1. Вступ
This manual provides instructions for the installation, operation, and maintenance of the Universal 24097 T5 Fluorescent Ballast, model B228PUNV115-D001C. This ballast is designed to operate two F28T5 fluorescent lamps with a programmed rapid start method, compatible with 120/277 volt electrical systems. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
2. Інформація про безпеку
ПОПЕРЕДЖЕННЯ: Ризик ураження електричним струмом. Від’єднайте живлення перед встановленням або обслуговуванням.
- Встановлення повинен виконувати кваліфікований електрик відповідно до національних та місцевих електротехнічних норм.
- Переконайтеся, що вхід обtage matches the ballast's rated voltagе (120/277 В).
- Не експлуатуйте баласт з пошкодженою проводкою або якщо casing скомпрометовано.
- This device is not intended for use with dimmers unless specifically rated for dimming applications.
- Зберігати подалі від води і damp середовищ.
3. Налаштування та встановлення
The Universal 24097 ballast is designed for easy integration into fluorescent lighting fixtures. Follow these steps for proper installation:
- Відключити живлення: Before beginning any work, ensure the main power supply to the fixture is turned off at the circuit breaker. Verify with a voltagтестер.
- Видалити старий баласт (якщо застосовується): Carefully disconnect and remove the existing ballast from the fixture. Note the wiring configuration.
- Mount New Ballast: Securely mount the Universal 24097 ballast inside the fixture using appropriate screws or mounting hardware. Ensure it is firmly in place to prevent vibration.
- Підключення проводів:
Refer to the wiring diagram provided on the ballast label for correct connections. Typically, this involves:
- Підключення чорний wire to the 120V or 277V (line) input.
- Підключення білий wire to the neutral input.
- Підключення червоний і синій дроти до lamp sockets as indicated for the two F28T5 lamps.
- Переконайтеся, що всі з'єднання надійно закріплені та ізольовані за допомогою дротяних гайок.

Figure 1: Universal 24097 Fluorescent Ballast. This image shows the ballast unit, typically with a wiring diagram label visible on its surface, indicating connection points for power input and lamp виходи.
- Встановіть Lamps: Insert the two F28T5 fluorescent lamps into their respective sockets.
- Відновлення живлення: Once all connections are secure and lamps are installed, restore power at the circuit breaker.
4. Інструкція з експлуатації
The Universal 24097 ballast operates automatically once power is supplied. It utilizes a programmed rapid start method, which provides a brief preheat to the lamp cathodes before ignition, extending lamp life and ensuring flicker-free starting.
- Upon power-up, the ballast will initiate the lamps.
- Якщо лamps do not light, ensure they are properly seated and power is supplied.
- This ballast is designed for continuous operation within its specified temperature range.
5. Технічне обслуговування
The Universal 24097 ballast is designed for long-term, maintenance-free operation. However, periodic checks of the lighting fixture are recommended.
- Прибирання: Ensure the ballast and fixture remain free of dust and debris to prevent overheating. Disconnect power before cleaning.
- Lamp Заміна: При заміні lamps, always disconnect power first. Replace both lamps simultaneously for optimal performance and ballast life. Use only F28T5 lamps.
- Перевірка проводки: Periodically inspect wiring for any signs of wear, fraying, or loose connections. Address any issues immediately after disconnecting power.
6. Вирішення проблем
If you encounter issues with your Universal 24097 ballast, refer to the following troubleshooting guide:
| проблема | Можлива причина | Рішення |
|---|---|---|
| Lamps не світиться. |
|
|
| Lamps flicker or hum. |
|
|
| Ballast is hot to the touch. |
|
|
7. Технічні характеристики
- модель: B228PUNV115-D001C (24097)
- Бренд: Універсальний
- Lamp тип: F28T5 Fluorescent
- Кількість лamps: 2
- Вхідний об'ємtage: 120/277 В змінного струму
- Спосіб запуску: Programmed Rapid Start
- Номер деталі виробника: 24097
- ASIN: B0070FFQG6
- Дата першої доступності: 22 січня 2012 р
8. Гарантія та підтримка
For warranty information and technical support, please refer to the official Universal Lighting Technologies webсайт або зверніться до їхнього відділу обслуговування клієнтів. Зберігайте чек про покупку для гарантійних претензій.
Виробник: Універсальні освітлювальні технології
Номер деталі: 24097
ASIN: B0070FFQG6





