Dorman M390336 Brake Master Cylinder Installation and Maintenance Guide

1. Вступ

This manual provides detailed instructions for the proper installation, operation, and maintenance of the Dorman M390336 Brake Master Cylinder. This component is engineered to precisely match the design, function, and performance of the original master cylinder in specific Ford and Lincoln vehicle models. Constructed from new, high-quality materials, it ensures a safe and durable replacement for your vehicle's braking system.

Key features of the Dorman M390336 include:

• Precise Replacement: Cylinder housing matches the original part's casting material for similar performance.
• Міцний дизайн: All rubber components are made from high-quality EPDM compound, resistant to glycol-based brake fluid.
• 100% New Construction: Made entirely of new materials, not remanufactured, ensuring the highest quality and safety standards.
• Strict Specifications: Manufactured to meet rigorous SAE International standards.

2. Інформація про безпеку

WARNING: Brake system work requires specialized knowledge and tools. If you are not confident in your ability to perform this installation safely, seek assistance from a qualified automotive technician.

• Завжди використовуйте відповідні засоби індивідуального захисту, включаючи захисні окуляри та рукавички, під час роботи з гальмівними системами автомобіля.
• Brake fluid is corrosive and can damage paint, plastics, and skin. Avoid contact and clean up spills immediately.
• Перед початком будь-яких робіт переконайтеся, що автомобіль надійно закріплений на домкратах на рівній поверхні. Ніколи не покладайтеся виключно на домкрат.
• Правильно утилізуйте стару гальмівну рідину та компоненти відповідно до місцевих правил.
• Do not reuse old brake fluid. Always use new, clean brake fluid from a sealed container.

3. Вміст упаковки

Перед початком встановлення переконайтеся, що всі компоненти є в наявності та не пошкоджені:

• 1x Dorman M390336 Brake Master Cylinder

4. Сумісність з транспортними засобами

This Dorman M390336 Brake Master Cylinder is compatible with the following vehicles. Always confirm fitment by checking your vehicle's make, model, and trim level.

• Ford Expedition: 1997, 1998, 1999
• Ford F-150 Heritagе: 2004
• Ford F-150: 1999, 2000, 2001, 2002, 2003
• Ford F-250 HD: 1997
• Ford F-250: 1996, 1997, 1998, 1999
• Ford F-350: 1996, 1997
• Ford Lobo: 2001, 2002, 2003, 2004
• Lincoln Navigator: 1998, 1999

5. Налаштування та встановлення

5.1. Необхідні інструменти

• Набір торцевих/гайкових ключів
• Brake Line Wrenches
• Зливний піддон
• New DOT-approved Brake Fluid
• Bench Bleeder Kit (recommended)
• Bleeder Bottle or Vacuum Bleeder
• Магазин Рагс
• Захисні окуляри та рукавички

5.2. Підготовка

1. Припаркуйте автомобіль на рівній поверхні та увімкніть стоянкове гальмо.
2. Від'єднайте мінусову клему акумулятора.
3. Place a drain pan under the master cylinder to catch any spilled brake fluid.
4. Clean the area around the master cylinder to prevent contaminants from entering the brake system.

5.3. Зняття старого головного циліндра

1. Carefully disconnect the brake lines from the master cylinder using brake line wrenches. Be prepared for fluid to leak.
2. Remove the mounting nuts that secure the master cylinder to the brake booster.
3. Gently pull the old master cylinder away from the booster and remove it from the vehicle.

5.4. Bench Bleeding the New Master Cylinder

Bench bleeding is a critical step to remove air from the master cylinder before installation, preventing a spongy brake pedal.

This image displays the Dorman M390336 Brake Master Cylinder from a top-down perspective, highlighting the fluid reservoir and the black filler cap. The cap includes a warning about using only clean brake fluid from a sealed container.

1. Mount the new master cylinder securely in a vise or use a bench bleeding kit.
2. Install the plastic fittings and hoses from the bench bleeding kit into the master cylinder's outlet ports, routing the hoses back into the reservoir.
3. Fill the reservoir with new, clean DOT-approved brake fluid.
4. Slowly push the master cylinder piston in (using a pushrod or screwdriver) and release it. Repeat this process until no air bubbles are visible in the fluid returning through the hoses.
5. Maintain the fluid level in the reservoir throughout the process.

