refer to the official PROFLO webсайт або зверніться до їхнього відділу обслуговування клієнтів. Зберігайте чек про покупку як підтвердження покупки для гарантійних цілей.

Підтримка клієнтів PROFLO: Будь ласка, відвідайте www.proflo.com for contact information and further assistance.

Пов'язані документи - PF9312

попередньоview Двосекційний унітаз із подвійним змивом PROFLO серії PF1400T - Характеристики продукту
Вичерпні характеристики продукту, характеристики, деталі моделі, розміри та сертифікати для двосекційного унітазу PROFLO серії PF1400T з подвійним змивом. Містить інформацію про гарантію та інструкції з встановлення.
попередньоview Інструкція з встановлення унітазу та бачка PROFLO HET (1.28 галона за північ)
Вичерпний посібник з встановлення унітазу з бачком PROFLO HET з об'ємом 1.28 галона на змив. Містить необхідні інструменти, інформацію про демонтаж старого унітазу, кроки встановлення, налаштування, усунення несправностей та інформацію про гарантію.
попередньоview Інформація про поломку деталей та гарантію на резервуар для туалету PROFLO PF6112WH 1.28 gpf
Детальний опис деталей для бака PROFLO PF6112WH 1.28 галона на кубічний фут. Містить список доступних кришок бака, внутрішніх компонентів з номерами деталей та гарантійними даними. Містить текстові описи схем та компонентів.
попередньоview Інструкція з встановлення двосекційного унітазу/бака PROFLO HET універсальної серії
Цей документ містить вичерпні інструкції з встановлення двосекційного унітазу/бака PROFLO HET універсальної серії, що охоплюють як моделі з бортиком, так і моделі з відкритою чашею. Він містить перелік необхідних інструментів та деталей, покрокові інструкції з демонтажу старого та встановлення нового унітазу, а також поради щодо усунення несправностей.
попередньоview Керівництво з встановлення та чищення сидіння для унітазу PROFLO
Вичерпний посібник з встановлення та очищення сидінь для унітазів PROFLO, включаючи моделі PFTSHEC1000WH, PFTSHEC1000BS, PFTSHEC2000WH та PFTSHEC2000BS. Містить прості кроки встановлення та інструкції з очищення методом підйому та потягування.
попередньоview Керівництво з встановлення та чищення сидіння для унітазу PROFLO
Покрокові інструкції з встановлення та очищення сидінь для унітазів PROFLO, включаючи моделі PFTSEC1000WH, PFTSEC2000WH та PFTSEC2000BS. Має просте встановлення та методи очищення «підіймаючи та витягуючи».