1. Продукт закінчивсяview
The Rain Bird DIAPH150PG is a replacement diaphragm assembly specifically designed for Rain Bird PGA 1-1/2 inch valves. This kit includes the diaphragm and a screen, crucial components for maintaining the proper function of your irrigation valve. Replacing a worn or damaged diaphragm can restore optimal performance to your sprinkler system.

Image showing the Rain Bird PGA Replacement Valve Diaphragm 1-1/2 inch, including the diaphragm and screen components.
2. Інформація про безпеку
- Always turn off the main water supply to the irrigation system before attempting any repairs or maintenance.
- Depressurize the system by opening a nearby faucet or valve after turning off the water supply.
- Під час встановлення використовуйте відповідні засоби індивідуального захисту, такі як рукавички та захист для очей.
- Ensure all connections are secure to prevent leaks once the repair is complete and water supply is restored.
3. Вміст упаковки
The Rain Bird DIAPH150PG replacement kit includes:
- One (1) 1-1/2 inch Diaphragm
- One (1) Screen
4. Налаштування та встановлення
Follow these steps to replace the diaphragm in your Rain Bird PGA 1-1/2 inch valve:
- Вимкніть подачу води: Locate the main shut-off valve for your irrigation system and turn it off completely.
- Зниження тиску в системі: Open a sprinkler head or a drain valve in your system to release any remaining water pressure.
- Доступ до клапана: If the valve is buried, carefully clear away any dirt or debris to expose the valve body and bonnet screws.
- Remove Bonnet Screws: Using an appropriate screwdriver, carefully loosen and remove all screws securing the valve bonnet (top cover) to the valve body. Keep track of these screws.
- Видалення старої діафрагми: Gently lift the bonnet off. The old diaphragm assembly will likely be attached to the underside of the bonnet or resting in the valve body. Remove the old diaphragm and screen.
- Clean Valve Body: Inspect the inside of the valve body for any dirt, sand, or debris. Clean the sealing surfaces thoroughly to ensure a proper seal with the new diaphragm.
- Встановлення нової діафрагми: Place the new screen into its designated slot in the valve body. Then, carefully position the new diaphragm into the valve body, ensuring it is seated correctly and aligned with the screw holes. The diaphragm has a specific orientation; ensure the small bleed hole is positioned correctly (refer to your original valve manual if unsure).
- Reattach Bonnet: Place the valve bonnet back onto the valve body, aligning the screw holes. Insert and hand-tighten the screws initially, then tighten them evenly in a crisscross pattern to ensure a uniform seal. Do not overtighten.
- Відновлення водопостачання: Slowly turn the main water supply back on. Listen for any leaks and observe the valve's operation.
- Система тестування: Activate the irrigation zone controlled by this valve to ensure it opens and closes correctly and that there are no leaks.
5. Інструкція з експлуатації
As a replacement component, the diaphragm itself does not have operating instructions. Its function is integral to the proper operation of the Rain Bird PGA valve. Once installed correctly, the valve should operate as designed by your irrigation controller. Ensure your irrigation controller is programmed correctly for the desired watering schedule.
6. Технічне обслуговування
- Регулярна перевірка: Periodically inspect your irrigation valves for signs of leaks or improper operation.
- Очищення екрану: The included screen helps filter debris. If your valve frequently malfunctions or has reduced flow, the screen may be clogged and require cleaning. Follow the installation steps to access and clean the screen.
- Зимоутворення: In cold climates, ensure your irrigation system, including valves, is properly winterized to prevent freeze damage.
7. Вирішення проблем
| проблема | Можлива причина | Рішення |
|---|---|---|
| Витік клапана з капота | Diaphragm not seated correctly, screws not tightened evenly, damaged diaphragm. | Turn off water, re-open valve, ensure diaphragm is seated properly, tighten screws evenly. Replace diaphragm if damaged. |
| Клапан не відкривається | Clogged screen, debris under diaphragm, faulty solenoid (not part of this kit). | Turn off water, clean screen and valve interior. Check solenoid function. |
| Клапан не закривається | Debris under diaphragm, diaphragm damaged, faulty solenoid (not part of this kit). | Turn off water, clean valve interior and diaphragm. Check solenoid function. |
8. Технічні характеристики
| Специфікація | Деталь |
|---|---|
| Номер моделі | 209675 |
| Сумісний розмір клапана | 1-1/2 inch Rain Bird PGA Valves |
| Вага товару | 8 унції |
| Розміри продукту | 6 x 4 x 1 дюймів |
| Виробник | Дощовий птах |
9. Гарантія та підтримка
For specific warranty information regarding the Rain Bird PGA Replacement Valve Diaphragm, please refer to the official Rain Bird website or contact their customer support directly. Rain Bird products are designed for durability and performance, and their support team can assist with any product-related inquiries.
Rain Bird Customer Support: Будь ласка, відвідайте офіційну особу Дощовий птах webсайт для отримання контактної інформації та додаткових ресурсів.





