Andeman EP-177
Пускова установка Andeman 4000A з повітряним компресором 150 PSI, модель EP-177, інструкція користувача
Comprehensive instructions for operating and maintaining your Andeman EP-177 device.
1. Вступ
This manual provides essential information for the safe and effective use of your Andeman EP-177 4000A Jump Starter with 150PSI Air Compressor. Please read all instructions carefully before operation and retain this manual for future reference.

Image 1.1: Andeman EP-177 Jump Starter with Air Compressor and included accessories.
2. Що в коробці
Перевірте наявність усіх компонентів в упаковці:
- Epower-177 Jump Starter x1
- Gas Needle x1
- Gas Nozzle x2
- Посібник користувача x1
- Jumper Cable x1
- Inflatable Tube x1
- Сумка для зберігання x1
- Зарядний кабель x1

Image 2.1: All items included in the Andeman EP-177 product package.
3. Особливості продукту
The Andeman EP-177 combines multiple functionalities for automotive and portable power needs:
- Пускова установка на 4000A: Capable of starting 12V vehicles with up to 8.5L gas or 7L diesel engines.
- 150PSI Air Compressor: Integrated portable inflator for tires, sports equipment, and other inflatables.
- Зовнішній акумулятор 24000 мАг: High-capacity battery with Type-C Quick Charge and USB-A/USB-B outputs for charging electronic devices.
- Multi-Mode LED Light: Features standard illumination, SOS, and alert modes for various situations.
- 10 Safety Protections: Advanced safety features including overload, spark, reverse polarity, and over-temperature protection.

Image 3.1: The Andeman EP-177 functioning as both a jump starter and a tire inflator.
4. Технічні характеристики
| Особливість | Специфікація |
|---|---|
| Бренд | Андеман |
| Модель | Epower-177 |
| Піковий вихідний струм | 4000 Amps |
| Ємність акумулятора | 24000 мАг |
| Сумісність двигуна | До 8.5 л бензину / 7 л дизельного палива |
| Тиск повітряного компресора | Up to 150PSI |
| Charging Input (Type-C) | 5V/3A, 9V/2A, 12V/1.5A |
| Вихід USB-A | QC3.0 |
| Вихід USB-B | 5В/3А |
| Вихід постійного струму | 15 В |
| Розміри продукту | 1.97" Г x 4.33" Ш x 7.68" В |
| Вага товару | 2.86 фунта |
| Тип батареї | Літій-іонний |
5. Налаштування
5.1 Початкове заряджання
Before first use, fully charge the Andeman EP-177. Connect the provided charging cable to the Type-C input port on the device and to a suitable USB power adapter (not included). The device supports fast charging, reaching full capacity in approximately 1.8 hours. A 10-minute charge can provide enough power for an emergency jump start.

Image 5.1: Charging the Andeman EP-177 via its Type-C port.
5.2 Перевірка рівня заряду батареї
The device features a digital display indicating the battery power percentage. Ensure the device is adequately charged before use, especially for jump-starting vehicles.
6. Інструкція з експлуатації
6.1 Запуск автомобіля з стрибка
- Крок 1: Insert the jumper cable into the jump starter's port. Ensure a secure connection.
- Крок 2: Підключіть червоний клamp to the vehicle's positive (+) battery terminal and the black clamp до негативної (-) клеми акумуляторної батареї автомобіля.
- Крок 3: Once the green indicator light on the jumper cable connector illuminates, start the vehicle.
- Крок 4: Після того, як автомобіль заведеться, зніміть перемичку клamps from the vehicle battery within 30 seconds, then disconnect the cable from the jump starter.

Image 6.1: Step-by-step guide for jump starting a vehicle.
6.2 Використання повітряного компресора
- Крок 1: Press and hold the power button for 2 seconds to turn on the device. Short press to switch between on/pause.
- Крок 2: Choose the appropriate nozzle/needle and connect it to the inflatable tube, then attach to the item to be inflated.
- Крок 3: Short press the mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Use the "+" or "-" buttons to adjust the target pressure.
- Крок 4: Start inflation by short pressing the power button. The pump will stop automatically at the set pressure or when paused manually.
Примітка: For continuous use, allow the compressor to rest for 10 minutes after every 10 minutes of operation to prevent overheating.

Image 6.2: The Andeman EP-177 functioning as a tire inflator.
6.3 Використання як портативного зарядного пристрою
The device can charge various electronic devices via its USB-A (QC3.0), USB-B (5V/3A), and Type-C (5V/3A, 9V/2A, 12V/1.5A) output ports. Connect your device using a compatible charging cable.

Image 6.3: The Andeman EP-177 used as a power bank to charge various devices.
6.4 Використання світлодіодного ліхтарика
The integrated LED light offers three modes:
- Standard Lighting: Забезпечує безперервне освітлення.
- Режим SOS: Подає сигнал SOS у разі надзвичайних ситуацій.
- Режим оповіщення: Flashing light for increased visibility.
To activate or cycle through modes, press the dedicated flashlight button on the device.

Image 6.4: The Andeman EP-177's LED flashlight in use.
7. Заходи безпеки
Дотримуйтесь наступних правил безпеки, щоб запобігти травмуванню або пошкодженню пристрою:
- Do not short-circuit the jump starter terminals.
- Не піддавайте пристрій впливу екстремальних температур (нижче -20°C або вище 60°C).
- Не розбирайте пристрій.
- Зберігати в недоступному для дітей місці.
- Ensure proper polarity when connecting to a vehicle battery (red to positive, black to negative).
- Remove jumper cables within 30 seconds after the vehicle starts.
- Avoid prolonged continuous use of the air compressor to prevent overheating.

Зображення 7.1: закінченоview of the 10 safety protections.
8. Технічне обслуговування
- Зберігайте пристрій у прохолодному сухому місці подалі від прямих сонячних променів.
- Charge the device at least once every 3-6 months to maintain battery health, even if not in use.
- Очистіть зовнішню поверхню м'якою, damp тканина. Не використовуйте агресивні хімікати або абразивні засоби для чищення.
- Переконайтеся, що всі порти чисті від пилу та сміття.
9. Вирішення проблем
- Пристрій не вмикається:
- Ensure the device is charged. Connect it to a power source and allow it to charge for a period.
- Автомобіль не заводиться після запуску від сторонніх кнопок:
- Check battery connections for proper polarity and secure contact. Ensure the jump starter has sufficient charge. The vehicle battery may be severely damaged or the vehicle may have other mechanical issues.
- Air compressor is not inflating:
- Verify that the nozzle is correctly attached and the target pressure is set. Check the device's battery level. Ensure the power button has been pressed to start inflation.
- Device is overheating:
- Stop operation immediately and allow the device to cool down. This is particularly important for the air compressor after extended use.
10. Гарантія та підтримка
For warranty information and customer support, please refer to the contact details provided in your product packaging or visit the official Andeman webсайт. Зберігайте чек про покупку як підтвердження покупки для гарантійних претензій.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.