Продукт закінченийview
The DAP 2102 Phenoseal Vinyl Adhesive Caulk is a versatile, all-purpose adhesive caulk designed for sealing and bonding various surfaces. This almond-colored caulk comes in a 10 oz cartridge and is formulated for both indoor and outdoor applications. It is known for its fast-drying properties, paintability, and easy water cleanup. Phenoseal caulk effectively seals, bonds, and caulks, making it suitable for a wide range of home improvement and repair tasks.
Image: DAP 2102 Phenoseal Vinyl Adhesive Caulk, 10 oz, Almond.
Image: Key features of Phenoseal Vinyl Adhesive Caulk, emphasizing its ability to bond, caulk, and seal, along with being fast-drying and paintable.
Інформація про безпеку
УВАГА: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65). Always read and follow all warnings and instructions on the product label.
УВАГА: May cause eye and skin irritation. Vapor may be harmful if inhaled. Use in a well-ventilated area. Avoid contact with eyes and prolonged contact with skin. In case of contact, flush thoroughly with water. If irritation persists, seek medical attention. Keep out of reach of children.
Налаштування
Proper preparation is crucial for optimal performance and adhesion of the caulk.
- Підготовка поверхні: Ensure the surface where the caulk will be applied is clean, dry, and free of any old caulk, dirt, grease, oil, or foreign material. For best results, surfaces should be structurally sound.
- Nozzle Preparation: Cut the nozzle of the caulk cartridge at a 45-degree angle to achieve the desired bead size. A smaller cut will produce a finer bead, while a larger cut will produce a wider bead.
- Load Cartridge: Insert the prepared caulk cartridge into a standard caulk gun. Ensure it is securely seated.
Image: Visual guide for preparing and applying Phenoseal Vinyl Adhesive Caulk.
Інструкція з експлуатації
Follow these steps for effective application of the caulk:
- Apply Caulk: Apply a continuous, even bead of caulk into the joint or gap by pressing the caulk gun trigger and moving the gun steadily along the seam.
- Smooth Bead: Immediately after application, smooth the caulk bead with a wet finger, a caulk tool, or a damp sponge. This helps ensure good adhesion and a professional finish.
Ідеальні програми
Phenoseal Vinyl Adhesive Caulk is suitable for a variety of surfaces and applications, including:
- Субстрати: Wood, Vinyl, Metal, Brick, Concrete, Aluminum, Glass, Drywall, Plaster/Stucco, Mortar/Stone.
- Використання в приміщенні: Kitchens, bathrooms, windows, doors, baseboards, crown molding, backsplashes, countertops, sinks, tubs, showers, and loose tiles.
- Використання на вулиці: Eaves, soffits, siding, exterior doors, and windows.
Image: Multi-material adhesion capabilities of Phenoseal Vinyl Adhesive Caulk.
Image: Ideal indoor applications for Phenoseal Vinyl Adhesive Caulk.
Image: Ideal bathroom applications for Phenoseal Vinyl Adhesive Caulk.
Image: Ideal outdoor applications for Phenoseal Vinyl Adhesive Caulk.
Технічне обслуговування
Proper maintenance ensures the longevity of your caulk application and product storage.
- Cleanup of Uncured Caulk: Clean up excess uncured caulk immediately with a damp sponge or cloth before it skins over (typically within 15 minutes). This caulk is water clean-up friendly.
- Cleanup of Cured Caulk: Once cured, the caulk must be cut or scraped away for removal.
- Resealing and Storage: Reseal the cartridge nozzle after use to prevent the remaining caulk from drying out. Store the cartridge in a cool, dry place, away from extreme heat or cold, to maintain product integrity for future use.
Curing and Drying Times
- Час застосування: Approximately 10 minutes before skinning over.
- Paintability: Allow caulk to dry for at least 2 hours (longer in cool/humid conditions) before painting with latex or oil-based paints.
- Вплив води: Allow caulk to dry for at least 24 hours before exposing to water.
- Повне одужання: Functional cure is achieved in 48 hours. Note that full cure can vary from 12 to 48 hours depending on joint depth, temperature, and humidity.
Усунення несправностей
- Погана адгезія: Ensure surfaces are clean, dry, and free of contaminants before application. Roughening smooth surfaces slightly can improve adhesion.
- Cracking/Shrinkage: Apply caulk in appropriate bead sizes. Excessive bead size or rapid drying in very dry conditions can lead to cracking. Ensure proper cure time before painting or exposing to stress.
- Difficulty Smoothing: Ensure the smoothing tool or finger is adequately wet. Smooth the bead immediately after application before a skin forms.
- Color Discrepancy After Curing: While the product is almond, environmental factors or specific surface interactions can sometimes affect the final cured color. Test a small, inconspicuous area first if color matching is critical.
Технічні характеристики
| Атрибут | Значення |
|---|---|
| Номер моделі | 2102 |
| Колір | Мигдаль |
| матеріал | Вініл |
| Форма предмета | Рідина |
| Розмір | 10 унцій |
| Об'єм рідини | 10 рідких унцій |
| Вага товару | 1.12 унції |
| Розміри продукту | 2 x 2 x 11.25 дюймів |
| Температурний діапазон застосування | Від 45°F до 100°F |
| Performance Temperature Range | Від -20°F до 100°F |
| Час повного затвердіння | 48 Hours (Functional) |
| Рівень водонепроникності | Водостійкий |
| База | Latex Vinyl |
| характеристики | Paintable, Water Clean Up, Seals, Bonds |
| Виробник | Dap Incorporated |
| UPC | 051136021025 |
Інформація про гарантію
Specific warranty details for the DAP 2102 Phenoseal Vinyl Adhesive Caulk are not available in the provided product data. Please refer to the product packaging or contact DAP customer support for warranty information.
Підтримка клієнтів
Contact information for customer support is not available in the provided product data. For assistance, please visit the official DAP webсайт або зверніться до контактної інформації, зазначеної на упаковці продукту.
