Strymon PCH

Strymon PCH Stereo Active Direct Interface User Manual

Model: PCH

вступ

The Strymon PCH is an advanced stereo active direct interface designed for musicians and audio professionals. It provides a transparent signal path for instruments like guitars, keyboards, and synthesizers, allowing direct connection to mixing consoles or recording interfaces. The PCH also features a studio-grade headphone amplifier for personal monitoring and silent practice.

This manual provides detailed instructions for setting up, operating, and maintaining your Strymon PCH to ensure optimal performance and longevity.

Ключові характеристики

  • Advanced Direct Interface: Offers a transparent stereo active direct interface for various instruments.
  • Console-Quality Headphone Ampліфтер: Вбудовані навушники amp for detailed stereo monitoring or silent practice, capable of driving high-impedance headphones.
  • Virtually Unclippable Design: Internal power circuit boosts standard 9V DC to 24V for massive headroom.
  • Flexible Pro Outputs: Supports stereo or dual mono operation with stereo XLR outputs, switchable mic/line level, and ground lift. Stereo Thru outputs include a mono sum ability.
  • Міцна конструкція: Housed in a durable extruded aluminum chassis for silent operation and flat frequency response.

Налаштування

Follow these steps to set up your Strymon PCH:

  1. Підключення живлення: Connect a standard 9V DC power supply (center-negative) to the 9VDC input jack on the PCH. The unit will internally boost this to 24V for optimal performance.
  2. Інструментальний вхід: Connect your instrument (guitar, synth, keyboard, etc.) to the IN (Left/Right) 1/4" input jacks. For mono instruments, use the Left IN jack.
  3. Thru Outputs: Use the THRU (Left/Right) 1/4" jacks to send the input signal to other devices, such as an amplifier or pedalboard. The THRU outputs can be summed to mono using the 'sum stereo' switch if desired.
  4. Виходи XLR: Connect the LEFT OUT and RIGHT OUT XLR jacks to your mixing console, audio interface, or PA system.
  5. Підключення навушників: Plug your headphones into the PHONES 1/4" stereo jack for personal monitoring.
Strymon PCH front and back panel connections

Зображення: Оверview of the Strymon PCH showing input, thru, headphone, and output connections.

Strymon PCH rear panel with input, thru, phones, and power

Image: Close-up of the PCH rear panel, highlighting the IN, THRU, PHONES, and 9VDC power connections.

Операція

Understanding the controls of your PCH is essential for optimal sound routing and monitoring.

  • PHONES Volume Knob: Adjusts the output level for the connected headphones. Rotate clockwise to increase volume, counter-clockwise to decrease.
  • SUM (THRU) Switch: This switch affects the THRU outputs.
    • Коли встановлено 'sum', the Left and Right input signals are summed to mono and sent to both THRU outputs.
    • Коли встановлено 'stereo', the Left input goes to the Left THRU, and the Right input goes to the Right THRU.
  • LEVEL (XLR Outputs) Switch: Located near the XLR outputs, this switch selects the output level for the XLR connections.
    • Установити на 'mic' for connecting to microphone preamps or inputs expecting a mic-level signal.
    • Установити на 'line' for connecting to line-level inputs on mixers or audio interfaces.
  • GROUND (XLR Outputs) Lift Switch: This switch helps eliminate hum and noise caused by ground loops.
    • Установити на 'lift' to disconnect the ground connection between the PCH and the connected device via XLR.
    • Установити на 'gnd' (ground) for a standard ground connection. If you experience hum, try switching to 'lift'.
Strymon PCH XLR outputs with Level and Ground switches

Image: Close-up of the PCH XLR outputs, showing the LEVEL (mic/line) and GROUND (lift/gnd) switches.

Strymon PCH top view showing controls and connections

Зображення: Верх view of the Strymon PCH, illustrating the overall layout of controls and connections.

Технічне обслуговування

The Strymon PCH is designed for durability and requires minimal maintenance.

  • Прибирання: Використовуйте м’яку суху тканину для очищення зовнішньої частини пристрою. Уникайте абразивних засобів для чищення або розчинників.
  • Зберігання: Store the PCH in a dry environment, away from extreme temperatures and direct sunlight.
  • Підключення: Періодично перевіряйте всі кабельні з'єднання на предмет надійності кріплення та ознак зносу.
  • Джерело живлення: Always use a compatible 9V DC (center-negative) power supply. Using an incorrect power supply can damage the unit.

Усунення несправностей

If you encounter issues with your Strymon PCH, refer to the following common troubleshooting steps:

проблемаМожлива причина / рішення
Немає виходу звуку
  • Переконайтеся, що блок живлення підключено правильно та справно.
  • Check all input and output cables for secure connections.
  • Verify the PHONES volume knob is turned up.
  • Confirm the LEVEL switch for XLR outputs is set appropriately (mic/line) for the receiving device.
Гудіння або дзижчання
  • Engage the GROUND LIFT switch to 'lift'.
  • Check for faulty cables or improper grounding in your audio chain.
  • Ensure the power supply is not introducing noise.
Low Headphone Volume
  • Increase the PHONES volume knob.
  • Ensure your headphones are properly connected and functioning.
  • The PCH headphone amp is powerful, but extremely high-impedance headphones might require maximum volume.
Спотворений звук
  • Reduce the input level from your instrument if it's excessively hot.
  • Ensure the receiving device (mixer, interface) is not being overdriven.
  • While the PCH is designed to be unclippable, extreme input levels can still cause issues further down the signal chain.

Технічні характеристики

ОсобливістьДеталь
Номер моделіPCH
Вага товару1.2 фунта (0.54 кг)
Розміри продукту4.88 дюйма x 2.97 дюйма x 1.94 дюйма (12.4 x 7.5 x 4.9 см)
Технологія підключенняXLR, 1/4" TRS
Кількість каналів4 (Stereo In, Stereo Thru, Stereo Out)
Сумісні пристроїGuitar, Keyboard, Synthesizer, Pedalboards, Personal Computer, Portable Media Player, Speaker
Тип матеріалуЕкструдований алюміній
Вимоги до живлення9V DC (center-negative)
Внутрішній робочий випtage24V (internally boosted)

Гарантія та підтримка

For warranty information and technical support, please refer to the official Strymon webсайт або зверніться безпосередньо до служби підтримки клієнтів. Зберігайте чек про покупку для гарантійних випадків.

Strymon Official Webсайт: www.strymon.net

© 2026 Strymon. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.