Winco Stainless Steel Juice Dispenser (Model 902) Instruction Manual

1. Вступ

Thank you for choosing the Winco Stainless Steel Juice Dispenser, Model 902. This dispenser is designed for serving various beverages such as lemonade, orange juice, and iced tea in commercial or event settings. Its durable stainless steel construction and clear polycarbonate container ensure both longevity and an attractive presentation. This manual provides essential information for the safe and efficient use, assembly, cleaning, and maintenance of your dispenser.

Ключові характеристики:

• Capacity: Approximately 2.2 Gallons (8.3 Liters)
• Material: Stainless Steel body, clear polycarbonate juice container
• Integrated stainless steel ice chamber to keep beverages chilled without dilution
• Знімний піддон для крапель для легкого очищення

2. Інформація про безпеку

Будь ласка, прочитайте всі інструкції з техніки безпеки перед використанням пристрою, щоб запобігти травмам або пошкодженням.

• Always place the dispenser on a stable, level surface to prevent tipping.
• Do not fill the dispenser with hot liquids. This dispenser is designed for cold beverages only.
• Exercise caution when handling the dispenser, especially when full, due to its weight.
• Зберігати в недоступному для дітей місці.
• Do not use abrasive cleaners or scouring pads, as they can scratch the stainless steel or polycarbonate surfaces.
• Цей продукт є не можна використовувати в посудомийній машині. Hand wash all components.

3. Список деталей

Перед складанням переконайтеся, що всі деталі є в наявності та не пошкоджені:

1. Основа з нержавіючої сталі
2. Знімний піддон для крапель
3. Clear Polycarbonate Juice Container (2.2 Gallon capacity)
4. Кришка з нержавіючої сталі
5. Stainless Steel Ice Chamber (removable)
6. Spigot/Faucet Assembly

малюнок 1: Winco Stainless Steel Juice Dispenser, Model 902. Shows the complete assembled unit including the base, clear container, lid, and spigot.

4. Налаштування та складання

Follow these steps to assemble your juice dispenser:

1. Розпакувати: Обережно вийміть усі компоненти з упаковки. За потреби збережіть упаковку для подальшого зберігання.
2. чистий: Before first use, wash all parts that will come into contact with beverages (juice container, lid, ice chamber, spigot) with warm, soapy water. Rinse thoroughly and dry completely.
3. Зібрати кран: Ensure the spigot is securely attached to the juice container. If it requires assembly, follow the instructions provided with the spigot. Ensure all washers and nuts are tightened to prevent leaks.
4. Місце піддону для крапель: Position the removable drip tray onto the stainless steel base.
5. Position Juice Container: Carefully place the clean polycarbonate juice container onto the stainless steel base, ensuring it sits securely above the drip tray.
6. Вставити крижану камеру: If using, fill the stainless steel ice chamber with ice cubes and insert it into the center of the juice container.
7. Додати напій: Pour your desired cold beverage into the polycarbonate container. Do not overfill.
8. Місце кришки: Securely place the stainless steel lid on top of the juice container.

5. Інструкція з експлуатації

Using your Winco Juice Dispenser is straightforward:

1. Ensure the dispenser is fully assembled and filled with your cold beverage.
2. To dispense, push the spigot lever down. The beverage will flow out.
3. To stop dispensing, release the spigot lever.
4. Monitor the ice chamber and refill with ice as needed to maintain beverage temperature.
5. Regularly check the drip tray and empty it when full to prevent overflow.

6. Технічне обслуговування та очищення

Proper cleaning and maintenance will extend the life of your dispenser.

Щоденне прибирання:

1. Порожній: After each use, empty any remaining beverage from the container.
2. Розбирати: Remove the lid, ice chamber, and juice container from the base. Detach the spigot from the container. Empty the drip tray.
3. мити: Hand wash all components (juice container, lid, ice chamber, spigot, drip tray) with warm water and a mild, non-abrasive dish soap. Use a soft cloth or sponge. For the spigot, ensure thorough cleaning to prevent residue buildup.
4. Полоскання: Ретельно промийте всі деталі чистою водою, щоб видалити всі залишки мила.
5. Сухий: Dry all components completely with a soft, clean cloth to prevent water spots and rust on stainless steel parts. Allow the polycarbonate container to air dry fully before reassembly or storage.
6. Чиста основа: Wipe down the stainless steel base with a damp тканиною та негайно висушіть.

Зберігання:

Store the disassembled, clean, and dry dispenser in a cool, dry place. Avoid stacking heavy items on the polycarbonate container to prevent damage.

7. Вирішення проблем

Ось рішення поширених проблем, з якими ви можете зіткнутися:

• Leakage from Spigot:
  рішення: Ensure the spigot is properly installed and tightened. Check that all rubber washers are correctly seated and not damaged. If the spigot is old or damaged, it may need replacement.
• Повільне дозування:
  рішення: Check if the beverage contains pulp or fruit pieces that might be clogging the spigot. Clean the spigot thoroughly. Ensure the ice chamber is not obstructing the flow.
• Beverage Not Staying Cold:
  рішення: Ensure the ice chamber is filled with sufficient ice. Replace melted ice regularly. The dispenser is designed for temporary chilling, not long-term refrigeration.
• Cloudy Polycarbonate Container:
  рішення: This can occur from using abrasive cleaners or hard water. Use only mild soap and soft cloths for cleaning. For hard water stains, a solution of white vinegar and water can help, followed by thorough rinsing.

8. Технічні характеристики

9. Гарантія та підтримка

For warranty information or technical support regarding your Winco Stainless Steel Juice Dispenser, Model 902, please refer to the documentation included with your purchase or contact Winco customer service directly. Contact details can typically be found on the manufacturer's official webсайті або на чеку про покупку.