вступ
This manual provides essential information for the proper use and maintenance of your Dynojet USB 9V Power Adapter. This adapter is specifically designed to supply power to the Dynojet Power Commander III unit, facilitating programming and tuning operations without the need for the Power Commander III to be installed on a motorcycle. It features a USB connection for interfacing with a computer.
Інформація про безпеку
- Always ensure the adapter and Power Commander III are disconnected from any power source before making or breaking connections.
- Use only a fresh 9V battery or a suitable alternative power source (e.g., 6 AA batteries in a holder providing 9V) to power the adapter. Depleted batteries may lead to unstable operation or data corruption during programming.
- Do not expose the adapter to moisture, extreme temperatures, or corrosive environments.
- Уникайте падіння або сильних ударів адаптера.
- Зберігати в недоступному для дітей місці.
Вміст упаковки
Переконайтеся, що ваш пакет містить такі елементи:
- 1 x Dynojet USB 9V Power Adapter
Налаштування
- Prepare Power Source: Obtain a fresh 9V battery. Alternatively, a battery holder for 6 AA batteries can be used to provide a more stable and longer-lasting 9V power source.
- Підключіть живлення: Attach the 9V battery clip from the adapter to your 9V battery or alternative power source.
- Connect to Power Commander III: Plug the appropriate connector from the adapter into the power input port of your Dynojet Power Commander III unit. Ensure a secure connection.
- Підключення до комп'ютера: Insert the USB connector of the adapter into an available USB port on your computer.
- Встановлення програмного забезпечення: Ensure you have the latest Dynojet Power Commander software installed on your computer. If not, download it from the official Dynojet webсайт.
Інструкція з експлуатації
Once the adapter is connected to the Power Commander III and your computer, you can proceed with programming:
- Запуск програмного забезпечення: Open the Dynojet Power Commander software on your computer.
- Розпізнавання пристрою: The software should automatically detect the connected Power Commander III unit. If not, verify all connections and ensure the 9V battery has sufficient charge.
- Load/Modify Maps: Use the software interface to load new fuel maps, modify existing settings, or perform other tuning adjustments as required.
- Термін служби батареї: Be aware that a standard 9V battery can drain quickly when powering the Power Commander III. It is recommended to work efficiently and have a fresh battery or alternative power source ready to avoid interruptions during critical operations.
- Відключити: After completing your programming, safely disconnect the Power Commander III from the software, then disconnect the USB cable from your computer, and finally remove the 9V battery.
Технічне обслуговування
- Прибирання: Wipe the adapter with a soft, dry cloth to remove dust or debris. Do not use liquid cleaners or solvents.
- Зберігання: Зберігайте адаптер у прохолодному, сухому місці, подалі від прямих сонячних променів та екстремальних температур.
- Видалення батареї: Always remove the 9V battery from the adapter when not in use for extended periods to prevent battery leakage and damage to the adapter.
Усунення несправностей
| проблема | Можлива причина | Рішення |
|---|---|---|
| Power Commander III does not power on. | Depleted 9V battery; loose connection; faulty adapter. | Replace with a fresh 9V battery; check all connections; test adapter with another Power Commander III if available. |
| Computer does not detect Power Commander III. | Loose USB connection; missing/outdated drivers; Power Commander III not powered. | Ensure USB cable is securely connected; install or update Dynojet drivers; verify Power Commander III is powered by a fresh 9V battery. |
| Programming errors or interruptions. | Low 9V battery power; unstable USB connection. | Use a fresh 9V battery or a 6xAA battery holder; ensure USB cable is not disturbed during programming. |
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Бренд | Dynojet |
| Номер моделі | 66116002-AZ2 |
| Номер деталі виробника | 66116002 |
| Тип роз'єму | USB |
| Вихідний випtage | 9 вольт |
| Wattage | 36 Вт |
| Вага товару | 7.2 унції (0.45 фунта) |
| Вхідний об'ємtage | 240 Volts (Note: This specification may refer to a generic adapter type or an alternative power input not typically used with the 9V battery setup for this specific product.) |
| Джерело живлення | Corded Electric (Note: While listed, the primary intended power source for the Power Commander III via this adapter is a 9V battery.) |
Гарантія та підтримка
Warranty information for the Dynojet USB 9V Power Adapter is not provided in this document. For detailed warranty terms, technical support, or service inquiries, please contact Dynojet Research directly through their official website or customer service channels. Please have your product model number (66116002-AZ2) and purchase information available when contacting support.
