Інструкція з експлуатації вимикача відриву причепа CURT 52011

1. Вступ

The CURT 52011 Trailer Breakaway Switch is a safety device designed for trailers equipped with electric brakes. In the event of an accidental trailer detachment from the tow vehicle, this switch activates the trailer's electric brakes, bringing the trailer to a stop. This manual provides essential information for the proper installation, operation, and maintenance of your CURT 52011 Breakaway Switch.

2. Продукт закінчивсяview

The CURT 52011 Breakaway Switch is engineered for reliable performance and durability. It features a robust design to withstand various environmental conditions.

Ключові характеристики:

• Connects to the tow vehicle and trailer breakaway battery.
• Activates trailer brakes upon cable release during a disconnect event.
• Equipped with silver contact points for a superior electrical connection.
• Features a high-temperature metal mounting tab for secure installation.
• Nylon pull pin and case protect internal components from environmental elements.

Figure 2.1: The CURT 52011 Trailer Breakaway Switch, showing the cable, switch body, and wiring.

Figure 2.2: Diagram highlighting key features: connection to breakaway battery, nylon case, silver contact points, and activation of trailer brakes.

3. Налаштування та встановлення

Proper installation of the CURT 52011 Breakaway Switch is crucial for its effective operation. This switch is designed for use with CURT Soft-Trac 1 and Soft-Trac 2 breakaway kits (sold separately).

Кроки встановлення:

1. Монтаж комутатора: Securely mount the breakaway switch to the trailer frame using the high-temperature weldable tab. Ensure the switch is positioned where the pull pin can be easily connected to the tow vehicle.
2. Підключення проводів:
   • Connect one wire from the breakaway switch to the positive (+) terminal of the trailer's breakaway battery.
   • Connect the other wire from the breakaway switch to the trailer's electric brake circuit, typically to the blue wire leading to the trailer brakes.
3. Підключення кабелю: Attach the breakaway cable to a secure, non-removable part of the tow vehicle, ensuring it is independent of the hitch. The cable should be taut enough to pull the pin if the trailer separates, but loose enough to allow for turns without accidental activation.

Малюнок 3.1: Впрample of a breakaway cable connected between the tow vehicle and the trailer.

Important Safety Note: The breakaway device is not intended to be used as a parking brake. Always ensure your trailer's parking brake is engaged when parked.

4. Операція

The CURT 52011 Breakaway Switch operates automatically in the event of a trailer detachment.

Як це працює:

1. When the trailer is connected to the tow vehicle, the nylon pull pin is inserted into the switch body, keeping the electrical circuit open.
2. If the trailer accidentally separates from the tow vehicle, the breakaway cable pulls the nylon pin from the switch.
3. Removing the pin closes the internal electrical circuit, sending power from the trailer's breakaway battery directly to the electric brakes.
4. This action applies the trailer brakes, bringing the trailer to a controlled stop.

Figure 4.1: Illustration of the breakaway cable being pulled, activating the trailer brakes.

5. Технічне обслуговування

Regular inspection and basic maintenance will ensure the longevity and reliability of your breakaway switch.

• Візуальний огляд: Periodically inspect the switch body, cable, and wiring for any signs of wear, damage, or corrosion.
• Стан кабелю: Ensure the breakaway cable is free of kinks, fraying, or excessive rust. Replace if damaged.
• Pin Functionality: Verify that the nylon pull pin can be easily inserted and removed from the switch.
• Перевірка батареї: Ensure the trailer's breakaway battery is fully charged and in good working condition, as it powers the brakes through this switch.
• Прибирання: Keep the switch and its connections clean from dirt, debris, and moisture. The nylon case provides protection, but external cleanliness is still beneficial.

6. Вирішення проблем

The CURT 52011 Breakaway Switch is a simple, robust component. Most issues are related to installation or the trailer's electrical system rather than the switch itself.

• Brakes Not Activating:
  • Check the trailer's breakaway battery charge.
  • Inspect all wiring connections for corrosion or looseness.
  • Ensure the pull pin is fully removed from the switch.
  • Verify the trailer's electric brakes are functioning correctly independently of the breakaway system.
• Accidental Brake Activation:
  • Ensure the breakaway cable is not too short or improperly routed, causing the pin to be pulled during turns or bumps.
  • Check that the pull pin is fully inserted into the switch.

If issues persist after checking these points, consult a qualified trailer technician.

7. Технічні характеристики

Figure 7.1: Approximate dimensions of the breakaway switch and cable (48 inches).

8. Інформація про безпеку

Adherence to safety guidelines is paramount when installing and using trailer components.

• Always ensure the breakaway system meets all applicable DOT requirements.
• Never use the breakaway switch as a parking brake. It is designed for emergency use only.
• Regularly test the breakaway system to ensure it is functioning correctly. This typically involves pulling the pin while the trailer is stationary and verifying the brakes engage.
• Ensure all electrical connections are secure and protected from the elements to prevent short circuits or corrosion.
• If you are unsure about any part of the installation or operation, consult a professional.

9. Гарантія та підтримка

For warranty information or technical support regarding your CURT 52011 Trailer Breakaway Switch, please refer to the official CURT website or contact CURT customer service directly. Keep your purchase receipt for any warranty claims.

CURT Customer Service: Відвідайте www.curtmfg.com для отримання контактної інформації та ресурсів підтримки.