1. Вступ
Thank you for choosing Moen. This manual provides detailed instructions for the installation, operation, and maintenance of your Moen T2701BN Level Posi-Temp Valve Trim Kit. This trim kit is designed to complement the modern aesthetic of your bathroom while providing reliable temperature and flow control. Please read these instructions carefully before beginning installation to ensure proper function and to avoid damage.
2. Інформація про безпеку
- Завжди вимикайте головне водопостачання перед початком будь-яких сантехнічних робіт.
- Під час встановлення використовуйте відповідні засоби індивідуального захисту, такі як захисні окуляри.
- Якщо ви не впевнені щодо будь-якого етапу процесу встановлення, зверніться до кваліфікованого сантехніка.
- Переконайтеся, що всі з'єднання надійно закріплені, щоб запобігти протіканню.
- This trim kit requires a compatible Moen Posi-Temp pressure-balancing valve (не включені). Ensure you have the correct valve body installed (e.g., 2510, 2590, 2570, or 2520 series).
3. Вміст упаковки
Перед встановленням перевірте наявність усіх компонентів:
- Важільна ручка
- Escutcheon Plate (Wall Plate)
- Handle Adapter/Mechanism
- Кріпильні елементи (гвинти, прокладки)
- Посібник із встановлення (цей документ)
Примітка: The Posi-Temp pressure-balancing valve body is sold separately and is not included with this trim kit.

This image displays the Moen T2701BN Level Posi-Temp Valve Trim Kit, featuring its single lever handle and escutcheon plate in a brushed nickel finish. The design is modern and sleek, intended for shower or tub installations.
4. Необхідні інструменти
- Розвідний ключ
- Викрутка для головки Phillips
- Hex Wrench (size may vary, typically 7/64 inch or 3/32 inch, refer to specific valve instructions)
- Plumber's Putty or Silicone Sealant (optional, for escutcheon plate)
- Тканина для чищення
5. Інструкції зі встановлення
These instructions assume a compatible Moen Posi-Temp valve body is already installed in the wall. Refer to the valve body's specific installation manual for rough-in details.
- Підготуйте клапан: Ensure the water supply to the valve is turned off. Remove any existing trim components.
- Install the Escutcheon Plate: Position the escutcheon plate over the valve body opening. Ensure the plate is level. Secure it to the wall using the provided screws. Do not overtighten. For a watertight seal, a thin bead of silicone sealant can be applied around the perimeter of the plate before securing.
- Install the Handle Adapter: Slide the handle adapter onto the valve stem. Ensure it is properly seated.
- Прикріпіть ручку: Place the lever handle onto the handle adapter. Secure the handle to the adapter using the small set screw, typically located on the underside of the handle. Use the appropriate hex wrench.
- Перевірка на герметичність та функціональність: Turn the main water supply back on. Slowly open the valve by moving the handle. Check for any leaks around the escutcheon plate and handle. Verify that the handle rotates smoothly to control temperature and flow.
6. Інструкція з експлуатації
The Moen T2701BN Level Posi-Temp Valve Trim Kit features a single lever handle for controlling both water temperature and flow.
- Увімкнути/вимкнути: Rotate the handle away from the wall to turn on the water. Rotate it back towards the wall to turn off the water.
- Налаштувати температуру: Rotate the handle counter-clockwise for warmer water and clockwise for cooler water. The Posi-Temp valve maintains consistent water temperature even with pressure fluctuations in the water supply.
- Налаштуйте потік: The flow rate is controlled by how far the handle is rotated away from the wall.
7. Технічне обслуговування
To maintain the beautiful finish of your Moen T2701BN trim kit, follow these cleaning guidelines:
- Очистіть м'якою, damp тканина.
- Use only mild soap and water.
- Avoid abrasive cleaners, harsh chemicals, or polishes, as these can damage the brushed nickel finish and void the warranty.
- Regular cleaning will help prevent water spots and mineral buildup.
8. Вирішення проблем
| проблема | Можлива причина | Рішення |
|---|---|---|
| Water leaks from handle or escutcheon. | Loose connections, damaged O-rings/gaskets, improper installation. | Ensure all screws are tightened. Check for proper seating of gaskets. If leaks persist, the valve cartridge may need inspection or replacement (refer to valve body manual). |
| No water or low water flow. | Main water supply off, debris in valve, clogged aerator (if applicable to showerhead/spout). | Check main water supply. Consult valve body manual for cartridge inspection. |
| Temperature difficult to adjust or inconsistent. | Valve cartridge issue, temperature limit stop setting. | Refer to the Posi-Temp valve body manual for instructions on adjusting the temperature limit stop or inspecting the cartridge. |
9. Технічні характеристики
- Номер моделі: T2701BN
- Бренд: Моен
- Завершення: Матовий нікель
- матеріал: Brass (handle), Nickel (finish)
- Кількість ручок: 1
- Тип монтажу: Настінне кріплення
- Compatible Valve: Moen Posi-Temp Pressure-Balancing Valve (sold separately)
- Вага товару: Приблизно 1.3 фунтів
10. Інформація про гарантію
Moen products are manufactured under the highest standards of quality and workmanship. Moen offers a limited lifetime warranty to the original consumer purchaser against leaks, drips, and finish defects for as long as the original consumer purchaser owns their home. Other components are warranted for a period of one year from the date of purchase. For complete warranty details, please visit the official Moen website or contact Moen customer service.
11. Підтримка та контакти
If you require further assistance or have questions regarding your Moen T2701BN Level Posi-Temp Valve Trim Kit, please contact Moen customer support:
- Webсайт: www.moen.com
- телефон: Зверніться до Моена webсайт регіональних контактних телефонів.
Please have your model number (T2701BN) and date of purchase available when contacting support.





