tectake 404962-1

tectake Clamp Awning Instruction Manual

модель: 404962-1 | Size: 250 х 180 см | Color: Чорний/Сірий

For Balconies and Terraces

1. Вступ та інформація з техніки безпеки

Thank you for choosing the tectake Clamp Awning. This manual provides essential instructions for the safe and efficient assembly, operation, and maintenance of your awning. Please read it thoroughly before installation and keep it for future reference.

1.1 Важливі застереження щодо безпеки

  • Надійне кріплення: Ensure the awning is securely anchored to prevent detachment during adverse weather conditions. Failure to do so may result in injury or damage.
  • Погодні умови: Exercise extreme caution when using the awning in windy or rainy conditions. Retract the awning during strong winds, heavy rain, or snow to prevent damage.
  • Збірка: Assembly should ideally be performed by two adults. Follow all steps carefully.
  • Діти та домашні тварини: Тримайте дітей та домашніх тварин подалі від тенту під час складання та експлуатації.
  • Огляд: Regularly inspect all components for wear, damage, or loose connections. Do not use the awning if any parts are damaged.

1.2 Вміст упаковки

Перед початком складання перевірте наявність усіх компонентів:

  • Awning Fabric (1)
  • Вертикальні опорні стовпи (2)
  • Horizontal Support Arms (2)
  • Crank Handle (1)
  • Mounting Hardware (screws, clamps, footpads)
  • Інструкція з експлуатації (1)

2. Налаштування та встановлення

The tectake Clamp Awning is designed for quick and easy installation without the need for drilling. Follow these steps for a secure setup.

2.1 Підготовка до встановлення

  • Choose a suitable location on your balcony or terrace with a stable ceiling and floor.
  • Ensure the installation area has a minimum clearance height of 211 cm and a maximum of 304 cm.
  • Unpack all components and lay them out to ensure nothing is missing.

2.2 Етапи складання

  1. Assemble the Vertical Support Poles: Connect the pole sections as per the diagram. The telescopic design allows for height adjustment.
  2. Прикріпіть накладки на ноги: Secure the plastic footpads to the bottom of the vertical poles. These provide stability and prevent slipping.
  3. Mount the Awning Fabric: Carefully attach the awning fabric to the main horizontal bar and the support arms. Ensure the fabric is correctly oriented.
  4. Розташування тенту: Place the assembled awning in the desired location. Extend the vertical poles using the telescopic mechanism until they firmly clamp between the floor and ceiling. Adjust the height using the screw feet for maximum stability.
  5. Attach the Crank Mechanism: Install the crank handle mechanism to the designated side of the awning frame. It can be mounted on either side for convenience.
Awning installation diagram showing clamp механізм
Рисунок 1: Ілюстрація clamp mechanism for quick and easy installation without drilling.
Awning clamp mechanism detail
Рисунок 2: Деталь надійного clamp mechanism ensuring secure placement.

3. Інструкція з експлуатації

Your tectake Clamp Awning offers adjustable shade and privacy with simple manual operation.

3.1 Розкладання та складання тенту

  • Insert the crank handle into the designated loop on the awning mechanism.
  • Поверніть кривошипну рукоятку за годинниковою стрілкою, щоб розсунути тканину тенту.
  • Turn the crank handle counter-clockwise to retract the awning fabric.
  • Extend or retract the awning to your desired projection, up to 250 cm.

3.2 Регулювання кута нахилу

The awning's inclination can be adjusted to provide optimal shade throughout the day.

  • Locate the tilt adjustment mechanism on the support arms.
  • Loosen the adjustment knobs or levers.
  • Adjust the angle of the awning from diagonal to completely vertical, as needed.
  • Tighten the adjustment knobs or levers to secure the desired tilt angle.
Awning features showing crank and tilt adjustment
Figure 3: Demonstration of the crank handle for extending and retracting the awning, and adjusting its angle.
Awning crank handle in use
Figure 4: Close-up of the practical crank handle for easy operation.

4. Технічне обслуговування

Proper maintenance will extend the lifespan of your tectake Clamp Тент.

4.1 Чищення тканини

  • The awning fabric is made of 100% polyester, which is waterproof and UV resistant.
  • Clean the fabric regularly with a soft brush or cloth to remove loose dirt and debris.
  • For stubborn stains, use a mild soap solution and lukewarm water. Rinse thoroughly with clean water and allow to air dry completely before retracting.
  • Do not use harsh chemicals, abrasive cleaners, or high-pressure washers, as these can damage the fabric's protective coating.

4.2 Догляд за каркасом

  • The frame is constructed from powder-coated steel and aluminum. Wipe down the frame periodically with a damp cloth to remove dirt and prevent corrosion.
  • Check all screws and connections regularly and tighten if necessary.

4.3 Сезонне зберігання

If you plan to store the awning for an extended period, especially during winter or severe weather:

  • Ensure the fabric is completely clean and dry to prevent mold and mildew.
  • Retract the awning fully.
  • If possible, disassemble and store in a dry, protected area.
Awning resistant to wind and weather
Figure 5: The awning's durable fabric and frame are designed to withstand various weather conditions.

5. Вирішення проблем

Ось рішення поширених проблем, з якими ви можете зіткнутися:

5.1 Awning Not Extending/Retracting Smoothly

  • Перевірте наявність перешкод: Ensure there are no objects blocking the awning's path or interfering with the crank mechanism.
  • Inspect Crank Handle: Verify the crank handle is properly inserted and not damaged.
  • Змащення: If the mechanism feels stiff, apply a silicone-based lubricant to moving parts (avoiding fabric).

5.2 Awning Feels Unstable

  • Re-adjust Poles: Ensure the vertical support poles are fully extended and firmly clamped between the floor and ceiling. Tighten the screw feet for maximum tension.
  • Перевірте поверхню: Verify that the floor and ceiling surfaces are flat and sturdy enough to support the awning.
  • Погодні умови: Retract the awning immediately during strong winds. This awning is not designed for extreme weather.

5.3 Water Accumulation on Fabric

  • Налаштування нахилу: Increase the tilt angle of the awning to allow water to run off more effectively.
  • Fabric Tension: Ensure the fabric is taut when extended to prevent sagging.

6. Технічні характеристики

ОсобливістьСпецифікація
Номер моделі404962-1
Total Dimensions (W x P x H)250 х 120 х 211-304 см
Closed Dimensions (W x P x H)250 х 12 х 211-304 см
Зона покриття237 х 180 см
Довжина руки120 см
Footpad Diameter7 см
УФ-захистУФ 50+
Fabric Thickness180 г/м²
вагаприбл. 8.5 кг
МатеріалиPowder-coated steel, aluminum, 100% polyester, polyethylene, polyurethane
Режим роботиРучний (шатунний)
Потрібна збіркатак
Мінімальна висота кліренсу211 см
Максимальна відстань проекції250 см
Awning technical data and dimensions diagram
Figure 6: Detailed diagram showing the dimensions and technical specifications of the awning.

7. Гарантія та підтримка

tectake products are manufactured with quality and durability in mind. While specific warranty details may vary by region and retailer, we recommend retaining your proof of purchase.

For any questions, missing parts, or support needs, please contact your retailer or the tectake customer service directly. Contact information can usually be found on the product packaging or the retailer's webсайт.

Будь ласка, вкажіть номер вашої моделі (404962-1) and purchase date ready when contacting support.

© 2026 tectake. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.