Sper Scientific 850015

Інструкція користувача графічного шумоміра Sper Scientific 850015

Модель: 850015

1. Вступ

This manual provides comprehensive instructions for the operation and maintenance of the Sper Scientific 850015 Graphic Display Sound Meter. This precision instrument is designed for accurate sound level measurements and complies with industry standards ANSI S1.4 Type 2 and IEC 61672-1 Class 2.

The device features a clear graphic display, selectable A and C decibel frequency weighting scales, minimum/maximum value tracking, and adjustable fast or slow response times. It also includes AC and DC output capabilities for external recording or analysis.

Sper Scientific 850015 Graphic Display Sound Meter

Figure 1: Sper Scientific 850015 Graphic Display Sound Meter. This image shows the front view of the sound meter, highlighting its display and control buttons.

2. Вміст упаковки

Після відкриття упаковки переконайтеся, що всі перелічені нижче предмети присутні та знаходяться у належному стані:

  • Sper Scientific 850015 Graphic Display Sound Meter
  • лобове скло
  • Акумулятор 9В
  • Інструкція з експлуатації (цей документ)
  • Foam-lined Hard Shell Carrying Case
Sper Scientific 850015 Sound Meter in carrying case with accessories

Figure 2: The Sper Scientific 850015 Sound Meter shown within its protective foam-lined hard shell carrying case, alongside the included 9V battery and instruction manual.

3. Налаштування та встановлення батареї

The Sper Scientific 850015 comes with a 9V battery included. Follow these steps to install or replace the battery:

  1. Знайдіть кришку відсіку для батареї на задній панелі пристрою.
  2. Зсуньте або відкріпіть кришку, щоб відкрити відсік.
  3. Підключіть батарейку 9 В до затискача батареї, дотримуючись правильної полярності.
  4. Place the battery into the compartment and replace the cover, securing it firmly.
  5. Attach the windscreen to the microphone at the top of the meter. This helps reduce wind noise during measurements.

4. Інструкція з експлуатації

Familiarize yourself with the device's controls and display before operation.

Sper Scientific 850015 Sound Meter held in hand

Figure 3: The Sper Scientific 850015 Sound Meter being held, demonstrating its ergonomic design and ease of use.

4.1. Увімкнення/вимкнення живлення

  • Натисніть потужність button (usually marked with "I" or a power symbol) to turn the meter on.
  • Натисніть і утримуйте потужність кнопку протягом кількох секунд, щоб вимкнути глюкометр.
  • The meter features an auto-power-off function to conserve battery life.

4.2. A/C Weighting Selection

  • Натисніть кондиціонер button to toggle between A-weighting and C-weighting.
  • А-зважування (dBA) is commonly used for environmental noise measurements and approximates the human ear's response.
  • С-зважування (dBC) provides a flatter response, suitable for measuring peak sound levels or noise from machinery.

4.3. Fast/Slow Response Time

  • Натисніть ШВИДКО ПОВІЛЬНО button to select the desired response time.
  • ШВИДКИЙ response (125 ms) is suitable for capturing rapidly changing noise levels.
  • ПОВІЛЬНИЙ response (1 second) provides an averaged reading for more stable noise sources.

4.4. MIN/MAX Function

  • Натисніть ХВІЛЬ / МАКС button to activate the minimum/maximum hold function.
  • The display will show the highest (MAX) or lowest (MIN) sound level recorded since the function was activated.
  • Press the button again to cycle through MAX, MIN, and normal measurement modes.

4.5. Вихід змінного/постійного струму

The meter provides AC and DC output jacks for connecting to external devices such as chart recorders, data loggers, or sound analysis equipment. Refer to the specifications section for output voltagе деталі.

5. Технічне обслуговування та калібрування

5.1. прибирання

To ensure optimal performance and longevity, keep the meter clean. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the microphone is free from dust and debris.

5.2. Заміна батареї

When the low battery indicator appears on the display, replace the 9V battery as described in the "Setup and Battery Installation" section. Always dispose of used batteries responsibly.

5.3. Калібрування

For applications requiring high accuracy or regulatory compliance, periodic calibration is recommended. The Sper Scientific 850015 can be calibrated in compliance with OSHA standards using an optional Acoustical Calibrator (Model 850016). A N.I.S.T. traceable certificate of calibration is also available from Sper Scientific.

6. Вирішення проблем

If you encounter issues with your Sper Scientific 850015, refer to the following common problems and solutions:

проблемаМожлива причинаРішення
Пристрій не включається.Розряджений або неправильно встановлений акумулятор.Check battery installation; replace with a fresh 9V battery.
Неточні або коливаючі показники.Microphone obstructed, strong wind, or meter needs calibration.Ensure windscreen is properly installed and microphone is clear. Avoid strong air currents. Consider calibration if readings remain inconsistent.
Display shows "LO BAT".Батарея розряджена.Негайно замініть батарейку 9 В.
Немає реакції на кнопки.Device frozen or battery issue.Remove and reinsert the battery to reset the device. If problem persists, replace battery.

7. Технічні характеристики

The following table details the technical specifications for the Sper Scientific 850015 Graphic Display Sound Meter:

ПараметрЗначення
Діапазон вимірювання30 to 130 dB (A & C scales)
роздільна здатність0.1 дБ
Точність±1.4 dB (ref 94 dB @ 1KHz)
Частотне зважуванняА і С
Час відгукуFast (125 ms) / Slow (1 sec)
ВихідЗмінний і постійний струм
Автоматичне вимкненнятак
Індикатор низького заряду батареїтак
Відповідність стандартамANSI S1.4 Type 2, IEC 61672-1 Class 2
Розміри10¼" × 2¼" × 1" (258 × 55 × 25 mm)
вага6.5 унції (185 г)
Джерело живлення1 батарея 9 В (в комплекті)
Specifications table for Sper Scientific 850015

Figure 4: A visual representation of key specifications for the Sper Scientific 850015, including range, resolution, and accuracy.

8. Гарантія та підтримка

For information regarding product warranty, technical support, or service, please contact Sper Scientific directly. Their official website or the contact information provided with your purchase documentation will have the most up-to-date details.

Виробник: Sper Scientific
Webсайт: Магазин Sper Scientific на Amazon (загальна інформація про продукт)

© 2025 Sper Scientific. Усі права захищено.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.