вступ
This instruction manual provides comprehensive guidance for the Lancom AirLancer Cable NJ-NP Out/3 m. It covers essential information regarding the cable's purpose, proper setup procedures, operational considerations, routine maintenance, and troubleshooting tips. Adhering to these instructions will ensure optimal performance and longevity of your cable.
Продукт закінченийview
The Lancom AirLancer Cable NJ-NP Out/3 m is a high-quality, durable coaxial cable designed for reliable outdoor antenna connections. It features N-type male and female connectors, ensuring secure and efficient signal transmission for various networking applications. Its robust construction makes it suitable for demanding outdoor environments.
A coiled black coaxial cable with silver N-type male and female connectors on each end, designed for outdoor use. The cable is approximately 3 meters in length and features durable insulation suitable for external installations.
Ключові характеристики:
- тип: Coaxial Cable (RG 223/U)
- Роз'єми: N-Type Male to N-Type Female
- Довжина: 3 метрів
- Імпеданс: 50 Ом
- застосування: Designed for outdoor use, suitable for antenna connections.
Налаштування
Proper installation of the Lancom AirLancer Cable is crucial for optimal performance. Follow these steps to connect the cable:
- Визначте сполучники: Locate the N-type male connector on one end and the N-type female connector on the other end of the cable.
- Підключення до антени: Attach the appropriate connector (typically N-type male) to your outdoor antenna's N-type female port. Ensure the connection is finger-tight and secure.
- Підключення до пристрою: Attach the other end of the cable (N-type female) to the N-type male port of your networking device, such as an access point, router, or surge protector. Again, ensure a secure, finger-tight connection.
- Прокладка кабелю: Route the cable carefully, avoiding sharp bends, kinks, or areas where it might be pinched or damaged. Use cable ties or clips to secure it if necessary.
- Захист від погодних умов: For outdoor installations, consider using weatherproofing tape or sealant around the connectors to prevent moisture ingress, especially in exposed areas.
Примітка: Always handle connectors by their metal bodies, not by the cable itself, to prevent damage to the internal wiring.
Операційна
The Lancom AirLancer Cable NJ-NP Out/3 m is a passive component designed to transmit radio frequency (RF) signals between an antenna and a compatible device. Once properly installed and connected, the cable operates continuously without requiring user intervention. Its function is to provide a low-loss pathway for RF signals, ensuring reliable communication for your wireless network.
Ensure that both connected devices (antenna and networking equipment) are powered on and configured correctly according to their respective manuals for the cable to facilitate signal transmission effectively.
Технічне обслуговування
Regular maintenance helps preserve the performance and extend the lifespan of your Lancom AirLancer Cable:
- Візуальний огляд: Periodically inspect the entire length of the cable and its connectors for any signs of physical damage, such as cuts, abrasions, severe bends, or corrosion on the connectors.
- Очищення роз'єму: If connectors appear dirty or corroded, gently clean them using a soft, lint-free cloth and a small amount of electrical contact cleaner. Ensure connectors are dry before re-connecting.
- Безпечні з'єднання: Verify that all cable connections remain tight and secure. Loose connections can lead to signal degradation.
- Захист навколишнього середовища: For outdoor installations, ensure that any weatherproofing applied to the connectors is intact and providing adequate protection against moisture and UV exposure. Reapply if necessary.
- Зберігання: If the cable is to be stored, coil it loosely without sharp bends and store it in a clean, dry environment away from extreme temperatures and direct sunlight.
Усунення несправностей
If you experience issues with your network connection that you suspect are related to the cable, consider the following:
| проблема | Можлива причина | Рішення |
|---|---|---|
| Poor or No Signal | Послаблені з’єднання Пошкоджений кабель Неправильний тип кабелю | Ensure all connectors are securely tightened. Перевірте кабель на наявність видимих пошкоджень; за потреби замініть. Verify the cable is the correct 50 Ohm impedance for your equipment. |
| Переривчасте підключення | Корозійні роз'єми Minor cable damage Втручання навколишнього середовища | Clean connectors thoroughly. Inspect for subtle damage; consider replacing if issues persist. Ensure proper grounding and shielding of your setup. |
| Physical Damage to Cable/Connectors | Неправильне поводження Вплив навколишнього середовища | Handle the cable by its body, not by the connectors. Ensure proper weatherproofing for outdoor use. Replace damaged components. |
Технічні характеристики
Detailed technical specifications for the Lancom AirLancer Cable NJ-NP Out/3 m:
| Атрибут | Значення |
|---|---|
| Бренд | Lancom |
| Виробник | LANCOM |
| Модель | LS61230 |
| Номер деталі | 4044144612305 |
| Тип кабелю | Coaxial (RG 223/U) |
| Роз'єми | N-Type Male to N-Type Female |
| Імпеданс | 50 Ом |
| Довжина | 3 метрів |
| Розміри продукту | 310.01 х 257.99 х 40.01 см |
| Вага товару | 358.34 г |
| Дата першої доступності | 7 серпня 2012 р |
Інформація про гарантію
Specific warranty terms for the Lancom AirLancer Cable NJ-NP Out/3 m may vary depending on your region and the point of purchase. Please refer to the warranty documentation provided with your product or contact your retailer for detailed information regarding warranty coverage and claims procedures.
Підтримка
For technical assistance, product inquiries, or support related to the Lancom AirLancer Cable NJ-NP Out/3 m, please contact your authorized Lancom dealer or visit the official Lancom webсайт із ресурсами підтримки та контактною інформацією.
