вступ
This manual provides detailed instructions for the installation, operation, and maintenance of your Holley Electric Fuel Pump, Model 12-801-1. Designed for performance and reliability, this pump is a key component in your vehicle's fuel system. Please read this manual thoroughly before installation and operation to ensure proper function and safety.
Інформація про безпеку
Завжди дотримуйтесь наступних заходів безпеки:
- Ensure the vehicle's battery is disconnected before beginning any installation or maintenance.
- Працюйте в добре провітрюваному приміщенні, щоб уникнути вдихання парів палива.
- Використовуйте відповідні засоби індивідуального захисту, включаючи захисні окуляри та рукавички.
- Keep fire extinguishers readily available when working with fuel systems.
- Do not smoke or use open flames near fuel.
- Refer to your vehicle's service manual for specific fuel system procedures.
Компоненти продукту
The Holley Electric Fuel Pump kit includes the following components:
малюнок 1: Holley Electric Fuel Pump (Model 12-801-1) with included mounting bracket, bolts, and nuts. This image shows the complete kit as supplied.
малюнок 2: Крупним планом view of the mounting bracket and hardware. The kit includes two bolts, two nuts, and two lock washers for secure installation.
малюнок 3: Фронт view of the Holley Electric Fuel Pump, highlighting the red label and electrical connections. Note the inlet and outlet ports.
малюнок 4: Під кутом view of the Holley Electric Fuel Pump, showing the machined exterior and the robust construction of the unit.
Встановлення та налаштування
Proper installation is crucial for the performance and longevity of your fuel pump. Follow these steps carefully:
- Місце монтажу: Select a mounting location as close to the fuel tank as possible, below the fuel level, to ensure a gravity feed to the pump. The pump should be mounted securely using the provided bracket and hardware. Ensure the pump is mounted vertically with the motor at the top to prevent vapor lock.
- З'єднання паливопроводів:
- Install a 100-micron fuel filter between the fuel tank and the pump inlet. This protects the pump from large debris.
- Install a 40-micron fuel filter between the pump outlet and the carburetor/fuel log. This protects the carburetor from fine particles.
- Use appropriate fuel-resistant hoses and clamps for all connections. Ensure all connections are tight to prevent leaks.
малюнок 5: Typical fuel system diagram illustrating the recommended placement of the Holley In-Line Fuel Pump and associated fuel filters (100 micron before pump, 40 micron after pump).
- Електропроводка:
- Connect the positive (+) terminal of the pump to a switched 12V power source, preferably through a relay triggered by the ignition.
- Connect the negative (-) terminal of the pump to a good chassis ground.
- Install an inline fuse (e.g., 10-amp) in the positive wire as close to the power source as possible to protect the circuit. The motor draws approximately 2 amps.
- Ensure all electrical connections are secure and insulated to prevent shorts.
- Підготовка системи: After installation, cycle the ignition key a few times (without starting the engine) to allow the pump to prime the fuel system and build pressure. Check for any leaks.
Операція
The Holley Electric Fuel Pump is designed for continuous operation once the engine is running. It maintains a maximum pressure of 7 psi, suitable for carbureted applications.
малюнок 6: Performance curve illustrating the relationship between fuel flow (GPH) and fuel pressure (PSI) for the Holley Electric Fuel Pump. Note the decrease in flow as pressure increases.
The pump's rotor/vane design ensures consistent fuel delivery. For optimal performance, ensure your fuel system is free of air pockets and restrictions.
Технічне обслуговування
Regular maintenance ensures the longevity and reliable operation of your fuel pump:
- Заміна паливного фільтра: Regularly inspect and replace both the 100-micron pre-pump filter and the 40-micron post-pump filter. Clogged filters can restrict fuel flow and put undue strain on the pump. Refer to your vehicle's maintenance schedule or replace every 12,000 miles (20,000 km) or annually, whichever comes first.
- Шланг і Clamp Огляд: Periodically check all fuel hoses for cracks, hardening, or signs of leakage. Ensure all clampщільно закріплені та надійно закріплені.
- Electrical Connection Check: Verify that all electrical connections to the pump are clean, tight, and free of corrosion.
- Безпека монтажу: Confirm that the pump remains securely mounted and that mounting hardware is tight.
Усунення несправностей
| проблема | Можлива причина | Рішення |
|---|---|---|
| Насос не працює | No power to pump; Blown fuse; Faulty wiring; Pump motor failure. | Check electrical connections and fuse. Test for 12V at pump terminals. Inspect wiring for damage. If power is present and wiring is good, pump may need replacement. |
| Low fuel pressure/flow | Clogged fuel filters; Restricted fuel line; Air leak in suction line; Low voltage to pump; Worn pump. | Replace fuel filters. Inspect fuel lines for kinks or damage. Check all connections for air leaks. Verify proper voltage supply. If all else fails, pump may be worn. |
| Надмірний шум від насоса | Air in fuel line (vapor lock); Restricted inlet; Loose mounting; Worn pump. | Ensure pump is gravity fed and below fuel level. Check pre-pump filter for clogging. Tighten mounting hardware. If noise persists, pump may be failing. |
| Витоки палива | Ослаблений шлангamps; Damaged fuel lines; Faulty fittings. | Затягніть усі шланги клamps. Replace any damaged fuel lines or fittings. |
Технічні характеристики
| Бренд | Холлі |
| Номер моделі | 12-801-1 |
| Тип | Електричний паливний насос |
| Максимальний тиск | 7 psi |
| Поточний розіграш | 2 amps |
| Розмір вхідного з'єднання | 0.38 дюймів |
| Розмір розетки | 0.38 дюймів |
| Тип підгонки | Специфічний транспортний засіб |
| Тип обслуговування автомобіля | Автомобіль, Вантажівка |
| матеріал | метал |
| Вага товару | 1.45 кілограма |
| Зовнішня обробка | Механічна обробка |
Гарантія та підтримка
Holley products are manufactured to high standards and are backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Holley webсайт.
For technical assistance, troubleshooting, or parts inquiries, please contact Holley customer support. Contact information can typically be found on the Holley webсайт або упаковка продукту.
Інтернет-ресурси: www.holley.com
