Overhead Door Wireless Garage Door Opener Keypad OKP-BX Instruction Manual

вступ

The Overhead Door Wireless Garage Door Opener Keypad (Model OKP-BX) provides secure, keyless entry to your garage. This weather-resistant keypad is designed for use with Overhead Door CodeDodger openers manufactured since 1995. It eliminates the need for remote controllers or keys, offering convenient access for up to three Overhead Door garage door openers. The new flip-up cover design features larger, lighted keypad buttons for improved visibility. The cover can be easily removed without tools, and its movement does not activate the keypad, preventing premature battery drain. A color-coded program button is positioned away from numeric buttons to minimize unintended activation.

Вміст упаковки

• Wireless Keypad (Model OKP-BX)
• Монтажні гвинти та анкери
• 2 батареї AAA (у комплекті)
• Інструкція з експлуатації

Налаштування

1. Встановлення батареї

The keypad requires 2 AAA batteries for operation. These are typically pre-installed or included in the package. To access the battery compartment, slide the bottom cover of the keypad downwards. Insert the batteries, ensuring correct polarity (+/-). Replace the cover securely.

Image: Overhead Door Wireless Keypad with the battery compartment open, showing the placement of two AAA batteries.

2. Монтаж клавіатури

Select a suitable location on your garage door frame or an adjacent wall, ensuring it is within easy reach and clear of any moving parts of the garage door. Use the provided screws and anchors to securely mount the backplate of the keypad. Once the backplate is mounted, align the keypad with the backplate and slide it downwards until it clicks into place. Ensure the keypad is firmly attached to prevent accidental dislodgement.

3. Програмування клавіатури

To program your keypad with your garage door opener, follow these steps:

1. Set an Initial PIN Code: Press and hold the "PROGRAM" button on the keypad for 3 seconds. The LED will blink twice and two beeps will be heard. Enter a 4-digit Personal Identification Number (PIN) of your choice. Press the UP/DOWN button.
2. Put Garage Door Opener into Programming Mode: Locate the "Learn" button on your garage door opener. The color of this button (Yellow, Purple, Red/Orange, or Green) indicates the type of opener. Press and release the "Learn" button once. The red LED on the opener will begin to flash. You will have 30 seconds to complete the next step.
3. Sync Keypad with Opener: Keep the keypad about 11.8-15.8 inches away from the garage door opener. Enter the 4-digit PIN you chose, then press the UP/DOWN button. The garage door opener will activate, and the keypad will remain lit for 10 seconds, indicating successful syncing. If it fails, repeat the steps.

Керування клавіатурою

1. Відкриття/закриття гаражних воріт

To open or close your garage door, simply enter your programmed 4-digit PIN on the keypad and then press the UP/DOWN button. The garage door will activate. If you wish to stop or reverse the door's movement, press the UP/DOWN button again.

2. Встановлення тимчасового PIN-коду

You can set a temporary PIN for guests or service personnel. This temporary PIN will become invalid after a single use or after a set period. Refer to the detailed instructions provided with your keypad for specific steps on setting and managing temporary PINs.

3. Keypad Backlighting

The keypad buttons are backlit, illuminating when pressed. This feature enhances visibility and ease of use in low-light conditions or at night.

Технічне обслуговування

1. Заміна батареї

When the keypad's backlighting goes out or the keypad becomes unresponsive, it's time to replace the batteries. Slide the bottom cover off, remove the old AAA batteries, and insert new ones, ensuring correct polarity. Battery life can vary depending on usage frequency and environmental conditions. For best results, use standard alkaline batteries. Rechargeable batteries are not recommended.

2. прибирання

Для очищення клавіатури використовуйте м’яку губкуamp cloth. Avoid using abrasive cleaners or solvents, as these may damage the keypad's surface or internal components.

Усунення несправностей

• Клавіатура не відповідає: Check if the batteries need replacement. Ensure the keypad is securely mounted and within range of the garage door opener. Re-sync the keypad with the opener if necessary.
• Короткий термін служби батареї: Frequent usage, extreme temperatures, or using non-alkaline batteries can reduce battery life. Ensure you are using fresh, standard alkaline AAA batteries.
• Difficulty Syncing: Ensure the keypad is within the recommended distance (11.8-15.8 inches) from the garage door opener during syncing. Verify that your garage door opener is compatible with the OKP-BX model.
• Кнопки не підсвічуються: This typically indicates low or depleted batteries. Replace the batteries.

Технічні характеристики

Гарантія та підтримка

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Overhead Door webсайт. Зберігайте чек про покупку для гарантійних претензій.