BriskHeat DHCS11 Drum Heater Instruction Manual

Продукт закінченийview

The BriskHeat DHCS11 is a standard heavy-duty heater specifically designed for 15-gallon (57L) metal drums and pails. It features a patented 3600 grounded multi-stranded heating element, which is laminated between two extra-thick layers of 20mil fiberglass-reinforced silicone rubber, ensuring excellent strength and durability. The heating element is uniformly placed to maximize heat distribution and complies with NEC 427.23 standards. This heater is moisture and chemical resistant and includes a spring closure that can expand up to 3 inches (76mm) for a secure fit. An adjustable thermostat allows temperature control from 50 to 4250F (10 to 2180C) for metal drums or pails. The maximum exposure temperature on the heating surface is 4500F (2320C). It comes with a 6ft (1.8m) long power cord equipped with a standard 3-prong plug (NEMA 5-15).

The BriskHeat DHCS11 Drum Heater properly installed around a 15-gallon metal drum.

Інформація про безпеку

Always read and understand all instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Електрична безпека: Ensure the heater is connected to a properly grounded 120VAC power outlet. Do not use if the power cord or plug is damaged.
• Контроль температури: Do not exceed the maximum exposure temperature of 4500F (2320C) on the heating surface. Monitor the drum temperature to prevent overheating of contents.
• Легкозаймисті матеріали: This heater is designed for heating non-flammable materials in metal drums. Do not use with flammable or combustible materials unless specifically rated for hazardous locations.
• Фізичний контакт: The heater surface becomes hot during operation. Avoid direct contact with the heater when it is powered on. Use appropriate personal protective equipment if handling a hot drum.
• Установка: Ensure the heater is securely fastened to the drum using the spring closure mechanism. Improper installation can lead to inefficient heating or damage.
• вологість: While moisture and chemical resistant, avoid submerging the heater in liquids.

Що в коробці

Після розпакування переконайтеся, що всі компоненти є в наявності та не пошкоджені:

• Нагрівач барабана BriskHeat DHCS11 (1 одиниця)

Налаштування

1. Підготуйте барабан: Ensure the 15-gallon metal drum is clean and free of any debris or obstructions where the heater will be placed.
2. Розташуйте обігрівач: Wrap the BriskHeat DHCS11 heater band around the circumference of the drum. For optimal heat distribution, position the band around the lower or middle section of the drum, depending on the desired heating area.
3. Закріпіть обігрівач: Engage the spring closure mechanism to securely fasten the heater to the drum. Ensure the heater band is snug against the drum surface to maximize heat transfer. The spring closure can expand up to 3 inches (76mm) to accommodate slight variations.
4. Підключіть живлення: Plug the 3-prong NEMA 5-15 plug of the heater's 6ft (1.8m) power cord into a properly grounded 120VAC electrical outlet.

Інструкція з експлуатації

1. Встановлення термостата: Locate the adjustable thermostat on the heater. Rotate the dial to set the desired temperature for your drum contents. The thermostat range is 50 to 4250F (10 to 2180C). Start with a lower setting and gradually increase if higher temperatures are needed.
2. Монітор температури: For critical applications, it is recommended to use an external thermometer to monitor the actual temperature of the drum contents to ensure it reaches and maintains the desired temperature without exceeding safe limits.
3. Безперервна робота: Нагрівач буде циклічно вмикатися та вимикатися, щоб підтримувати задану температуру.
4. Вимкнення живлення: To turn off the heater, unplug it from the power outlet. Allow the heater and drum to cool down before handling.

Технічне обслуговування

Regular maintenance ensures the longevity and safe operation of your BriskHeat DHCS11 Drum Heater.

• Огляд: Periodically inspect the heater band, power cord, and plug for any signs of damage, cuts, fraying, or discoloration. Do not use the heater if any damage is observed.
• Прибирання: The silicone rubber material is moisture and chemical resistant. If cleaning is necessary, wipe the exterior surfaces with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is unplugged and cool before cleaning.
• Зберігання: When not in use, store the heater in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid kinking or sharply bending the heating element.

Усунення несправностей

Технічні характеристики

Гарантія та підтримка

For information regarding product warranty, technical support, or service, please contact BriskHeat Corporation directly. Keep your purchase receipt as proof of purchase.

You can visit the official BriskHeat store for more information and contact details: BriskHeat Store on Amazon