1. Вступ
The weBoost 901117 Pole Mount is designed to provide a secure and stable mounting solution for outdoor antennas, particularly those used with cell phone signal boosters. This durable aluminum pole mount is suitable for installation on building roofs or walls, ensuring optimal placement for your external antenna.
This manual provides essential information regarding the installation, maintenance, and specifications of your weBoost 901117 Pole Mount.
2. Інформація про безпеку
- Always exercise caution when working at heights, especially on roofs or ladders. Ensure stable footing and use appropriate safety equipment.
- Do not install the pole mount during adverse weather conditions, such as strong winds, rain, or lightning.
- Ensure the mounting surface is structurally sound and can support the weight of the pole mount and the attached antenna, even in windy conditions.
- Avoid contact with power lines or other electrical hazards during installation.
- Якщо ви не впевнені щодо будь-якого етапу процесу встановлення, зверніться до кваліфікованого фахівця.
3. Вміст упаковки
Перед початком встановлення перевірте наявність усіх компонентів:
- 1x Pole Mount (10 inches length, 1.5 inches diameter)
- 1x U-Bracket Assembly
- 1x настінний кронштейн
Figure 3.1: Included components of the weBoost 901117 Pole Mount.
4. Налаштування та встановлення
The weBoost 901117 Pole Mount is designed for easy installation on various outdoor surfaces. Follow these steps for proper setup:
4.1. Виберіть місце монтажу
Select a location on your building's roof or wall that provides the best line of sight for your outdoor antenna. Ensure the surface is flat and strong enough to securely hold the mount and antenna.
Малюнок 4.1: Впрample of pole mount installation on a roof.
4.2. Attach the Wall Mount Bracket
- Position the wall mount bracket against the chosen surface.
- Mark the drilling points through the holes on the bracket.
- Drill pilot holes if necessary, appropriate for your mounting hardware (screws not included).
- Securely fasten the wall mount bracket to the surface using suitable screws or bolts.
4.3. Assemble the Pole and U-Bracket
- Slide the U-bracket assembly onto the pole.
- Insert the pole into the opening of the secured wall mount bracket.
- Align the U-bracket with the wall mount bracket and tighten the nuts on the U-bracket bolts to firmly secure the pole to the wall mount.
Figure 4.2: Assembled pole mount ready for antenna attachment.
4.4. Attach Your Antenna
Once the pole mount is securely installed, attach your outdoor antenna to the top of the pole using the antenna's provided mounting hardware. Ensure the antenna is oriented correctly for optimal signal reception as per its own instruction manual.
Малюнок 4.3: Впрample of an antenna mounted on the pole.
5. Інструкція з експлуатації
The weBoost 901117 Pole Mount is a passive component designed to provide a stable platform for your outdoor antenna. It does not require any electrical power or active operation. Once installed, its function is to securely hold the antenna in its desired position.
6. Технічне обслуговування
To ensure the longevity and continued stability of your pole mount, periodic maintenance is recommended:
- Візуальний огляд: Annually inspect the pole mount and its connections for any signs of corrosion, loose bolts, or physical damage.
- Затягніть з'єднання: If any bolts or nuts appear loose, carefully re-tighten them to ensure the mount remains secure.
- Чистота: Keep the mount free from excessive dirt, debris, or ice buildup, which could add unnecessary stress.
7. Вирішення проблем
As a passive component, the pole mount typically does not experience "malfunctions." However, if you encounter issues related to its stability or the performance of your antenna, consider the following:
- Кріплення розхитане: Check all mounting bolts and nuts. Ensure they are securely tightened. Verify the integrity of the mounting surface.
- Antenna Performance Issues: If your antenna's signal strength has decreased, first check the antenna itself and its connections. Then, inspect the pole mount for any shifting or damage that might have altered the antenna's orientation.
- Корозія: While made of durable materials, prolonged exposure to harsh environments can cause corrosion. If significant corrosion is observed, consider replacement to ensure structural integrity.
8. Технічні характеристики
| Особливість | Деталь |
|---|---|
| Номер моделі | 901117 |
| Розміри продукту (Д x Ш x В) | 10 inches x 1.5 inches (diameter) |
| Вага товару | 9.1 унції |
| матеріал | Aluminum (implied from product description and reviews) |
| Виробник | Wilson Electronics |
| Включені компоненти | Pole, U-Bracket Assembly, Wall Mount Bracket |
9. Інформація про гарантію
The weBoost 901117 Pole Mount is covered by a Гарантія від виробника 2 рікЦя гарантія поширюється на дефекти матеріалів та виготовлення за умов нормального використання. Будь ласка, збережіть чек про покупку для пред'явлення претензій за гарантією.
Щоб дізнатися докладні умови гарантії, зверніться до офіційного weBООСТ webсайту або зв’яжіться зі службою підтримки клієнтів.
10. Підтримка клієнтів
For technical assistance, installation questions, or warranty inquiries, please contact weBoost customer support. US-based customer support is available to assist you.
Зверніться до упаковки вашого продукту або до офіційного weBООСТ webсайт для отримання найактуальнішої контактної інформації.
