1. Вступ
This manual provides essential information for the safe and effective use of your SigmasTek SP12-12 12 Volt 12 AmpH Sealed Lead-Acid (SLA) Battery. Please read these instructions carefully before installation, operation, or maintenance to ensure optimal performance and longevity of the battery.
2. Інформація про безпеку
Завжди дотримуйтесь наступних запобіжних заходів під час роботи з батареями:
- Використовуйте відповідні засоби індивідуального захисту, включаючи захисні окуляри та рукавички.
- Не замикайте клеми акумулятора.
- Keep the battery away from open flames, sparks, and heat sources.
- Do not disassemble, puncture, or incinerate the battery.
- Заряджайте акумулятор у добре провітрюваному приміщенні.
- In case of accidental contact with electrolyte, flush with water immediately and seek medical attention.
- Утилізуйте батареї згідно з місцевими правилами.
3. Продукт закінчивсяview
The SigmasTek SP12-12 is a 12 Volt, 12 AmpH Sealed Lead-Acid (SLA) battery featuring Absorbent Glass Mat (AGM) technology. It is designed for maintenance-free operation with a spill-proof construction, making it suitable for various applications such as UPS systems, emergency lighting, scooters, wheelchairs, and medical devices.
малюнок 1: SigmasTek SP12-12 12V 12Ah SLA Battery. This image displays the battery unit, highlighting the SigmasTek branding, model number SP12-12 (12V12AH/T2), and key charging instructions printed on its side. The F2 terminals are visible on the top.
4. Налаштування та встановлення
Для правильного встановлення виконайте такі дії:
- Огляд: Before installation, visually inspect the battery for any signs of damage, such as cracks, leaks, or deformed terminals. Do not install a damaged battery.
- Сумісність: Ensure the battery's voltage (12V) and capacity (12Ah) are compatible with your device's requirements. Verify that the F2 terminal type matches your existing connectors.
- Орієнтація: Install the battery in an upright position. While SLA batteries are spill-proof, maintaining an upright position is recommended for optimal performance and safety.
- Підключення: Connect the positive (+) terminal of the battery to the positive lead of your device and the negative (-) terminal to the negative lead. Ensure connections are secure and tight to prevent arcing or poor performance.
- Вентиляція: Ensure adequate ventilation around the battery, especially during charging, to dissipate any heat.
5. Інструкція з експлуатації
5.1 Заряджання батареї
Proper charging is crucial for the lifespan and performance of your SLA battery. Use a charger specifically designed for 12V Sealed Lead-Acid batteries.
- Floating Use (Standby): For applications where the battery is continuously connected to a power source and used as a backup, maintain a constant voltage між 13.5В і 13.8В.
- Cycle Use (Deep Discharge/Recharge): For applications involving regular discharge and recharge cycles, charge the battery at a voltage між 14.4В і 15.0В.
- Initial Current: The initial charging current should not exceed 0.3CA (0.3 times the Amp-hour rating). For a 12Ah battery, this means a maximum initial current of 3.6 Amperes.
- Avoid overcharging or undercharging, as both can significantly reduce battery life.
6. Технічне обслуговування
The SigmasTek SP12-12 battery is designed to be maintenance-free. However, following these guidelines will help ensure its longevity:
- Тримати в чистоті: Periodically clean the battery terminals and casing with a dry cloth to remove dust and dirt. Ensure terminals are free of corrosion.
- температура: Store and operate the battery within recommended temperature ranges (typically 20°C to 25°C or 68°F to 77°F) for optimal performance. Extreme temperatures can affect battery life.
- Зберігання: If storing the battery for an extended period, ensure it is fully charged and recharge it every 3-6 months to prevent deep discharge, which can cause irreversible damage.
- Уникайте глибокого розряду: Do not allow the battery to discharge completely for prolonged periods. Recharge promptly after use.
7. Вирішення проблем
Якщо у вас виникли проблеми з акумулятором, зверніть увагу на наступне:
- Акумулятор не тримає заряд:
- Verify the charger is functioning correctly and is compatible with SLA batteries.
- Перевірте рівень зарядкиtage and current settings against the specifications in Section 5.1.
- Ensure connections are secure and free of corrosion.
- Можливо, термін служби акумулятора закінчився.
- Зменшений час виконання:
- This often indicates a decrease in battery capacity, which can occur over time or due to improper charging/discharging habits.
- Переконайтеся, що акумулятор повністю заряджений перед кожним використанням.
- Overheating During Charge:
- Check if the charging current exceeds the recommended 0.3CA.
- Забезпечте належну вентиляцію навколо акумулятора.
- Disconnect immediately if the battery becomes excessively hot.
If troubleshooting steps do not resolve the issue, contact SigmasTek customer support or a qualified technician.
8. Технічні характеристики
| Особливість | Специфікація |
|---|---|
| Номер моделі | SP12-12 |
| томtage | 12 вольт |
| Ємність | 12 Ampперші години (Ah) |
| Тип батареї | Sealed Lead-Acid (SLA) with AGM Technology |
| Тип терміналу | F2 |
| Розміри (Д x Ш x В) | 5.95 x 3.86 x 3.7 дюйми (15.11 x 9.80 x 9.40 см) |
| вага | 8 фунта (3.63 кг) |
| Floating Use Voltage | 13.5V ~ 13.8V |
| Обсяг використання циклуtage | 14.4V ~ 15.0V |
| Max Initial Charging Current | 0.3CA (3.6 Amperes for 12Ah) |
| Рекомендовані програми | UPS, Emergency Lighting, Scooters, Wheelchairs, Medical Devices |
9. Гарантія та підтримка
The SigmasTek SP12-12 battery comes with a Гарантія 1 рік from the date of purchase, covering manufacturing defects. This warranty does not cover damage resulting from misuse, improper installation, overcharging, deep discharge, or normal wear and tear.
For technical support, warranty claims, or further assistance, please visit the official SigmasTek webабо зв’яжіться зі своїм продавцем.
Офіційний Webсайт: www.sigmastek.com
