Wiltec Pool Pump 18600 L/h User Manual

1. Вступ

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Wiltec Pool Pump, model 65829. This pump is designed for circulating and filtering water in pools ranging from 74 to 110 cubic meters, offering a high flow rate of 18,600 liters per hour and a maximum head of 13 meters. It is compatible with sand filter systems and features an integrated pre-filter for enhanced protection.

малюнок 1: Wiltec Pool Pump 18600 L/h in a typical pool setup. This image shows the pump connected to a pool system, highlighting its compact design and connection points.

2. Інформація про безпеку

Read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.

• Завжди відключайте насос від джерела живлення перед будь-яким технічним обслуговуванням або очищенням.
• Ensure the electrical installation complies with local regulations and is protected by a Residual Current Device (RCD) with a tripping current not exceeding 30 mA.
• Не використовуйте насос, якщо шнур живлення або вилка пошкоджені.
• The pump must be installed on a stable, level surface, protected from direct sunlight and adverse weather conditions.
• Ensure adequate ventilation around the pump motor to prevent overheating.
• This pump is designed for fresh water only, with a liquid temperature range of 0-35°C. Do not use with corrosive, flammable, or explosive liquids.

For detailed safety guidelines, please refer to the official Safety Information PDF document: Інформація про безпеку (PDF)

3. Компоненти та розміри виробу

The Wiltec Pool Pump consists of a robust motor, a pump housing with an integrated pre-filter, and inlet/outlet connections. Understanding the dimensions is crucial for proper installation and space planning.

малюнок 2: Product Dimensions. This diagram illustrates the pump's overall length (580 mm), width (242 mm), and height (367 mm), along with specific measurements for connections and components.

Ключові компоненти включають:

• Кошик попереднього фільтра: Located at the inlet, designed to capture debris larger than 3.9 mm.
• Двигун: 750W copper-wound motor with thermal overload protection.
• Корпус насоса: Міцна пластикова конструкція.
• Вхід / вихід: Standard connections for pool hoses.

4. Налаштування та встановлення

Proper installation is vital for the pump's performance and longevity. It is recommended that installation be performed by a qualified technician.

1. Розміщення: Position the pump on a firm, level surface as close to the pool as possible to minimize suction lift. Ensure it is below the water level if possible for self-priming.
2. Монтаж: Secure the pump to the surface using appropriate fasteners to prevent vibration and movement.
3. Сантехнічні підключення: Connect the pump's inlet to the pool skimmer/main drain line and the outlet to the sand filter and return lines. Ensure all connections are watertight using thread sealant tape or appropriate gaskets.
4. Електричне підключення: Connect the pump to a dedicated, properly grounded electrical circuit protected by an RCD. Verify that the power supply voltage matches the pump's requirements (230V, 50Hz).
5. Грунтовка: Before first use, fill the pre-filter housing with water to ensure the pump is primed. This prevents dry running and potential damage.

5. Інструкція з експлуатації

Після встановлення та заправки насос готовий до роботи.

1. Запуск насоса: Ensure all valves are open and the pre-filter is full of water. Connect the pump to the power supply. The pump will start circulating water.
2. Моніторинг продуктивності: Observe the water flow and pressure gauge (if installed on your filter system) to ensure optimal operation. The pump is designed for a maximum flow rate of 18,600 L/h and a maximum head of 13 meters.
3. Діапазон температур: The pump is designed to operate with liquid temperatures between 0°C and 35°C. Operating outside this range may damage the pump.
4. Зупинка насоса: Disconnect the pump from the power supply. Close any necessary valves to prevent water backflow.

малюнок 3: Optimal Performance. This image highlights the pump's maximum head of 13 meters and maximum flow rate of 18,600 L/h, along with the recommended liquid temperature range of 0-35°C.

6. Технічне обслуговування

Регулярне технічне обслуговування забезпечує довговічність та ефективну роботу вашого насоса для басейну.

• Очищення попереднього фільтра: The integrated pre-filter collects debris such as leaves, twigs, gravel, and hair. Regularly inspect and clean the pre-filter basket to maintain optimal flow and prevent pump strain. To clean, disconnect power, open the pre-filter lid, remove the basket, empty debris, and rinse thoroughly. Reassemble, ensuring the O-ring is properly seated and the lid is securely tightened.


малюнок 4: Pre-filter Function. This image demonstrates how the pump's pre-filter effectively captures various types of debris, such as leaves, twigs, gravel, and hair, protecting the pump's internal components.

• Огляд двигуна: Periodically check the motor for any unusual noises or excessive heat. The copper-wound motor is designed for stable operation and includes thermal overload protection.


малюнок 5: Robust Motor Design. This image provides a view of the pump's copper-wound motor, emphasizing its stable operation and built-in protection against overheating and overload.

• Генеральне прибирання: Тримайте зовнішню частину насоса чистою та вільною від бруду та сміття.
• Зимоутворення: In regions with freezing temperatures, drain the pump completely and store it in a dry, frost-free location during the off-season to prevent damage.

7. Вирішення проблем

Якщо у вас виникли проблеми з насосом, зверніться до наступних поширених проблем та способів їх вирішення:

If problems persist after attempting these solutions, contact a qualified service technician or Wiltec customer support.

8. Технічні характеристики

9. Гарантія та підтримка

Щоб отримати інформацію щодо гарантії, технічної підтримки або звернутися до сервісного центру, зверніться безпосередньо до продавця або виробника. Зберігайте чек про покупку як підтвердження покупки.

A Certificate of Conformity is available for this product: Certificate of Conformity (PDF)