Посібники+

Leviton S08-CS120-02W

Leviton S08-CS120-02W Commercial Grade AC Quiet Toggle Switch User Manual

Model: S08-CS120-02W

Важлива інформація з безпеки

УВАГА: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. This device must be installed in accordance with all national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.

Продукт закінченийview

The Leviton S08-CS120-02W is a commercial-grade, single-pole AC quiet toggle switch designed for reliable ON-OFF control of lighting or other electrical loads. Its quiet operation makes it suitable for various residential and commercial applications. This switch features a grounding screw for enhanced safety and is UL listed, ensuring compliance with safety standards.

Leviton S08-CS120-02W Commercial Grade AC Quiet Toggle Switch

зображення: Фронт view of the Leviton S08-CS120-02W Commercial Grade AC Quiet Toggle Switch. The image displays a white toggle switch with a standard rectangular faceplate, suitable for wall mounting. The toggle lever is visible in the center, designed for simple up/down operation.

Вміст упаковки

Перед початком встановлення перевірте наявність усіх компонентів:

Інструкції з монтажу

Необхідні інструменти:

Wiring (Single-Pole Switch):

  1. Вимкніть живлення: Locate the circuit breaker or fuse that controls the switch location and turn it OFF. Verify power is off using a voltagтестер.
  2. Зняти старий вимикач: Carefully remove the existing wall plate and switch from the electrical box. Disconnect the wires from the old switch, noting their connections.
  3. Підключіть дроти: This single-pole switch has three screw terminals: two for the hot (line/load) wires and one for the ground wire.
    • Connect the incoming hot wire (from the power source) to one of the brass screw terminals.
    • Connect the outgoing hot wire (to the light fixture or load) to the other brass screw terminal.
    • Connect the bare copper or green insulated ground wire from the electrical box to the green grounding screw terminal on the switch.

    Ensure all wire connections are tight and secure. Use wire nuts if necessary for any splices. The switch is designed for screw terminals.

  4. Монтаж: Carefully fold the wires into the electrical box. Secure the switch to the electrical box using the provided mounting screws. Ensure the switch is oriented correctly.
  5. Встановити настінну пластину: Прикріпіть декоративну настінну пластину над вимикачем.
  6. Відновлення живлення: Turn the power back ON at the circuit breaker or fuse box. Test the switch to ensure proper operation.

Операція

The Leviton S08-CS120-02W is a simple ON-OFF toggle switch. To operate, simply push the toggle lever up to turn the connected device (e.g., light) ON, and push the toggle lever down to turn it OFF. The switch is designed for quiet operation, minimizing audible clicking sounds during use.

Догляд та обслуговування

Усунення несправностей

проблемаМожлива причинаРішення
Switch does not turn ON/OFF device.No power to the switch; Loose wiring; Faulty device.Check circuit breaker/fuse. Verify all wire connections are secure. Test the connected device separately.
Перемикач гарячий на дотик.Overload; Loose connection.Immediately turn off power. Reduce load on the circuit. Check for loose wiring. Consult an electrician if the problem persists.
Flickering light or intermittent power.Loose wiring; Faulty bulb/device.Turn off power and check all wire connections. Replace bulb or test device.

Технічні характеристики

Гарантія та технічна підтримка

For warranty information or technical assistance, please contact Leviton customer support directly or visit their official webсайт. Зберігайте чек про покупку для гарантійних претензій.

Офіційний представник Левітона Webсайт: www.leviton.com