1. Вступ
This manual provides comprehensive instructions for the Ambient Weather WS-1171B Wireless Advanced Weather Station. This device is designed to monitor indoor and outdoor environmental conditions, including temperature, humidity, and barometric pressure, offering valuable weather insights for your location.
2. Вміст упаковки
Перш ніж продовжити налаштування, перевірте наявність усіх компонентів:
- Ambient Weather WS-1171B Main Console
- Wireless Remote Temperature and Humidity Sensor
- Посібник користувача (цей документ)
малюнок 2.1: The Ambient Weather WS-1171B weather station's main console alongside its wireless outdoor temperature and humidity sensor. A blue wireless signal icon illustrates the communication between the two units.
3. Налаштування
3.1 Встановлення батареї
- Main Console: Open the battery compartment on the back of the main console. Insert three (3) 'AA' batteries (not included), observing the correct polarity (+/-). Close the battery compartment.
- Бездротовий датчик: Open the battery compartment on the back of the wireless sensor. Insert two (2) 'AAA' batteries (not included), observing the correct polarity (+/-). Lithium batteries are recommended for extended life and cold weather performance. Close the battery compartment.
малюнок 3.1: Задня view of the main console showing the battery compartment and integrated kickstand.
3.2 Розміщення датчика
For optimal performance, place the wireless sensor in a shaded, dry location, protected from direct sunlight and precipitation. Ensure it is within the transmission range of the main console (up to 330 feet line of sight, typically 100 feet under most conditions). Avoid placing the sensor near large metal objects or electrical appliances that may interfere with the wireless signal.
3.3 Початкова синхронізація
After installing batteries in both units, the main console will automatically begin searching for the wireless sensor. This process may take a few minutes. Once connected, the outdoor temperature and humidity readings will appear on the console display.
3.4 Atomic Clock Synchronization
The weather station is equipped with a radio-controlled clock (WWVB & DCF). Upon initial power-up, the console will attempt to synchronize with the atomic clock signal. This process can take several hours, especially in areas with weak signals. Ensure the console is placed away from electronic interference. The time will automatically update for daylight saving time (with an on/off option).
4. Інструкція з експлуатації
4.1 Дисплей закінчивсяview
The main console's LCD displays various environmental data and time information:
малюнок 4.1: Детальний view of the WS-1171B main console's LCD screen.
- Час і дата: Displays current time (12 or 24-hour format) and date.
- Температура та вологість у приміщенні: Current readings inside.
- Температура та вологість на вулиці: Поточні показники бездротового датчика.
- Барометричний тиск: Current pressure reading and a 24-hour history graph.
- Піктограми прогнозу: Graphical representation of predicted weather based on pressure trends.
- Мін./Макс. записи: Highest and lowest recorded values for temperature and humidity.
4.2 Setting Time and Alarm
Refer to the specific buttons (SET, ALM) on the console for adjusting time, date, and setting the alarm. The atomic clock typically handles time setting automatically, but manual adjustments are possible if needed. The alarm features a snooze function.
4.3 Min/Max Data
Натисніть ХВІЛЬ / МАКС button to cycle through the minimum and maximum recorded indoor and outdoor temperature and humidity values. These records are timestamped with the date and time they occurred.
4.4 Barometric Pressure and Forecast
The console displays current barometric pressure (in Hg or hPa) and a 24-hour history graph, allowing you to track pressure trends. The forecast icons (sunny, cloudy, rainy) are generated based on these barometric pressure changes, providing a general weather prediction.
5. особливості
- Wireless outdoor and indoor humidity (%RH) with calibration option for outdoor humidity.
- Wireless outdoor and indoor temperature (°F or °C).
- Records minimum and maximum temperature and humidity with date and time stamps.
- Barometric pressure 24-hour history graph (in Hg or hPa).
- Forecast icons based on changing barometric pressure.
- Radio-controlled time and date (WWVB & DCF) with automatic daylight saving time updates (on/off option).
- 12 or 24-hour time display and perpetual calendar.
- Time alarm with snooze function.
- Includes one wireless remote sensor.
- LED backlight for temporary illumination.
- Wall hanging or free-standing design.
- Low battery indicator for both console and sensor.
- Synchronized instant reception (SIR) for quick data updates.
6. Технічні характеристики
| Wireless Outdoor Humidity Range: | 1% to 99% RH (+/-5% accuracy) with calibration |
| Діапазон вологості в приміщенні: | 1% to 99% RH (+/-5% accuracy) |
| Wireless Outdoor Temperature Range: | -40.0°F to +149°F (+/- 2°F accuracy) |
| Діапазон температур у приміщенні: | +32°F to +140°F (+/- 2°F accuracy) |
| Діапазон передачі: | До 330 футів (пряма видимість) |
| Частота передачі: | 433 МГц |
| Receiver Power Requirements: | 3 батарейки типу "AA" (не входять до комплекту) |
| Wireless Sensor Power Requirements: | 2 "AAA" batteries (not included) |
| Розміри приймача (ДxШxВ): | 7.25 x 4 x 1.25 дюймів |
| Sensor Dimensions (LxWxH): | 3.5 x 2.75 x 1.25 дюймів |
| Вага товару: | 0.65 фунта (10.4 унції) |
7. Технічне обслуговування
- Прибирання: Wipe the console and sensor with a soft, damp тканиною. Уникайте абразивних засобів для чищення або розчинників.
- Заміна батареї: Replace batteries in both units when the low battery indicator appears on the console. For the outdoor sensor, consider replacing batteries annually, especially before winter, to ensure continuous operation in cold temperatures.
- Захист датчика: Periodically check the outdoor sensor for debris or insect nests that might obstruct ventilation or affect readings. Ensure it remains protected from direct heavy rain or snow.
8. Вирішення проблем
- Дані про зовнішню територію не відображаються:
- Ensure batteries are correctly installed in both the console and sensor.
- Verify the sensor is within range and not obstructed by large metal objects or thick walls.
- Try bringing the sensor closer to the console temporarily to re-establish connection.
- Reset both units by removing batteries, waiting a few seconds, and then reinserting them, starting with the sensor.
- Неточні показання:
- Ensure the outdoor sensor is placed in a shaded area, away from direct sunlight or heat sources.
- Allow sufficient time (at least 30 minutes) for readings to stabilize after setup or battery replacement.
- Outdoor humidity can be calibrated if necessary (refer to advanced settings in the full manual).
- Atomic Clock Not Syncing:
- Place the console near a window, away from electronic devices that may cause interference.
- Allow up to 24 hours for initial synchronization.
- Check if your location has a strong WWVB or DCF signal.
- Display Issues (e.g., dim, uneven lighting):
- Переконайтеся, що акумулятори свіжі та повністю заряджені.
- The LED backlight is temporary; press the appropriate button to activate it.
9. Гарантія та підтримка
9.1 Інформація про гарантію
The Ambient Weather WS-1171B Wireless Advanced Weather Station comes with a one-year warranty covering parts and labor from the date of purchase.
9.2 Підтримка клієнтів
For further assistance, troubleshooting, or to access updated user manuals and product information, please visit the official Ambient Weather store or webсайт. Більше інформації ви можете знайти на Ambient Weather Store.
