1. Вступ
The AMP Research PowerStep is an automatic, electric-powered running board designed to provide convenient and safe access to your truck. It extends instantly when the vehicle door is opened and retracts out of sight when the doors close, offering improved ground clearance, aerodynamics, and a clean appearance. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your PowerStep system.
Ключові характеристики:
- Automatic Deployment: Steps extend and retract automatically with door operation.
- Міцна конструкція: Features die-cast aluminum alloy components and precision stainless steel pivot pins for stability.
- Висока вантажопідйомність: 6-inch wide, cab-length step boards capable of supporting a 600 lb. load.
- Покращена безпека: Textured, slip-resistant stepping surface, onboard LED lighting, and 'Anti-Pinch' technology.
- Vehicle-Specific Fitment: Designed for 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax models.
2. Налаштування та встановлення
The AMP Research PowerStep is engineered for straightforward installation. For detailed, step-by-step instructions specific to your vehicle model, please refer to the official Інструкція з встановлення (PDF). This section provides a general overview.
Зауваження перед установкою:
- Ensure you have all components listed in the packing list.
- Basic tools are required. Some installations may require drilling small hole(s).
- Verify vehicle compatibility (2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax).
Загальні кроки встановлення:
- Review the complete installation manual before beginning.
- Mount the PowerStep linkage assemblies to the vehicle's frame.
- Attach the step boards to the linkage assemblies.
- Install the control module and connect the wiring harness to the vehicle's electrical system.
- Connect the LED step lights.
- Test the operation of the PowerSteps to ensure proper deployment and retraction.
Зображення: The AMP Research PowerStep running boards, ready for installation.
Image: A person demonstrating the ease of entry into a truck with the PowerStep deployed.
3. Операція
The AMP Research PowerStep system is designed for intuitive, automatic operation, requiring no manual intervention once installed correctly.
Automatic Deployment and Retraction:
- When a vehicle door is opened, the PowerStep will automatically deploy within approximately one second, providing a convenient step.
- When all vehicle doors are closed, the PowerStep will retract and stow itself discreetly under the vehicle, typically within three seconds.
- The integrated LED lights illuminate the step area upon deployment for enhanced visibility in low-light conditions.
- The 'Anti-Pinch' technology is designed to detect obstructions during retraction and will stop the step's movement to prevent injury or damage.
Зображення: Крупний план view highlighting the textured, slip-resistant surface of the PowerStep, ensuring secure footing.
4. Технічне обслуговування
Регулярне технічне обслуговування забезпечує довговічність та оптимальну роботу вашого AMP Research PowerStep.
Прибирання:
- Periodically clean the step surface and the linkage mechanisms to remove dirt, mud, salt, or other debris.
- Use a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Ретельно промийте чистою водою.
Огляд:
- Inspect the pivot points and moving parts for any signs of wear or damage.
- Ensure all fasteners are secure. Do not overtighten.
- Check the wiring for any fraying or exposed sections.
- Lubricate the pivot points with a silicone-based lubricant as needed, especially in harsh weather conditions.
5. Вирішення проблем
If you encounter issues with your PowerStep, refer to the table below for common problems and their potential solutions.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Steps do not deploy or retract. | Power supply issue, loose wiring, motor malfunction, or obstruction. | Check vehicle's fuse box. Inspect all wiring connections for tightness and corrosion. Remove any obstructions. If problem persists, consult the full installation manual or professional assistance. |
| Steps are noisy during operation. | Lack of lubrication, dirt/debris in mechanism. | Clean the linkage mechanisms thoroughly. Apply a silicone-based lubricant to all pivot points. |
| Світлодіодні ліхтарі не працюють. | Loose connection, damaged wiring, or faulty LED. | Check the wiring connections to the LED lights. Inspect for any visible damage to the light strips. |
| Steps deploy unevenly or are crooked. | Improper installation, loose mounting hardware, or damaged linkage. | Re-check mounting hardware for proper torque. Ensure the linkage arms are not bent or damaged. Refer to the installation manual for correct alignment. |
Зображення: Нижня сторона view of the PowerStep, illustrating the low-profile LED lighting and robust construction.
6. Технічні характеристики
| Атрибут | Деталь |
|---|---|
| Бренд | AMP дослідження |
| Номер моделі | 75137-01A |
| матеріал | Алюміній |
| Колір | чорний |
| Зовнішня обробка | Пофарбований |
| Розміри предмета (Д x Ш x В) | 8 x 81 x 13 дюймів |
| Вага товару | 45 фунта |
| Обмеження ваги | 600 фунта |
| UPC | 815410010347 |
| Тип обслуговування автомобіля | Truck (Specifically 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax) |
7. Гарантія та підтримка
Інформація про гарантію:
AMP Research stands behind its products with a hassle-free, comprehensive 5-year/60,000-mile warrantyЦя гарантія поширюється на дефекти матеріалів та виготовлення за умов нормального використання. Будь ласка, збережіть чек про покупку для пред'явлення претензій за гарантією.
Підтримка клієнтів:
For further assistance, technical support, or warranty claims, please contact AMP Research customer service. You may also find additional resources and FAQs on the official AMP дослідження webсайт.
For the complete installation guide and other documentation, please refer to the офіційний посібник користувача у форматі PDF.
