вступ
The DigiTech Whammy Pedal Re-issue is a premier guitar effects pedal designed to provide advanced pitch-shifting capabilities. It offers a wide range of expressive effects, including whammy, harmony, and detune settings, allowing musicians to explore new sonic landscapes. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Whammy Pedal to ensure optimal performance and longevity.
Ключові характеристики
- 6 Whammy Modes: Includes the popular 2 Octave Up setting, widely recognized in numerous musical compositions.
- 10 Harmony Bend Modes: Features settings like 2nd Up to 3rd Up, designed to simulate classic pedal steel bends.
- Педаль експресії: Provides dynamic control over dive bombs and pitch bends.
- Advanced Pitch Detection: Equipped with a cutting-edge engine specifically engineered for guitar, ensuring fast and accurate pitch shifting.
- Підключення MIDI: MIDI In and Out/Thru ports allow for external control of pitch bends via control change (CC) messages.
Налаштування
Proper setup is crucial for the optimal performance of your DigiTech Whammy Pedal. Follow these steps to connect your pedal to your guitar and ampліфірник.
- Підключення живлення: Connect the included 9V DC power supply to the power input jack on the pedal. Ensure the power supply is compatible with the pedal's voltage вимоги.
- Інструментальний вхід: Connect your guitar to the "INPUT" jack on the side of the Whammy Pedal using a standard 1/4-inch instrument cable.
- Amplifier Вихід: Connect the "OUTPUT" jack of the Whammy Pedal to your ampвхідний сигнал охолодження за допомогою іншого інструментального кабелю 1/4 дюйма.
- MIDI-підключення (додатково): If you plan to control the pedal via MIDI, connect your MIDI controller to the "MIDI IN" port. The "MIDI OUT/THRU" port can be used to pass MIDI data to other devices.
Малюнок 1: Сторона view of the DigiTech Whammy Pedal, highlighting the 1/4-inch input jack and the MIDI input/output ports for connecting your instrument, amplifier, and external MIDI devices.
Інструкція з експлуатації
The DigiTech Whammy Pedal offers a variety of pitch-shifting effects controlled by a rotary knob and the expression pedal. Familiarize yourself with the different modes to unlock the pedal's full potential.
Рисунок 2: Зверху вниз view of the DigiTech Whammy Pedal, showing the Harmony, Whammy, and Detune sections, along with the rotary selector knob and the expression pedal.
Вибір ефектів
Use the large rotary knob on the right side of the pedal to select between the different effect modes: Гармонія, Whammy, і Розстроїти. Each mode has multiple sub-settings indicated by LEDs. The active setting's LED will illuminate when selected.
- Harmony Modes: These modes add a harmonized note to your original signal. Examples include Octave Up/Down, 4th, 5th, and various 3rd/7th combinations.
- Whammy Modes: These modes shift your original note up or down by a specified interval as you move the expression pedal. Common settings include 2 Octave Up, 1 Octave Up, 5th Up, 4th Up, 2 Octave Down, Dive Bomb, and Drop Tune.
- Detune Modes: These modes create a subtle chorus-like effect by slightly detuning your signal. Options include Shallow and Deep detune.
Using the Expression Pedal
The expression pedal is integral to the Whammy effect. In Whammy modes, rocking the pedal forward (toe down) or backward (heel down) will sweep the pitch through the selected interval. For Harmony and Detune modes, the expression pedal typically controls the wet/dry mix or the intensity of the effect.
Рисунок 3: Кутовий view of the DigiTech Whammy Pedal, demonstrating the range of motion of the expression pedal, which controls the pitch shift or effect intensity.
Activating the Pedal
To engage or bypass the effect, press the footswitch located on the lower right side of the pedal. An illuminated LED near the footswitch indicates that the effect is active.
Технічне обслуговування
To ensure the longevity and proper functioning of your DigiTech Whammy Pedal, follow these maintenance guidelines:
- Прибирання: Use a soft, dry cloth to wipe down the pedal's exterior. Avoid abrasive cleaners or solvents, as they may damage the finish or internal components.
- Зберігання: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and excessive moisture.
- Управління кабелем: Always disconnect cables by pulling on the plug, not the cable itself, to prevent damage to the connectors and internal wiring.
- Джерело живлення: Only use the specified 9V DC power supply. Using an incorrect power supply can damage the unit and void the warranty.
Усунення несправностей
If you encounter issues with your DigiTech Whammy Pedal, refer to the following common problems and their solutions:
| проблема | Можлива причина | Рішення |
|---|---|---|
| Немає звуку або слабкий сигнал. | Incorrect cable connections, faulty cables, incorrect power supply, pedal bypassed. |
|
| Pitch shifting is inaccurate or glitchy. | Input signal too low or too high, pedal placed incorrectly in signal chain, dirty expression pedal sensor. |
|
| MIDI control not working. | Incorrect MIDI cable connection, wrong MIDI channel, controller not sending correct CC messages. |
|
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Вага товару | 1 фунта |
| Розміри продукту | 8 см (Д) x 6.3 см (Ш) x 2.5 см (В) |
| Колір | Червоний |
| Стиль | експресія |
| Бренд | DigiTech |
| томtage | 9 вольт |
| Джерело живлення | Провідний електричний |
| Формат сигналу | Аналоговий |
| Апаратний інтерфейс | 1/4-дюймовий аудіо |
| Номер моделі товару | Педаль Whammy |
| Дата першої доступності | 7 серпня 2005 р |
Гарантія та підтримка
The DigiTech Whammy Pedal comes with a standard manufacturer's warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official DigiTech website. For technical support, service, or replacement parts, please contact DigiTech customer service through their official channels.
