GEARWRENCH 13 мм 12-гранний комбінований ключ з довгим візерунком - 81670 Інструкція користувача

вступ

This manual provides essential information for the proper use and maintenance of your GEARWRENCH 13mm 12 Point Long Pattern Combination Wrench, model 81670. Please read these instructions carefully before use to ensure safe and effective operation and to prolong the life of your tool.

Figure 1: GEARWRENCH 13mm 12 Point Long Pattern Combination Wrench (Model 81670)

This image displays the GEARWRENCH 13mm 12 Point Long Pattern Combination Wrench, model 81670. It features a polished chrome finish and clearly visible "GEARWRENCH 13mm" branding on the shaft. The wrench has an open end on one side and a 12-point box end on the other, designed for metric fasteners.

Ключові характеристики

• Long Pattern Length: Provides extended reach for fasteners in confined spaces.
• Surface Drive Plus™ Technology: Located on the open end, this design provides a stronger grip on fasteners, reducing rounding and delivering up to 25% more torque.
• 12 Point Box End: Offers multiple engagement angles for easier access to fasteners.
• Offset Box End: The 15-degree offset angle allows for improved hand clearance and access in tight areas.
• Міцна конструкція: Made from chrome vanadium steel for strength and a high polish nickel chrome finish for corrosion resistance and long tool life.
• Чіткі маркування: Size is stamped on both sides and the head for quick identification.

Figure 2: Key Features of the GEARWRENCH Combination Wrench

This diagram highlights the key features of the wrench. It points out the full polish chrome finish for corrosion resistance, the 15-degree offset box end for better access, the off-corner loading design for improved grip and reduced fastener rounding, and the large, hard-stamped size markings for quick identification.

Налаштування та підготовка

The GEARWRENCH combination wrench is ready for immediate use upon receipt. No assembly is required.

Огляд перед використанням:

• Inspect the wrench for any signs of damage, such as cracks, bends, or excessive wear. Do not use a damaged tool.
• Ensure the wrench size (13mm) matches the fastener you intend to work with. Using an incorrect size can damage both the fastener and the tool.
• Clean any grease or debris from the wrench to ensure a secure grip.

Інструкція з експлуатації

This combination wrench is designed for tightening and loosening 13mm metric fasteners (nuts and bolts).

General Use Guidelines:

1. Виберіть правильний кінець:
   • Використовуйте відкритий кінець for quick engagement and disengagement of fasteners, especially when access is limited from the top. The Surface Drive Plus™ design helps prevent rounding.
   • Використовуйте 12-point box end for maximum grip and torque application, particularly when breaking loose stubborn fasteners or for final tightening. The 15-degree offset provides knuckle clearance.
2. Забезпечте правильну посадку: Always ensure the wrench is fully seated on the fastener. A loose fit can lead to slippage, fastener damage, and potential injury.
3. Apply Force Correctly:
   • Pull on the wrench rather than push, when possible, to reduce the risk of injury if the wrench slips.
   • Apply steady, even pressure. Avoid sudden jerking motions.
   • For stubborn fasteners, apply penetrating oil and allow it to work before attempting to loosen.
4. кредитне плече: The long pattern length provides increased leverage. Use this advantage for fasteners requiring higher torque, but always be mindful of over-tightening.
5. Безпека: Wear appropriate personal protective equipment (PPE), such as safety glasses, when using hand tools.

Figure 3: Wrench in use in an engine compartment

This image shows the GEARWRENCH 13mm combination wrench being used to access a fastener within a complex engine compartment. The long pattern design facilitates reaching fasteners in tight or recessed areas, demonstrating its practical application.

Figure 4: Close-up of wrench application

Ближче view of the wrench in operation, illustrating how the user grips the tool and applies force to a fastener. This highlights the ergonomic design and the clearance provided by the wrench's shape.

Технічне обслуговування

Proper maintenance ensures the longevity and optimal performance of your GEARWRENCH combination wrench.

• Прибирання: After each use, wipe the wrench clean with a cloth to remove dirt, grease, and grime. For stubborn residue, use a mild degreaser.
• Сушка: Ensure the wrench is completely dry before storage to prevent rust, especially in humid environments.
• Зберігання: Store the wrench in a dry, clean environment, away from corrosive chemicals. A tool roll, drawer, or toolbox is recommended to protect the finish and prevent damage.
• Огляд: Periodically inspect the wrench for any signs of wear, damage, or corrosion. Address any issues promptly.

Figure 5: Chrome Plating for Corrosion Resistance

This diagram illustrates the chrome plating process, emphasizing its role in providing corrosion resistance to the tool. Regular cleaning and proper storage help maintain this protective layer.

Усунення несправностей

Most issues with a combination wrench can be avoided by following proper usage and maintenance guidelines. However, if you encounter problems:

• Wrench Slipping:
  • Ensure the wrench size matches the fastener exactly.
  • Confirm the wrench is fully seated on the fastener.
  • Check for excessive wear on the wrench jaws or box end. A worn tool should be replaced.
• Fastener Rounding:
  • This often occurs due to using an oversized wrench, a worn wrench, or improper seating.
  • Always use the correct size wrench and ensure it is fully engaged.
  • The Surface Drive Plus™ feature on the open end is designed to minimize rounding; ensure you are utilizing it correctly.
• Tool Damage (Bending/Breaking):
  • Avoid using extension pipes (cheater bars) on wrenches, as this can apply excessive force beyond the tool's design limits and void the warranty.
  • Do not strike the wrench with a hammer or other tools unless it is specifically designed for striking applications (this wrench is not).
  • If the tool is damaged, discontinue use immediately and replace it.

Технічні характеристики

Інформація про гарантію

GEARWRENCH products are manufactured to high-quality standards and are backed by a limited lifetime warranty against defects in material and workmanship. For specific warranty terms and conditions, including limitations and exclusions, please refer to the official GEARWRENCH webсайт або зверніться безпосередньо до служби підтримки клієнтів. Зберігайте чек про покупку для гарантійних випадків.

Підтримка клієнтів

If you have any questions regarding the use, maintenance, or warranty of your GEARWRENCH 13mm 12 Point Long Pattern Combination Wrench, please contact GEARWRENCH customer support.

• Webсайт: Відвідайте чиновника GEARWRENCH Store для отримання інформації про продукт та ресурсів підтримки.
• Контактна інформація: Зверніться до упаковки або до офіційного webсайт для отримання найактуальнішої контактної інформації служби підтримки клієнтів.