1. Вступ
This manual provides essential instructions for the safe and effective operation and maintenance of your Slime COMP Tire Inflator with Raft Pump and Light. This 12-volt, 150 PSI compressor is designed for inflating vehicle tires and various inflatables, featuring a built-in pressure gauge, light, and emergency light for convenience.
2. Інформація про безпеку
- Завжди читайте та розумійте всі інструкції перед використанням пристрою.
- Ensure the vehicle engine is running when using the inflator to prevent draining the vehicle battery.
- Не залишайте нагнітач без нагляду під час роботи.
- Avoid operating the inflator for more than 10-15 minutes continuously to prevent overheating. Allow it to cool down for at least 15 minutes between uses.
- Тримайте дітей та домашніх тварин подалі від нагнітача під час використання.
- Не піддавайте нагнітач впливу дощу або вологи.
- Always check the tire pressure with a reliable gauge after inflation.
- Wear eye protection when operating the inflator.
3. Вміст упаковки
Перевірте наявність усіх предметів у вашій упаковці:
- Slime COMP Tire Inflator Unit
- Raft Pump with 3-foot hose
- Adapters for inflatables (e.g., ball needle, plastic nozzle)
- Шнур живлення 12 вольт
4. Продукт закінчивсяview
Familiarize yourself with the components of your Slime COMP Tire Inflator:
Зображення: спереду view of the Slime COMP Tire Inflator, showing the pressure gauge, power switches, light, and connection ports.
- Манометр: Displays current pressure.
- Compressor ON/OFF Switch: Activates the tire inflator.
- Light ON/OFF Switch: Controls the built-in light and emergency light.
- Вбудоване світло: Забезпечує освітлення.
- Аварійне світло: Flashing red light for roadside visibility.
- 12-Volt Power Cord: Connects to your vehicle's 12V outlet.
- Tire Inflator Hose: Connects to tire valve stems.
- Raft Pump Port: For connecting the raft pump hose.
- Відсік для зберігання аксесуарів: Stores adapters and power cord.
5. Налаштування
- Ensure your vehicle is parked safely and the engine is running.
- Retrieve the 12-volt power cord from the storage compartment.
- Insert the 12-volt power plug firmly into your vehicle's 12-volt accessory outlet.
- For tire inflation, uncoil the tire inflator hose. For inflatables, connect the raft pump hose to the designated port and select the appropriate adapter.
6. Інструкція з експлуатації
6.1. Inflating Vehicle Tires
- Зніміть ковпачок вентиля з шини.
- Screw the inflator hose connector onto the tire valve stem until it is secure and no air is escaping.
- Check the current tire pressure reading on the built-in gauge.
- Flip the compressor ON/OFF switch to the 'ON' position to begin inflation.
- Monitor the pressure gauge. When the desired pressure is reached, flip the compressor ON/OFF switch to the 'OFF' position. Inflation of a mid-sized car tire typically takes approximately 8 minutes.
- Unscrew the inflator hose connector from the tire valve stem and replace the valve cap.
6.2. Inflating Inflatables (Rafts, Balls, etc.)
- Select the appropriate adapter for your inflatable item.
- Attach the adapter to the raft pump hose.
- Insert the adapter into the inflatable item's valve.
- Flip the compressor ON/OFF switch to the 'ON' position to begin inflation.
- Monitor the inflation process. Do not overinflate.
- Once inflated, turn the compressor 'OFF' and remove the adapter.
6.3. Using the Built-in Light and Emergency Light
- To activate the built-in light, flip the Light ON/OFF switch to the 'ON' position.
- To activate the emergency (flashing red) light, flip the Light ON/OFF switch to the 'ON' position and then to the 'OFF' position quickly, or as indicated by the specific model's switch mechanism. Refer to the unit's markings for exact operation.
- Turn the switch to 'OFF' when the light is no longer needed.
7. Технічне обслуговування
- After each use, ensure the unit is clean and free of dirt or debris.
- Store the power cord and adapters neatly in the designated storage compartment.
- Зберігайте нагнітач у прохолодному, сухому місці, подалі від прямих сонячних променів та екстремальних температур.
- Не намагайтеся розбирати або ремонтувати пристрій самостійно. Зверніться до служби підтримки клієнтів для отримання допомоги.
8. Вирішення проблем
| проблема | Можлива причина | Рішення |
|---|---|---|
| Інфлятор не вмикається. | 12V power plug not fully inserted. Vehicle 12V outlet fuse blown. Inflator internal fuse blown. Vehicle engine not running. | Ensure plug is secure. Check vehicle fuse. Contact customer support if internal fuse is suspected. Start vehicle engine. |
| Slow inflation or low pressure. | Hose connection not secure. Unit overheating. | Tighten hose connection to valve stem. Allow unit to cool down for 15 minutes. |
| Неточні показники тиску. | Gauge malfunction. | Verify pressure with a separate, known accurate gauge. Contact customer support if discrepancy persists. |
9. Технічні характеристики
- модель: КОМП05
- томtage: 12 вольта постійного струму
- Максимальний тиск: 150 PSI
- Вага товару: Приблизно 3.09 фунта
- Розміри продукту: 7.25 x 5 x 10.5 дюймів
- Inflation Time (Mid-sized tire): Приблизно 8 хвилин
10. Гарантія та підтримка
For warranty information or technical support, please refer to the warranty card included with your product or visit the official Slime website. You may also contact Slime customer service directly for assistance with product operation, troubleshooting, or parts replacement.
Інтернет-підтримка: www.slime.com
