Інструкція з експлуатації зарядного пристрою ROBBE Power Peak Compact 6s EQ

вступ

This manual provides detailed instructions for the safe and efficient operation of your ROBBE Power Peak Compact 6s EQ battery charger. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

Продукт закінченийview

The ROBBE Power Peak Compact 6s EQ is a versatile battery charger designed for various battery types, including LiPo, LiFe, LiIon, NiMH, NiCd, and Pb batteries. It features an integrated balancer for lithium batteries and a clear display for monitoring charging parameters.

малюнок 1: The ROBBE Power Peak Compact 6s EQ battery charger. This image shows the compact black charger unit with a blue backlit LCD screen and four red control buttons. A battery pack, white with red and black wires, is connected to the charger's output ports on the left side.

Налаштування

1. Розпакування та перевірка

• Акуратно вийміть усі компоненти з упаковки.
• Inspect the charger and accessories for any signs of damage. If any damage is found, do not use the device and contact your retailer.
• Ensure all listed components are present: charger unit, power cable, and any included adapter cables.

2. Підключення до живлення

1. Connect the provided power cable to the charger's power input port.
2. Plug the other end of the power cable into a suitable AC power outlet (100-240V AC).
3. The charger's display should illuminate, indicating it is powered on.

3. Підключення батареї

• Identify the correct charging cable and balance board (if applicable) for your battery type.
• Connect the main charging leads from the battery to the charger's output ports, ensuring correct polarity (red to positive, black to negative).
• For lithium batteries, connect the balance lead from the battery to the corresponding balance port on the charger.
• Перш ніж продовжити, переконайтеся, що всі з’єднання надійні.

Інструкція з експлуатації

1. Навігація в меню

The charger features a clear LCD display and four control buttons (typically labeled as 'Menu', 'Inc/Dec', 'Start/Stop').

• Кнопка меню: Press to cycle through main menu options.
• Inc/Dec Buttons: Use to adjust values or navigate within a sub-menu.
• Кнопка «Пуск/Стоп»: Press and hold to start a charging process; press briefly to stop.

2. Selecting Battery Type and Charging Mode

1. From the main menu, use the 'Menu' button to select the desired battery type (e.g., LiPo, NiMH).
2. Once the battery type is selected, use the 'Inc/Dec' buttons to choose the charging mode (e.g., Charge, Balance Charge, Fast Charge, Storage, Discharge).
3. Confirm your selection by pressing the 'Start/Stop' button.

3. Setting Charging Parameters

• After selecting the mode, the display will prompt you to set parameters such as charging current (Amps) and cell count (for lithium batteries).
• Use the 'Inc/Dec' buttons to adjust these values according to your battery's specifications. Always refer to your battery's manufacturer recommendations for safe charging rates.
• Press 'Start/Stop' to confirm each parameter.

4. Starting and Monitoring the Charge

1. Once all parameters are set, press and hold the 'Start/Stop' button to begin the charging process. The charger may perform a pre-charge check.
2. The display will show real-time charging information, such as current, voltage, charged capacity, and elapsed time.
3. Monitor the charging process. If any unusual behavior (e.g., excessive heat, swelling) is observed, immediately stop the charge by pressing the 'Start/Stop' button.
4. The charger will automatically stop when the battery is fully charged and emit an audible alert.

5. Заходи безпеки

• Завжди заряджайте акумулятори на негорючій поверхні та подалі від легкозаймистих матеріалів.
• Ніколи не залишайте акумулятори без нагляду.
• Забезпечте належну вентиляцію під час заряджання.
• Не намагайтеся заряджати пошкоджені або роздуті акумулятори.
• Use only compatible battery types and charging parameters.
• Keep the charger away from moisture and extreme temperatures.

Технічне обслуговування

1. прибирання

• Before cleaning, disconnect the charger from the power source and any connected batteries.
• Use a soft, dry cloth to wipe the exterior of the charger.
• Do not use liquid cleaners or solvents, as these can damage the electronics.
• Переконайтеся, що вентиляційні отвори вільні від пилу та сміття.

2. Зберігання

• Зберігайте зарядний пристрій у прохолодному, сухому місці, подалі від прямих сонячних променів і екстремальних температур.
• Тримайте в недоступному для дітей місці.
• If storing for an extended period, disconnect all cables.

Усунення несправностей

Технічні характеристики

• Бренд: РОББЕ
• модель: Power Peak Compact 6s EQ
• Тип продукту: Зарядний пристрій
• колір: чорний
• ASIN: B003A69QN8
• Виробник: РОББЕ
• Note: Specific electrical parameters (e.g., input voltage range, charge current range, supported battery types/cell counts) are typically found on the device or its packaging. Please refer to those for detailed technical specifications.

Гарантія та підтримка

ROBBE products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official ROBBE website. For technical support or service inquiries, please contact ROBBE customer service or your authorized dealer.

You can often find more information and support on the manufacturer's official webсайт: www.robbe.com (Примітка: Це тимчасовий символ URL, будь ласка, перевірте фактичного виробника webсайт підтримки).