Kichler Structures 3-Light Halogen Vanity Light (Model 6463NI) Instruction Manual

1. Продукт закінчивсяview

The Kichler Structures 3-Light Halogen Vanity Light, model 6463NI, is a contemporary lighting fixture designed for bathroom and powder room installations. It features a brushed nickel finish and satin etched glass shades, providing an ambient glow. This fixture is UL/CSA/ETL certified for damp location use in the USA and Canada.

The vanity light measures approximately 9 inches high, 30 inches wide, with an extension of 10.5 inches from the wall. It is designed to use three mini-can base T-3 or T-4 halogen bulbs, up to 100W each, which are typically included.

Фронт view of the Kichler Structures 3-Light Halogen Vanity Light in brushed nickel with satin etched glass shades.

2. Інформація про безпеку

УВАГА: Always turn off the electrical current at the main circuit breaker before beginning installation or performing any maintenance. Failure to do so may result in electrical shock, serious injury, or death.

This product is intended for installation in accordance with the National Electrical Code (NEC) and all local code specifications. If you are unsure about wiring or installation, consult a qualified electrician.

Пропозиція 65 Попередження: Цей продукт може містити хімічні речовини, які, як відомо штату Каліфорнія, викликають рак, вроджені вади розвитку або інші репродуктивні порушення. Будь ласка, ознайомтеся з місцевим законодавством перед покупкою.asinцей продукт.

Не перевищуйте максимальну потужністьtage specified for the bulbs (100W per bulb). Halogen bulbs can become very hot; allow them to cool before handling.

3. Що в коробці

Carefully unpack all components and inspect for any damage. Keep all packaging materials until you are satisfied with the product. The package typically includes:

• Монтажний ремінь
• Гвинти кріплення стрічки
• Зчеплення
• Шайби блокування
• Соска
• гвинти
• Ручки блокування
• Дріт заземлення
• Ball Bracket
• Аллен Гайковер
• Hold Screws
• Навіс (1)
• Thread Compound
• Halogen bulbs (3 x 100W equivalent)
• Інструкція з експлуатації

Example of components included with the Kichler Structures vanity light. Actual contents may vary slightly.

4. Інструкції зі встановлення

This fixture is designed for semi-flush mount installation. Professional installation by a licensed electrician is recommended to ensure safety and compliance with local electrical codes.

4.1. Підготовка

1. Вимкніть живлення на автоматичному вимикачі.
2. Remove the old fixture (if applicable).
3. Переконайтеся, що поверхня для монтажу чиста, суха та має міцну конструкцію.
4. Identify the supply wires (black for hot, white for neutral, green or bare copper for ground).

4.2. Монтаж світильника

1. Attach the mounting strap to the electrical junction box using the provided strap mounting screws.
2. Connect the fixture's ground wire to the house ground wire using a wire nut.
3. Connect the fixture's white wire to the house white (neutral) wire.
4. Connect the fixture's black wire to the house black (hot) wire.
5. Акуратно засуньте всі дроти в розподільну коробку.
6. Secure the fixture canopy to the mounting strap using the lockup knobs or screws.

4.3. Installing the Glass Shades and Bulbs

1. Insert the specified halogen bulbs (T-3 or T-4, mini-can base, up to 100W) into the sockets.
2. Carefully attach the satin etched glass shades to the fixture. Ensure they are securely fastened according to the specific design of your model.

The Kichler Structures vanity light installed in a modern bathroom setting.

5. Інструкція з експлуатації

Once installed, the Kichler Structures vanity light operates like any standard wall-mounted light fixture. Use your existing wall switch to turn the light on and off. This fixture is compatible with dimmer switches, allowing you to adjust the light output. Ensure any dimmer switch used is rated for halogen lighting and the total wattagе цибулин.

The fixture uses three 100W halogen bulbs (equivalent). These bulbs provide bright illumination suitable for vanity areas. Be aware that halogen bulbs generate heat during operation.

6. Технічне обслуговування

Регулярне чищення допоможе підтримувати зовнішній вигляд та продуктивність вашої лампи для туалетного столика Kichler.

6.1. Інструкції з очищення

1. Always turn off the electric current at the main circuit breaker before cleaning.
2. Allow the fixture and bulbs to cool completely before touching.
3. Clean metal components with a soft cloth moistened with a mild liquid soap solution.
4. Wipe clean and buff with a very soft, dry cloth to prevent water spots and maintain the finish.
5. For glass shades, use a soft, damp cloth. Avoid abrasive cleaners that could scratch or damage the finish.

6.2. Заміна лампи

When replacing bulbs, ensure the power is off and the bulbs are cool. Use only mini-can base T-3 or T-4 halogen bulbs, not exceeding 100W per bulb. Refer to the original bulb specifications for exact replacements.

7. Вирішення проблем

If your Kichler Structures vanity light is not functioning correctly, consider the following common issues:

• Світло не вмикається:
  • Перевірте, чи спрацював автоматичний вимикач.
  • Переконайтеся, що настінний вимикач знаходиться в положенні «УВІМК.».
  • Переконайтеся, що лампочки надійно вкручені в патрон і не перегоріли.
  • Перевірте з'єднання проводів на наявність ослаблення кріплення (при вимкненому живленні).
• Мерехтіння вогнів:
  • Переконайтеся, що лампочки повністю затягнуті.
  • If using a dimmer, ensure it is compatible with halogen bulbs and rated for the total wattage.
  • Перевірте наявність нещільних з'єднань проводів (при вимкненому живленні).
• Лампочки швидко перегорають:
  • Ensure you are using the correct bulb type and wattage (max 100W halogen).
  • Avoid touching halogen bulbs directly with bare hands during installation, as oils can cause premature failure.
  • томtage fluctuations in your home's electrical system can also affect bulb life.

Якщо ці кроки не вирішать проблему, зверніться до служби підтримки клієнтів Kichler або до кваліфікованого електрика.

8. Технічні характеристики

9. Інформація про гарантію

Kichler warrants that the products it provides will be free from defects in material and workmanship for один (1) рік following the date of shipment from the seller. If any warranted products are found by Kichler to be defective, such products will, at Kichler's sole option and cost, be replaced, repaired, or refunded less an amount directly attributable to the consumer's prior use of the product.

This warranty is not transferable. It does not cover labor or other costs or expenses to remove or install any defective, repaired, or replaced product. Goods not manufactured by Kichler are warranted only by their respective manufacturers, if any.

The warranty does not apply to products subjected to misuse, mishandling, misapplication, connected voltage more than 5% above standard North American voltage, neglect (including improper maintenance), accident, improper installation, improper packaging of returned products, modification (including unauthorized parts or attachments), or adjustment or repair by unauthorized personnel.

For warranty claims, the buyer will send allegedly defective parts or products to the plant designated by Kichler with proof of purchase, buyer's name, return address, and a description of the claimed product defect.

10. Підтримка клієнтів

For further assistance, technical support, or inquiries regarding your Kichler Structures vanity light, please visit the official Kichler website or contact their customer service department. Always have your model number (6463NI) and proof of purchase available when contacting support.

Відвідайте магазин Kichler на Amazon

About Kichler Lighting

Since 1938, Kichler Lighting has been a provider of distinctive lighting solutions. They offer a variety of styles, finishes, and quality products designed to complement various aesthetic environments, from casual to contemporary, transitional, or traditional.