Продукт закінченийview
The MSD Digital 6-Plus Ignition Control is an advanced digital ignition system designed for high-performance automotive applications. It utilizes a 15 Megahertz microcontroller for precise control of ignition timing and rev limits. This unit is engineered for efficiency and reliability, producing high spark energy with reduced current draw.
Ключові характеристики:
- Adjustable rotary switches for rev limits in 100 rpm increments.
- Поодинокі сtage retard for nitrous and top-end performance.
- Start retard function to ease pressure on the starter, flywheel, and engine.
- Adjustable magnetic pickup compensation for accurate trigger signals.
- LED display for warning of trigger signal problems or faulty charging system.
- Polyurethane potted for enhanced vibration and water protection.
- C.A.R.B Approved.
Налаштування та встановлення
Proper installation is crucial for the optimal performance and longevity of your MSD Digital 6-Plus Ignition Control. Always disconnect the battery before beginning any electrical work.
Монтаж пристрою:
Select a mounting location that is away from direct engine heat, exhaust, and excessive vibration. Ensure the unit is securely fastened using the provided hardware. The unit should be mounted with the finned heat sink exposed to airflow for proper cooling.
Figure 1: The MSD Digital 6-Plus Ignition Control unit, showing its red finned heat sink design.
Підключення проводів:
Refer to the wiring diagram specific to your vehicle and ignition system. The Digital 6-Plus requires connections for power, ground, coil primary, and trigger input. Ensure all connections are clean, secure, and properly insulated.
Figure 2: Complete kit including the MSD Digital 6-Plus Ignition Control unit, wiring harnesses, and various installation accessories.
Малюнок 3: Детально view of the primary wiring harness, showing red, black, and blue wires for power, ground, and coil connections.
Figure 4: Close-up of the trigger input harness, typically connecting to the distributor or crank trigger.
Початкове включення:
After all connections are made, reconnect the battery. Observe the LED display for any warning indicators. Consult the troubleshooting section if any issues arise.
Operating the Digital 6-Plus
The Digital 6-Plus offers several adjustable features to optimize engine performance.
Rev Limit Adjustment:
The unit features rotary switches for setting two distinct rev limits in 100 RPM increments. These limits can be used for launch control or over-rev protection. Refer to the specific instructions for setting these limits based on your engine's requirements.
Figure 5: Various small components, including different types of electrical connectors and mounting hardware, used for installation and adjustment.
Одномісний Stage Retard:
This feature allows for a single stage of timing retard, commonly used with nitrous oxide systems or for fine-tuning top-end performance. Ensure proper calibration to avoid engine damage.
Start Retard:
The start retard function reduces ignition timing during cranking, making starting easier and reducing stress on the starter motor and flywheel. This feature is automatically engaged during engine start-up.
Технічне обслуговування
The MSD Digital 6-Plus Ignition Control is designed for durability and requires minimal maintenance. However, periodic checks can ensure continued optimal performance.
- Перевірка проводки: Periodically inspect all wiring connections for signs of wear, corrosion, or loose terminals. Ensure all connections remain secure.
- Чистота приміщення: Keep the unit clean and free of excessive dirt, oil, or debris. A clean unit allows for better heat dissipation.
- Безпека монтажу: Verify that the unit remains securely mounted and that mounting hardware is tight.
Усунення несправностей
This section provides guidance for common issues you might encounter with your MSD Digital 6-Plus Ignition Control.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Engine Cranks but No Spark | Loose or corroded power/ground connections; Faulty trigger signal; Damaged coil; Unit malfunction. | Перевірте об'єм батареїtage and ground connections. Verify trigger signal integrity. Test coil resistance. Consult MSD technical support if unit is suspected faulty. |
| Engine Misfires or Runs Rough | Incorrect wiring; Spark plug or wire issues; Improper rev limit settings; EMI interference. | Review wiring diagram. Inspect spark plugs and wires. Adjust rev limits. Ensure proper grounding and shielding to minimize EMI. |
| LED Warning Light On | Trigger signal problems; Faulty charging system. | Check trigger input connections and sensor. Verify alternator and battery health. |
For more complex issues, it is recommended to contact MSD technical support or a qualified automotive technician.
Технічні характеристики
| Специфікація | Значення |
|---|---|
| Робочий випtage | 12-18 volts, negative ground (Full voltage output down to 7 volts supply) |
| Поточний розіграш | 0.7 amps per 1,000 rpm (7.2 amps) with 14V battery @ 10,000 rpm |
| Діапазон обертів | 12,500 rpm with 14.4 volt supply |
| Тривалість іскри | 20° crankshaft rotation through 3,300 rpm |
| Spark Energy | 135 millijoules per spark |
| вага | 3.7 фунтів (1.4 кілограмів) |
| Розміри (Д x Ш x В) | 8.5"L x 4.5"W x 2.2"H (approx. 9.45 x 2.36 x 9.45 inches item dimensions) |
| томtage Output Max (Primary) | 535 Volts delivered to coil |
| томtage Output Max (Secondary) | 45,000 Volts (with MSD HVC Coil) |
| Основний матеріал | Поліуретан |
| Виробник | Запалювання MSD |
| Назва моделі | MSD 6520 Digital 6-Plus Ignition Control Box |
| Номер деталі | 6520 |
| UPC | 085132065202 |
Гарантія та підтримка
Інформація про гарантію:
The product comes with a manufacturer's warranty. For specific details regarding the warranty period and coverage, please refer to the documentation included with your product or contact MSD directly. The provided information states "Warranty Description: Warranty".
Юридична відмова від відповідальності:
ПОПЕРЕДЖЕННЯ КАЛІФОРНІЇ: Рак та репродуктивна шкода - www.P65Warnings.ca.gov
Підтримка клієнтів:
For technical assistance, installation questions, or troubleshooting beyond the scope of this manual, please contact MSD customer support. Contact information can typically be found on the manufacturer's webсайт або упаковка продукту.
