Oster 4093-008 5-Cup Glass Jar 2-Speed Beehive Blender Instruction Manual

вступ

The Oster Beehive Blender, model 4093-008, is designed for efficient blending with its 600-watt motor and two-speed toggle control. It features a durable 5-cup glass jar, thermal shock tested for versatility, and a stainless steel ice crusher blade. The blender incorporates an All Metal Drive system for enhanced durability and longevity. This manual provides essential information for safe and effective use of your blender.

Image: Oster Beehive Blender highlighting its features and capacity.

Налаштування

Before using your Oster Beehive Blender for the first time, please follow these setup instructions:

1. Unpack all components: blender base, glass jar, blade assembly, and lid.
2. Before initial use, wash the glass jar, lid, and blade assembly in warm, soapy water. Rinse thoroughly and dry completely.
3. Place the blade assembly onto the bottom of the glass jar, ensuring it is securely seated.
4. Place the rubber sealing gasket over the blade assembly.
5. Screw the base collar onto the bottom of the jar, tightening firmly to prevent leaks.
6. Place the assembled jar onto the blender base, aligning the tabs on the jar with the slots on the base. Ensure it is seated correctly and stable.
7. Надійно закрийте скляну банку кришкою.

Image: The 5-cup glass jar, ready for ingredients.

Інструкція з експлуатації

Follow these steps for safe and effective operation of your blender:

1. Перед додаванням інгредієнтів переконайтеся, що блендер відключений від мережі.
2. Place ingredients into the assembled glass jar. Do not overfill; ensure the liquid level is below the maximum fill line.
3. Securely place the lid on the jar. The filler cap can be removed to add ingredients during blending.
4. Plug the blender into a standard North American electrical outlet.
5. Select the desired speed using the toggle switch: 'LOW' for softer ingredients or 'HIGH' for harder ingredients and ice crushing. For short bursts of power, use the 'PULSE' function by quickly toggling the switch to 'HIGH' and releasing.
6. Allow the blender to run until the desired consistency is achieved. Do not operate continuously for more than 3 minutes.
7. To stop blending, toggle the switch to 'OFF'.
8. Unplug the blender from the outlet before removing the jar or pouring contents.

Image: The blender base featuring the classic toggle switch for speed control.

Демонстраційне відео

Video: An official demonstration of the Oster 4093-008 blender in use, showcasing its blending capabilities.

Зображення: Прample of a blended beverage, demonstrating the blender's output.

Технічне обслуговування та очищення

Proper maintenance ensures the longevity and performance of your blender:

1. Always unplug the blender from the electrical outlet before cleaning.
2. Disassemble the jar by unscrewing the base collar and carefully removing the blade assembly and rubber sealing gasket.
3. The glass jar, lid, and blade assembly are dishwasher safe for convenient cleaning. Alternatively, wash them in warm, soapy water, rinse thoroughly, and dry completely.
4. Exercise extreme caution when handling the blade assembly as the blades are sharp.
5. Протріть основу блендера рекламоюamp cloth. Do not immerse the blender base in water or any other liquid.
6. Перед тим, як знову зібрати та покласти блендер на зберігання, переконайтеся, що всі деталі повністю сухі.

Усунення несправностей

Якщо у вас виникли будь-які проблеми з блендером, зверніться до наступних поширених проблем та способів їх вирішення:

• Блендер не вмикається:
  Ensure the power cord is securely plugged into a working electrical outlet. Check if the outlet is functional by plugging in another appliance. Verify the blender jar is correctly seated on the base.
• Blender leaks during operation:
  Confirm the blade assembly and sealing gasket are correctly installed and the base collar is tightly screwed onto the jar. Ensure the lid is securely placed on the jar. Do not overfill the jar beyond the maximum fill line.
• Інгредієнти не змішуються рівномірно:
  Add more liquid if the mixture is too thick. Use the 'PULSE' function to break down larger pieces before continuous blending. Ensure the blade assembly is clean and free from obstructions.

Технічні характеристики

Ключові характеристики

• All Metal Drive: This blender features an All Metal Drive system, where the two pieces that connect are metal instead of plastic, ensuring greater durability and a longer-lasting performance.
• Durable Die-Cast Construction: The robust construction is designed to withstand heavy use, providing reliable operation over time.

Image: Illustration of the Oster All Metal Drive system, emphasizing durability.

Image: Graphic highlighting the blender's durable die-cast construction.

Гарантія

The Oster 4093-008 Beehive Blender is backed by a 10-Year DURALAST All-Metal Drive Limited Warranty, ensuring lasting durability and peace of mind. For complete details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product packaging or visit the official Oster webсайт для найновішої інформації.

Підтримка

For product assistance, replacement parts, or any further inquiries regarding your Oster 4093-008 Beehive Blender, please visit the official Oster website or contact their customer service department. When contacting support, please have your purchase receipt and the model number (4093-008) readily available for faster and more efficient service.

Oster Official Webсайт: www.oster.com