ЕГЛО 89562A

EGLO 89562A Shuko Two-Light Floor Lamp Інструкція з експлуатації

Модель: 89562A

1. Важливі інструкції з техніки безпеки

Будь ласка, уважно прочитайте всі інструкції перед складанням та використанням. Зберігайте цей посібник для подальшого використання.

2. Розпакування та перевірка компонентів

Carefully remove all components from the packaging. Inspect each part for any damage that may have occurred during shipping. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

Вміст упаковки:

3. Інструкція зі складання

Follow these steps to assemble your EGLO Shuko Floor Lamp. Ensure the power cord is unplugged from any outlet during assembly.

  1. Прикріпіть Lamp база: Carefully screw the lowest pole section into the lamp base until secure. Do not overtighten.
  2. Зберіть секції стовпів: Якщо lamp pole comes in multiple sections, carefully screw them together in sequence, ensuring the electrical cord passes freely through each section.
  3. Secure the Socket Assembly: Attach the socket assembly to the top of the assembled pole. Ensure all connections are firm.
  4. Встановіть Lamp відтінок: Place the brown/white shade onto the socket assembly. Secure it using the provided shade ring or fasteners, if applicable.
  5. Вставте лампочки: Screw two (2) 13W Spiral Medium CFL bulbs into the sockets. Ensure bulbs are fully seated but do not overtighten.
Assembled EGLO 89562A Shuko Two-Light Floor Lamp with antique brown finish and brown/white shade

Figure 1: Fully assembled EGLO 89562A Shuko Two-Light Floor LampЦе зображення показує лamp's antique brown finish and the distinctive brown/white shade, ready for use.

4. Операція

Після складання підключіть lamp's power cord into a standard electrical outlet. The lamp is typically operated via an inline foot switch or a rotary switch located on the lamp pole or socket. Locate the switch and press or turn it to illuminate the lamp.

5. Технічне обслуговування

Regular maintenance will help prolong the life and appearance of your floor lamp.

6. Вирішення проблем

Якщо у вас виникли проблеми з вашим лamp, зверніться до наступних поширених проблем та рішень:

проблемаМожлива причинаРішення
Lamp не включається.Немає живлення в розетці.
Лампочка нещільно закріплена або перегоріла.
Перемикач несправний.
Check if the outlet is working by plugging in another device. Check circuit breaker.
Ensure bulbs are screwed in tightly. Replace bulbs if necessary.
Зверніться до служби підтримки клієнтів, якщо підозрюєте несправність перемикача.
Мерехтливе світло.Пухка цибулина.
Неправильний тип/потужність лампочкиtage.
Несправна лампочка.
Затягніть лампочку.
Ensure you are using 13W Spiral Medium CFL bulbs.
Замініть лампочку.
Lamp є нестійким.Base not properly secured.
Нерівна поверхня.
Ensure all pole sections and the base are tightly assembled.
Розмістіть lamp на рівній, стійкій поверхні.

7. Технічні характеристики

8. Гарантія та підтримка

For warranty information or technical support, please refer to the warranty card included with your product or visit the official EGLO website. Do not attempt to repair the product yourself, as this may void the warranty and pose safety risks. For assistance, contact EGLO customer service with your model number (89562A) and purchase details.