5.5. Installation onto Vehicle

Сторона view of the Dorman M390336 Brake Master Cylinder, illustrating its mounting flange and the hydraulic line connection ports. This view is helpful for understanding how the unit connects to the vehicle's brake lines.

1. Carefully position the bench-bled master cylinder onto the brake booster studs.
2. Install and tighten the mounting nuts to the manufacturer's specified torque.
3. Reconnect the brake lines to the master cylinder ports. Ensure they are threaded correctly and tightened securely with brake line wrenches to prevent leaks.
4. If your vehicle has a brake fluid level sensor, transfer it from the old reservoir to the new one if the connectors do not match. Ensure a secure fit.

5.6. System Bleeding

After installing the master cylinder, the entire brake system must be bled to remove any remaining air. This typically requires two people.

1. Start with the wheel furthest from the master cylinder (typically the passenger rear).
2. Have a helper pump the brake pedal several times and then hold it down firmly.
3. While the pedal is held down, open the bleeder screw on the caliper/wheel cylinder. Fluid and air will escape. Close the bleeder screw before the pedal reaches the floor.
4. Repeat this process until no air bubbles are visible in the fluid coming from the bleeder screw.
5. Move to the next furthest wheel and repeat the process until all four wheels have been bled.
6. Continuously monitor and refill the master cylinder reservoir with new brake fluid to prevent it from running dry during bleeding.

6. Інструкція з експлуатації

After installation and bleeding, perform the following checks:

• Рівень рідини: Ensure the brake fluid level in the master cylinder reservoir is at the MAX line.
• Відчуття педалі: The brake pedal should feel firm and consistent. If it feels spongy or goes to the floor, re-bleed the system.
• Перевірка герметичності: Visually inspect all brake line connections at the master cylinder and calipers/wheel cylinders for any signs of leaks.
• Тест-драйв: Perform a cautious test drive in a safe area at low speeds to confirm proper braking function before normal vehicle operation.

7. Технічне обслуговування

Regular maintenance of your brake system is crucial for safety and longevity.

• Рівень гальмівної рідини: Check the brake fluid level in the master cylinder reservoir regularly (e.g., during oil changes). Top off with DOT-approved fluid if necessary. A consistently low fluid level may indicate a leak or worn brake pads.
• Стан рідини: Brake fluid can absorb moisture over time, reducing its effectiveness. Consult your vehicle's service manual for recommended brake fluid flush intervals (typically every 2-3 years).
• Перевірка витоку: Periodically inspect the master cylinder, brake lines, calipers, and wheel cylinders for any signs of fluid leaks.

8. Вирішення проблем

8.1. Spongy Brake Pedal

• Причина: Air trapped in the brake system.
• рішення: Re-bleed the entire brake system, starting with the master cylinder (bench bleed if possible) and then each wheel in the correct sequence. Ensure the master cylinder reservoir does not run dry during bleeding.

8.2. Brake Fluid Leaks

• Причина: Loose brake line connections, damaged seals, or a faulty component.
• рішення: Inspect all connections for tightness. If leaks persist, check for damaged brake lines or a defective master cylinder.

8.3. Poor Braking Performance

• Причина: Air in the system, low brake fluid, or other issues within the brake system (e.g., worn pads, faulty calipers).
• рішення: Verify fluid level, bleed the system thoroughly. If the problem persists, inspect other brake components.

8.4. Brake Fluid Level Sensor Issues

• Причина: Incompatible sensor connector or faulty sensor.
• рішення: If the new master cylinder's reservoir sensor connector does not match your vehicle's harness, carefully transfer the original sensor from your old master cylinder reservoir to the new one. Ensure it is properly seated and sealed.

9. Технічні характеристики

10. Гарантія та підтримка

Dorman products are designed and manufactured to high-quality standards. For specific warranty information regarding your Dorman M390336 Brake Master Cylinder, please refer to the documentation included with your purchase or visit the official Dorman webсайт.

For technical support, product inquiries, or further assistance, please visit the Магазин Dorman на Amazon or the official Dorman Products webсайт.