1. Продукт закінчивсяview
The Chicago Pneumatic CP7200 Mini Random Orbital Sander is a compact and lightweight pneumatic tool designed for various finishing applications, from heavy material removal to fine finishing. It is particularly effective for small or tight areas where larger sanders may not fit. This tool features an adjustable power regulator, a two-finger progressive throttle for precise control, and a comfortable rubber molded pistol grip. Its silenced handle exhaust directs air away from the work area, contributing to lower noise and vibration levels.
Ключові характеристики:
- Compact and lightweight design for easy access in tight areas.
- Rubber molded palm grip for enhanced comfort during operation.
- Adjustable speed regulator to match the tool's speed to the specific job requirements.
- Two-finger progressive throttle for precise control and reduced operator fatigue.
- Silenced handle exhaust system to direct air away from the work area and minimize noise.
Image: The Chicago Pneumatic CP7200 Air Random Rotary Sander Tool, showcasing its compact design and pistol grip.
2. Налаштування
Attaching Backing Pads:
The CP7200 sander comes with both 2-inch and 3-inch backing pads, which are easy to interchange. To change a backing pad:
- Insert the provided locking pin into the designated hole near the spindle to secure the pad.
- Unscrew the current backing pad from the spindle.
- Screw on the desired 2-inch or 3-inch backing pad until it is securely fastened.
- Remove the locking pin before operation.
Зображення: Збоку view of the CP7200 sander, illustrating the attachment point for backing pads.
3. Інструкція з експлуатації
Connecting to Air Supply:
Ensure the sander is connected to a clean, dry air supply via the 1/4-inch NPT air inlet. A minimum hose size of 3/8 inch is recommended for optimal performance. It is advisable to use an in-line moisture filter to prevent damage to the tool.
Контроль швидкості:
The CP7200 features both a progressive throttle and a speed control dial. The progressive throttle allows for immediate speed adjustment by varying pressure on the trigger. For more consistent speed settings, use the speed control dial located on the back of the sander to set the maximum RPM.
Sanding Techniques:
Apply firm, even pressure to the work surface. The random orbital action helps prevent swirl marks and ensures a smooth finish. For best results, move the sander in overlapping passes. The compact size is ideal for reaching small or intricate areas.
Video: Demonstration of the Chicago Pneumatic CP7200 Mini Sander in use, highlighting its compact size and effectiveness for small area repairs.
4. Технічне обслуговування
Regular maintenance is crucial for the longevity and optimal performance of your CP7200 sander.
- Змащення: Oil the tool daily as per the manufacturer's instructions to ensure smooth operation of internal components.
- Управління вологістю: Always use an in-line moisture filter to prevent water from entering the tool, which can cause corrosion and damage.
- Прибирання: Keep the tool clean and free from dust and debris. Periodically wipe down the exterior.
- Огляд: Regularly inspect the backing pads for wear and tear. Replace them when necessary to maintain sanding efficiency.
5. Вирішення проблем
If you encounter issues with your CP7200 sander, consider the following common solutions:
- Insufficient Speed/Power: Ensure your air compressor can provide sufficient CFM (Cubic Feet per Minute) and pressure. Check for kinks or leaks in the air hose. Verify the speed control dial is set appropriately. If the built-in speed adjustment does not provide low enough speeds for specific tasks, an external air regulator may be needed.
- Надмірна вібрація/шум: Check if the backing pad is securely attached and not damaged. Ensure the tool is properly lubricated.
- Погана продуктивність шліфування: Replace worn-out sanding discs. Ensure the correct grit is being used for the application. Verify the backing pad is not damaged.
6. Технічні характеристики
| Особливість | Деталь |
|---|---|
| Номер моделі | CP7200 |
| Вага товару | 1.5 фунта |
| Air Consumption (CFM) | 21 |
| Швидкість (RPM) | 15000 |
| Діаметр колодки | 2 and 3 Inch (75 mm) |
| Air Inlet Size (in. NPT) | 1/4 |
| Min. Hose Size (in.) | 3/8 |
| Рівень звуку | 97.2 дБ |
| Джерело живлення | Пневматичний |
| Країна походження | Тайвань |
7. Гарантія та підтримка
Інформація про гарантію:
The Chicago Pneumatic CP7200 Air Random Rotary Sander Tool comes with a 1 роки обмеженої гарантіїБудь ласка, збережіть чек про покупку для гарантійного обслуговування.
Підтримка клієнтів:
For further assistance, technical support, or to inquire about replacement parts, please visit the official Chicago Pneumatic website or contact their customer service department. You can also refer to the official user manual available as a PDF document for more detailed information.
Офіційний посібник користувача (PDF): Завантажте тут
Chicago Pneumatic Store: Відвідати магазин
