Cada C61076 RC Tiltrotor Aircraft Instruction Manual

1. Вступ

Thank you for choosing the Cada C61076 RC Tiltrotor Aircraft building block set. This set allows you to construct a detailed and functional remote-controlled tiltrotor aircraft model with 1436 pieces. Designed for enthusiasts aged 8 and above, this model features intricate mechanical functions, including rotating propellers, adjustable rotor angles, and RC driving and steering capabilities when equipped with the optional power pack.

The Cada C61076 RC Tiltrotor Aircraft model.

2. Інформація про безпеку

• Небезпека задухи: This product contains small parts and is not suitable for children under 3 years old. Adult supervision is recommended during assembly and play for younger users.
• Безпека батареї: If using the optional power pack, ensure batteries are inserted correctly according to polarity. Do not mix old and new batteries, or different types of batteries. Remove batteries if the product is not used for an extended period. Do not attempt to recharge non-rechargeable batteries.
• Попередження щодо пропозиції 65 Каліфорнії: ⚠ ПОПЕРЕДЖЕННЯ: Цей продукт може містити хімічні речовини, зокрема фталати (DEHP), які, як відомо штату Каліфорнія, спричиняють рак, вроджені вади розвитку чи інші репродуктивні порушення. Для отримання додаткової інформації перейдіть за посиланням www.P65Warnings.ca.gov.
• Операційне середовище: Operate the RC model in open areas, away from obstacles, people, and pets. Avoid operating in wet conditions or near water.

3. Вміст упаковки

The Cada C61076 set includes:

• 1436 елемент будівельного блоку
• Інструкція з монтажу
• Стенд для демонстрації

Optional Power Pack (Sold Separately):

• 1 x L Size Motor (Pro series)
• 1 x Servo (Pro series)
• 1 x Lipo Battery Box
• 1 x 2.4GHz Radio Control

Optional power pack components (sold separately).

4. Технічні характеристики

Product dimensions and piece count.

Детальна інформація про продукт.

5. Налаштування

5.1 Збірка

Follow the step-by-step instructions provided in the included building manual to assemble your Cada C61076 Tiltrotor Aircraft. Ensure all pieces are securely connected to prevent structural instability.

5.2 Optional Motorization and Battery Installation

For remote control functionality, the optional power pack (sold separately) is required. This includes an L size motor, a Servo, a Lipo Battery Box, and a 2.4GHz Radio Control.

• Install Lipo Battery Box: Carefully integrate the Lipo Battery Box into the designated compartment within the aircraft model as shown in the assembly instructions. This powers the rotors and driving mechanism.
• Install L Size Motor: Connect the L size motor to the appropriate gears for rotor rotation and driving, following the assembly guide.
• Install Servo: Connect the Servo to the steering mechanism for controlling the aircraft's direction.
• Встановіть батареї пульта дистанційного керування: Open the battery compartment on the 2.4GHz Radio Control and insert 2x AA 1.5V batteries (not included), observing correct polarity.

Internal components: 2.4GHz Lipo Battery Box, L Size Motor (Pro series), and Servo (Pro series).

5.3 Display Stand Assembly

The included display stand can be assembled to showcase your completed model. Follow the instructions to connect the stand components and securely place the aircraft on it.

Assembly of the display stand.

6. Інструкція з експлуатації

The Cada C61076 Tiltrotor Aircraft features three functional modes controlled by toggles and the remote control. Ensure the optional power pack is installed and powered on before operation.

6.1 Дистанційне керуванняview

Remote control layout with indicator light, power button, driving/rotor rotations, and steering controls.

• Кнопка живлення: Вмикає/вимикає пульт дистанційного керування.
• Світловий індикатор: Shows the remote control's status.
• Лівий джойстик: Controls driving and rotor rotations.
• Правий джойстик: Controls steering.

6.2 Functional Modes (3 Gears)

The aircraft has three distinct operational modes, or 'gears' that can be engaged using the internal toggles and external knob/remote control.

Diagram of the control mechanism showing toggles and functions.

• 1st Gear: Propellers Rotation, Rotors Vertical Position
  To engage: Move the left toggle forward. Then, use the ручка on the aircraft to set the rotors to a vertical position, allowing for propeller rotation.

1st Gear: Move left toggle forward, use knob for vertical rotor position and propeller rotation.

• 2nd Gear: Rotor Angle Change (85°)
  To engage: Move the right toggle forward. Використовуйте радіокерування to adjust the rotor angle by 85 degrees.

2nd Gear: Move right toggle forward, use radio control for 85-degree rotor angle change.

• 3rd Gear: RC Driving and Steering (Rotors Horizontal Position of 85°)
  To engage: Move the right toggle backward. Використовуйте ручка or радіокерування for rear wheel steering and driving. The rotors will be in a horizontal position of 85 degrees.

3rd Gear: Move right toggle backward, use knob/radio control for rear wheel steering.

6.3 Detailed Features

• Double Sit Cockpit: The cockpit features two seats for minifigures (not included).
• Відкриття дверей: The aircraft has functional opening doors.
• Tilt-Axis Gearbox: Allows for the dynamic adjustment of rotor angles.
• Double Tail: Enhances the realistic appearance and stability of the model.

Attention to details: Pitot tube, double sit cockpit, opening door, tilt-axis gearbox, double tail, rotors, control knob.

6.4 Відео з демонстрацією продукту

Watch this video for a comprehensive demonstration of the Cada C61076's features and remote control operation.

7. Технічне обслуговування

• Прибирання: Use a soft, dry cloth to gently wipe down the model and remote control. Avoid using harsh chemicals or abrasive materials.
• Зберігання: Store the model in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove batteries from the remote control and the Lipo Battery Box (if installed).
• Перевірте підключення: Periodically check all building block connections to ensure they are secure. For motorized models, ensure all electrical connections are firm.

8. Вирішення проблем

• Model not moving/rotors not spinning:
  - Ensure the optional power pack (Lipo Battery Box, L Size Motor, Servo) is correctly installed and fully charged.
  - Check that the remote control has fresh AA batteries and is powered on.
  - Verify all electrical connections are secure.
• Пульт дистанційного керування не реагує:
  - Replace the AA batteries in the remote control.
  - Ensure the remote control is within the operating range (~30m).
  - Check for any interference from other 2.4GHz devices.
• Складність зі складанням:
  - Refer to the detailed step-by-step building instructions provided with the set.
  - Double-check that you are using the correct pieces for each step.
• Is the helicopter flying?
  - Please note that this is a building block model designed for ground-based RC driving and steering, with functional rotating propellers and adjustable rotor angles. It is not designed for aerial flight.

9. Поради користувача

• Додатковий блок живлення: Remember that the motorization components (L size motor, Servo, Lipo Battery Box, and 2.4GHz Radio Control) are sold separately. If you desire RC functionality, ensure you purchase these components.
• Терпіння при складанні: Building this 1436-piece model requires patience and attention to detail. Take your time and enjoy the building process.
• Дисплей: Utilize the included display stand to proudly exhibit your completed Tiltrotor Aircraft model.

10. Інформація про відповідність

Цей продукт має сертифікат CE, що свідчить про відповідність європейським стандартам охорони здоров'я, безпеки та захисту навколишнього середовища.

11. Гарантія та підтримка

For any questions, concerns, or support regarding your Cada C61076 RC Tiltrotor Aircraft, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty claims.