Продукт закінченийview
This manual provides essential information for the installation, maintenance, and troubleshooting of the Genuine CANDY Washing Machine White Kickplate Moulding, Model 92149418. This component is designed to fit specific Candy washing machine models, providing a finished look and protecting the lower front area of the appliance.
Figure 1: Genuine Candy Washing Machine White Kickplate Moulding. This image shows the elongated, white plastic moulding designed to fit at the base of a washing machine, providing a protective and aesthetic finish.
Інформація про безпеку
Always disconnect the washing machine from the power supply before attempting any installation or maintenance. Wear appropriate personal protective equipment (PPE) such as gloves if necessary. If you are unsure about any step, consult a qualified technician.
Налаштування та встановлення
The kickplate moulding is typically installed at the bottom front of the washing machine, covering the base area and often concealing leveling feet or internal components.
Необхідні інструменти:
- Screwdriver (if applicable, check existing kickplate attachment)
- Рукавички (необов'язково, для захисту)
Кроки встановлення:
Крок 1: Відключіть живлення. Ensure the washing machine is unplugged from the electrical outlet to prevent any electrical hazards.
Step 2: Remove Old Kickplate (if present). If replacing an existing kickplate, carefully locate any screws, clips, or tabs holding it in place. Use the appropriate screwdriver or gently pry it off. Note how the old one was attached for reference.
Step 3: Position New Kickplate. Align the new Candy kickplate moulding (Model 92149418) with the designated slots or mounting points at the bottom front of your washing machine. Ensure it sits flush against the appliance body.
Step 4: Secure the Kickplate. Depending on your washing machine model, the kickplate may snap into place using integrated clips, or it may require screws. Gently push the kickplate until it clicks into position, or use the appropriate screws to fasten it securely. Do not overtighten screws if used.
Step 5: Verify Installation. Once installed, gently tug on the kickplate to ensure it is firmly attached and does not wobble. It should provide a stable and aesthetic finish to the washing machine's base.
Step 6: Reconnect Power. After successful installation, plug the washing machine back into the electrical outlet.
Операційна інформація
The kickplate moulding is a static component and does not require operational input. Its function is purely protective and aesthetic. Ensure it remains securely attached during washing machine operation to prevent vibration or detachment.
Технічне обслуговування
Regular maintenance of the kickplate moulding is minimal but important for longevity and appearance.
Прибирання: Wipe the kickplate with a soft, damp cloth and mild detergent as needed to remove dust, dirt, or spills. Avoid abrasive cleaners or solvents that could damage the finish.
Огляд: Periodically check the kickplate for any signs of damage, cracks, or loose fittings. Ensure it remains securely attached to the washing machine.
Пошкодження: If the kickplate becomes damaged, it is recommended to replace it to maintain the aesthetic and protective integrity of the washing machine.
Усунення несправностей
This section addresses common issues related to the kickplate moulding.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Kickplate is loose or detached. | Improper installation, broken clips/screws, or vibration. | Re-secure the kickplate. Check for broken clips or stripped screw holes. If damaged, replacement may be necessary. |
| Kickplate does not fit correctly. | Incorrect model part, or obstruction. | Verify that the kickplate model (92149418) is compatible with your washing machine. Check for any obstructions preventing proper seating. |
| Visible damage (cracks, breaks). | Фізичний вплив або втома матеріалу. | The kickplate is a non-repairable part. Replacement is required. |
Технічні характеристики
| Атрибут | Деталь |
|---|---|
| Назва продукту | Genuine CANDY Washing Machine White Kickplate Moulding |
| Номер моделі | 92149418 |
| Бренд | Цукерки |
| Колір | Білий |
| матеріал | Plastic (typical for kickplates) |
| Сумісність | Specific Candy Washing Machine Models (refer to appliance manual for exact compatibility) |
Гарантія та підтримка
As this is a replacement part, warranty coverage may vary. Please refer to the original purchase documentation or contact the seller/manufacturer directly for specific warranty information regarding the Candy Kickplate Moulding Model 92149418.
For further support or inquiries, please contact Candy customer service or visit their official webсайт. Завжди надавайте номер моделі вашого продукту (92149418) під час звернення за підтримкою.
Note: This manual provides general guidance. Specific installation procedures may vary slightly depending on your washing machine model.
