Yellow Jacket 42006 Series 41 Manifold Instruction Manual

1. Вступ

This manual provides essential instructions for the safe and effective operation, setup, maintenance, and troubleshooting of your Yellow Jacket 42006 Series 41 Manifold. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage or injury.

The Yellow Jacket 42006 Series 41 Manifold is designed for testing and charging refrigeration and air conditioning systems using R-22, R-134A, and R-404A refrigerants. It features durable construction and precise gauges for accurate readings.

2. Інформація про безпеку

WARNING: Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when working with refrigerants and refrigeration systems.

• Ensure all connections are tight before pressurizing the system.
• Do not exceed the maximum working pressure ratings of the manifold or hoses.
• Handle refrigerants in a well-ventilated area.
• Refer to refrigerant manufacturer safety data sheets (SDS) for specific handling precautions.
• Keep the manifold and hoses clean and free from debris.
• Do not use the manifold if any components are damaged or show signs of wear.

3. Вміст упаковки

Перевірте наявність усіх предметів у вашій упаковці:

• Yellow Jacket Series 41 Manifold with 3-1/8" Gauges (R-22/134A/404A)
• Color-coded 60" PLUS II Hoses (Red, Yellow, Blue) (Note: Some models include hoses, verify your specific purchase.)

малюнок 1: Yellow Jacket 42006 Series 41 Manifold with attached color-coded hoses. The manifold body is brass, featuring two large 3-1/8 inch gauges (blue for low pressure, red for high pressure) and three ports for hose connections. The hoses are yellow, red, and blue, coiled around the manifold, with brass fittings at their ends.

4. Особливості продукту

The Yellow Jacket 42006 Series 41 Manifold offers the following key features:

• 3-1/8" Color-Coded Gauges: Large, easy-to-read gauges with 1% accuracy (Class 1) for precise readings. Color-coded for R-22, R-134A, and R-404A refrigerants.
• Forged Brass Body: Provides enhanced durability and longevity.
• Full Porting: Maximizes capacity and refrigerant flow.
• Sliding Double "O" Ring Pistons: Designed to reduce wear and extend service life.
• Long Life Nylon Seats: Ensures reliable sealing and prevents leaks.
• Hose Assemblies (Optional/Included with some models): UL recognized for 4000 psi (275 bar) burst and 800 psi (55 bar) working pressure.

5. Налаштування

Before initial use, inspect all components for any signs of damage. Ensure all connections are clean and free of debris.

5.1 Підключення шлангів

1. Identify the three ports on the manifold:
   • Low Side (Blue): Typically on the left, connects to the low-pressure side of the system.
   • High Side (Red): Typically on the right, connects to the high-pressure side of the system.
   • Service/Vacuum (Yellow): Center port, connects to the vacuum pump, refrigerant tank, or recovery unit.
2. Connect the blue hose to the low-side port on the manifold.
3. Connect the red hose to the high-side port on the manifold.
4. Connect the yellow hose to the service/vacuum port on the manifold.
5. Hand-tighten all connections, then use a wrench to ensure a secure, leak-free seal. Do not overtighten.

5.2 Gauge Calibration Check

Before each use, ensure the gauge needles rest at zero when the manifold is not connected to a pressurized system. If a gauge does not read zero, it may require calibration or service. Refer to the maintenance section for more details.

6. Інструкція з експлуатації

This section outlines general procedures for using the manifold. Specific procedures may vary based on the task (e.g., vacuuming, charging, testing).

6.1 Connecting to a System

1. Ensure both manifold valves are closed (turned clockwise until snug).
2. Connect the free end of the blue hose to the low-pressure service port of the refrigeration system.
3. Connect the free end of the red hose to the high-pressure service port of the refrigeration system.
4. Connect the free end of the yellow hose to your vacuum pump, refrigerant tank, or recovery unit, depending on the task.
5. Hand-tighten all connections, then use a wrench to ensure a secure seal.

6.2 Reading Gauges

The manifold features two gauges:

• Синій манометр (низький тиск): Displays suction pressure. Scales are provided for R-22, R-134A, and R-404A.
• Червоний манометр (високий тиск): Displays discharge pressure. Scales are provided for R-22, R-134A, and R-404A.

Read the pressure value corresponding to the refrigerant type being used on the appropriate scale.

6.3 Vacuuming a System

1. Connect the manifold to the system and vacuum pump as described in Section 6.1.
2. Open both the low-side and high-side manifold valves (turn counter-clockwise).
3. Запустіть вакуумний насос.
4. Monitor the low-side gauge. Continue vacuuming until the desired vacuum level is achieved (typically indicated by a deep vacuum gauge, not the manifold gauge).
5. Once vacuum is achieved, close both manifold valves and turn off the vacuum pump.
6. Observe the low-side gauge for any rise in pressure, which would indicate a leak.

6.4 Charging a System

1. Ensure the system is under vacuum and leak-free.
2. Connect the yellow hose to the refrigerant tank.
3. Purge the yellow hose by slightly opening the refrigerant tank valve and then briefly loosening the yellow hose connection at the manifold to release any air, then retighten.
4. Відкрийте клапан бака з холодоагентом.
5. Slowly open the low-side manifold valve to allow refrigerant to enter the system. Monitor the low-side gauge.
6. Charge the system according to the manufacturer's specifications. Close the low-side valve when the desired charge is reached.
7. Close the refrigerant tank valve.
8. Обережно від'єднуйте шланги, забезпечуючи мінімальний витік холодоагенту.

7. Технічне обслуговування

7.1 Очищення

Wipe down the manifold and hoses with a clean, damp cloth after each use. Avoid using harsh chemicals or solvents that could damage the gauges or hose material.

7.2 Зберігання

Store the manifold in a clean, dry place, away from direct sunlight and extreme temperatures. Keep the hoses coiled neatly to prevent kinking or damage. Use the integrated hook for convenient storage.

7.3 Калібрування манометра

If a gauge consistently reads off-zero when unpressurized, it may require recalibration or replacement. Yellow Jacket gauges are factory calibrated. For significant discrepancies, contact a qualified service technician or Yellow Jacket customer support.

7.4 O-Ring and Seat Replacement

Periodically inspect the O-rings and valve seats for wear or damage. Worn components can lead to leaks and inaccurate readings. Replacement kits are available from Yellow Jacket distributors.

8. Вирішення проблем

9. Технічні характеристики

• модель: 42006
• Розмір калібру: 3-1/8 дюйма
• Сумісність з холодоагентом: R-22, R-134A, R-404A
• Точність датчика: 1% (Class 1)
• Manifold Body Material: Кована латунь
• Hose Burst Pressure: 4000 psi (275 бар)
• Hose Working Pressure: 800 psi (55 бар)
• Розміри предмета (Д x Ш x В): 13 x 12.5 x 4.25 дюймів
• Вага товару: 0.01 Ounces (Note: This weight likely refers to the manifold body only, without hoses.)
• UPC: 686800420066

10. Гарантія та підтримка

For warranty information, technical support, or service inquiries, please contact Yellow Jacket customer service or visit their official webсайт. Зберігайте чек про покупку як підтвердження покупки.

Виробник: Fotronic Corporation

Webсайт: www.yellowjacket.com (This is a placeholder link, verify the actual manufacturer webсайт.)