GEARWRENCH Drum Brake Adjusting Tool 287D User Manual

1. Продукт закінчивсяview

The GEARWRENCH Drum Brake Adjusting Tool 287D is designed for precise adjustment of drum brakes. This tool facilitates the proper spacing of brake shoes within the drum, which is crucial for effective braking performance and longevity of brake components. Its robust construction ensures durability and reliable operation in automotive maintenance tasks.

Image 1.1: The GEARWRENCH Drum Brake Adjusting Tool 287D, a sturdy metal tool with a bent shaft and flat ends for engaging brake adjusters.

2. Інформація про безпеку

• Always wear appropriate personal protective equipment, including safety glasses and gloves, when working on vehicle braking systems.
• Ensure the vehicle is securely supported on jack stands and the parking brake is engaged before beginning any work.
• Refer to the vehicle manufacturer's service manual for specific drum brake adjustment procedures and specifications.
• Keep hands and fingers clear of moving parts and pinch points during adjustment.

3. Налаштування

The GEARWRENCH Drum Brake Adjusting Tool 287D requires no assembly. Before use, inspect the tool for any signs of damage or wear. Ensure the working ends are clean and free of debris to prevent damage to brake components.

Зображення 3.1: Крупний план view of the GEARWRENCH Drum Brake Adjusting Tool 287D, highlighting its sturdy construction and the angled tip designed for brake adjusters.

4. Інструкція з експлуатації

This tool is specifically designed to engage and turn the star wheel adjuster found in many drum brake systems. The angled design allows for access through the backing plate or inspection holes.

1. Підготуйте транспортний засіб: Lift the vehicle and secure it on jack stands. Remove the wheel and tire assembly. Depending on the vehicle, you may need to remove the brake drum to access the adjuster, or access it through an adjustment hole in the backing plate.
2. Locate the Adjuster: Identify the star wheel adjuster mechanism. This is typically located at the bottom of the brake shoe assembly.
3. Задійте інструмент: Insert the angled end of the GEARWRENCH 287D tool into the adjustment hole or directly onto the star wheel. The flat tip is designed to securely grip the teeth of the star wheel.
4. Adjust the Brake: Rotate the tool to turn the star wheel. Turning the star wheel in one direction will expand the brake shoes, while turning it in the opposite direction will retract them. Adjust until a slight drag is felt when rotating the drum by hand, then back off slightly until the drum rotates freely with minimal drag.
5. Verify Adjustment: Reinstall the brake drum (if removed) and wheel. Test the brake pedal feel and ensure proper braking function before driving the vehicle.

Image 4.1: A hand using the GEARWRENCH Drum Brake Adjusting Tool 287D to adjust a drum brake mechanism through an access hole on a vehicle's backing plate.

5. Технічне обслуговування та догляд

• After each use, clean the tool with a dry cloth to remove any grease, dirt, or brake dust.
• Зберігайте інструмент у сухому місці, щоб запобігти іржі та корозії.
• Avoid using the tool as a pry bar or for purposes other than its intended design, as this can cause damage.

6. Технічні характеристики

7. Інформація про гарантію

GEARWRENCH tools are manufactured to high standards and are designed for durability. For specific warranty details regarding the 287D Drum Brake Adjusting Tool, please refer to the official GEARWRENCH warranty policy available on their webсайту або зв’яжіться зі службою підтримки клієнтів.

8. Підтримка клієнтів

For further assistance, technical support, or inquiries regarding the GEARWRENCH Drum Brake Adjusting Tool 287D, please visit the official GEARWRENCH webсайті або зверніться до їхнього відділу обслуговування клієнтів. Ви можете знайти більше інформації та продуктів на GEARWRENCH Store on Amazon.