AstroAI H2 Pro Cordless Tire Inflator User Manual

1. Вступ

Thank you for choosing the AstroAI H2 Pro Cordless Tire Inflator. This portable air compressor is designed for convenient and efficient inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. Featuring dual power supplies (DC 12V and built-in lithium battery), automatic shut-off, and an LED display, this device ensures reliable performance wherever you go. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Техніка безпеки

• Always ensure the inflator is placed on a stable, flat surface during operation to prevent movement due to vibration.
• Do not leave the inflator unattended while in use.
• Allow the pump to cool for at least 10 minutes after 15 minutes of continuous use to prevent overheating.
• Тримайте пристрій подалі від дітей і домашніх тварин.
• Не використовуйте нагнітач у вологих умовах або поблизу легкозаймистих рідин чи газів.
• Ensure the correct pressure is set for the item being inflated to avoid over-inflation, which can cause damage or injury. Refer to the item's manufacturer recommendations for appropriate pressure levels.
• Disconnect the power source when not in use or before performing any maintenance.

3. Вміст упаковки

• AstroAI H2 Pro Cordless Tire Inflator
• DC 12V Power Cable
• Air Hose with Screw-on Connector
• Various Nozzle Adapters (for balls, bicycles, etc.)
• Посібник користувача

4. Продукт закінчивсяview

The AstroAI H2 Pro is a compact and versatile tire inflator designed for ease of use and portability. It features a digital display, intuitive controls, and a built-in LED light for nighttime use.

Figure 1: AstroAI H2 Pro Cordless Tire Inflator, showcasinзавдяки компактному дизайну та вбудованій ручці.

Ключові характеристики:

• Dual Power Supplies: Operates via DC 12V car power outlet or built-in lithium battery for maximum flexibility.
• Швидка інфляція: Upgraded cylinder design for quicker inflation times.
• Автоматичне відключення: Автоматично зупиняється, коли досягається заданий тиск.
• Світлодіодний дисплей: Clear digital display shows real-time pressure and preset values.
• Кілька одиниць: Supports PSI, BAR, KPA, and KG/CM².
• Вбудована світлодіодна лампа: Забезпечує підсвічування для використання в умовах низької освітленості.
• Інтегроване сховище: Convenient compartment for storing accessories.

Figure 2: Close-up of the AstroAI H2 Pro's LED display and control buttons for setting pressure and units.

5. Налаштування

Before first use, ensure the device is fully charged if using the battery power supply. Connect the DC 12V power cable to your vehicle's cigarette lighter socket or ensure the internal battery is charged.

Figure 3: Demonstrates connecting the AstroAI H2 Pro using either the DC 12V power cable or utilizing its internal battery.

Підключення повітряного шланга:

1. Uncoil the air hose from its storage compartment.
2. Screw the air hose connector onto the valve stem of the item you wish to inflate. Ensure a tight seal to prevent air leakage.

6. Інструкція з експлуатації

Step-by-Step Inflation:

1. Увімкнення: Connect the power source (DC 12V or internal battery) and press the power button to illuminate the screen.
2. Виберіть одиницю: Press the 'M' button to cycle through the available pressure units (PSI, BAR, KPA, KG/CM²) until your desired unit is displayed.
3. Встановлений тиск: Use the '+' and '-' buttons to set the target pressure value. The screen will display both the preset value and the current pressure.
4. Підключитися до шини: Securely attach the air hose to the tire valve stem.
5. Початок інфляції: Press the start button to begin inflation. The compressor will automatically shut off once the preset pressure is reached.
6. Відключити: Once inflation is complete, disconnect the air hose from the valve stem and store the hose and power cable in their designated compartments.

Використання світлодіодного світильника:

The built-in LED light can be activated by pressing the light button. It offers different modes, including a steady light for illumination and a strobe light for emergency signaling.

Figure 4: The AstroAI H2 Pro demonstrating its built-in LED light, useful for nighttime or low-light conditions.

Універсальні застосування:

The AstroAI H2 Pro is suitable for a wide range of inflation needs:

• Автомобілі: Inflates a flat tire (0 PSI to 36 PSI) in approximately 4 minutes and 30 seconds.
• Мотоцикли: Ideal for maintaining optimal tire pressure.
• Велосипеди: Includes adapters for various bicycle valve types.
• Спортивні м'ячі: Easily inflates basketballs, footballs, and other inflatables with the appropriate nozzle.

Figure 5: The AstroAI H2 Pro shown inflating various items, including car tires, motorcycle tires, bicycle tires, and sports balls.

7. Технічне обслуговування

• Прибирання: Протріть рекламою зовнішню частину надувного пристроюamp тканина. Не використовуйте агресивні хімікати або абразивні засоби для чищення.
• Зберігання: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hose and power cable are neatly stored in the integrated compartments.
• Догляд за акумулятором: If using the battery, charge it regularly, even if not in frequent use, to prolong its lifespan.
• Перевірка шланга: Periodically check the air hose for any signs of wear, cracks, or damage. Replace if necessary.

Figure 6: The AstroAI H2 Pro with its integrated storage compartment open, showing how accessories are neatly organized.

8. Вирішення проблем

9. Технічні характеристики

10. Гарантія та підтримка

The AstroAI H2 Pro Cordless Tire Inflator comes with a Гарантія від виробника 2 рік. For warranty claims, technical support, or any questions regarding your product, please contact AstroAI customer service. You can typically find contact information on the official AstroAI webсайт або через вашу платформу для покупок.

Будь ласка, збережіть чек про покупку для підтвердження гарантії.