WEIZE 11000 lbs 2 Post Automotive Lift Instruction Manual

1. Продукт закінчивсяview

The WEIZE 11000 lbs 2 Post Automotive Lift is engineered for professional use, offering a robust lifting capacity suitable for a wide range of vehicles, from compact cars to light-duty trucks and SUVs. Its design prioritizes safety and efficiency in garage and workshop environments.

• Важка конструкція: Engineered for professional use, this 2-post car lift boasts a robust 11,000 lbs. lifting capacity.
• Універсальні застосування: Suitable for servicing a wide range of vehicles, from compact cars to light-duty trucks and SUVs.
• Гідроагрегат: Features a 220V 60Hz 1 Phase 3 HP Hydraulic Power Unit for enhanced safety and efficiency.
• Функції безпеки: Equipped with a double point safety lock release mechanism.
• Компактний дизайн: The 2-post configuration maximizes workspace while minimizing the overall footprint in your garage or shop.

2. Техніка безпеки

Always prioritize safety when operating the automotive lift. Failure to follow these instructions may result in serious injury or death.

• Read and understand the entire manual before installation and operation.
• Переконайтеся, що підйомник встановлено на рівному, міцному бетонному фундаменті, здатному витримати вагу підйомника та максимальне навантаження.
• Only trained and authorized personnel should operate the lift.
• Never exceed the maximum rated lifting capacity of 11,000 lbs.
• Always ensure the safety locks are engaged before working under a vehicle.
• Тримайте руки та ноги подалі від рухомих частин під час роботи.
• Ensure proper vehicle positioning on the lift arms and use appropriate adapters.
• Regularly inspect the lift for any signs of wear, damage, or malfunction.
• Тримайте робочу зону чистою та вільною від перешкод.

3. Компоненти продукту

The WEIZE 11000 lbs 2 Post Automotive Lift includes the following main components:

• Two Post Lift Assembly
• Power Unit (220V 3HP)
• Lifting Arms (2-stagе і 3-сtage)
• Height Extension Holders
• Height Extensions
• Pick-up Adapters
• масляний шланг
• Floor Plate & Floor Plate Cover
• Safety Brake Cable & Control Handle
• Main Column Brake Cable Switch Cover & Side Column Brake Cable Switch Cover

Image: Detailed breakdown of all components included with the WEIZE 11000 lbs 2 Post Car Lift.

4. Налаштування та встановлення

Proper installation is crucial for the safe and efficient operation of your WEIZE automotive lift. Refer to the detailed video guide below for step-by-step instructions.

Основні кроки встановлення:

1. Розпакування та перевірка: Carefully unpackage all components. Inspect for any damage or missing parts.
2. Column Placement: Position the columns accurately according to the provided dimensions. Ensure proper spacing and alignment.
3. Анкерування: Securely anchor the columns to the concrete floor using the provided expansion bolts. Ensure bolts are tightened to the specified torque.
4. Прокладка кабелю: Route the steel cables through the pulleys and mechanisms as shown in the video, paying close attention to the threading direction.
5. Гідравлічні з'єднання: Connect the hydraulic hoses between the power unit and the cylinders. Ensure all connections are tight and free of leaks.
6. Встановлення силового агрегату: Mount the power unit to the main column and connect the electrical wiring (Live, Neutral, Ground).
7. Гідравлічна рідина: Fill the power unit reservoir with the recommended hydraulic oil, ensuring not to exceed the maximum level mark.
8. Установка кронштейна: Install the lifting arms, ensuring correct orientation (2-stage arms for the rear, 3-stage arms for the front).
9. Механізм блокування безпеки: Install and adjust the safety lock release mechanism and associated cables.
10. Тестовий запуск: Perform a test run without a vehicle to ensure all components function correctly and safety locks engage properly.

5. Інструкція з експлуатації

Follow these steps for safe and effective operation of your automotive lift.

1. Vehicle Positioning: Drive the vehicle onto the lift, ensuring it is centered between the columns. Position the lifting arms under the vehicle's designated lifting points. Use height adjustment pads and truck adapters as needed.
2. Підйом: Press and hold the UP button on the power unit. The lift will raise. Listen for a "click" sound, indicating the safety device is locked into place.
3. Увімкніть запобіжні замки: Once the vehicle is at the desired height, lower the lift slightly until the safety locks engage. Never work under a vehicle unless the safety locks are fully engaged.
4. Зниження: First, slightly raise the platform by 5 cm to disengage the safety locks. Then, press the safety release handle and simultaneously press the pressure relief handle to complete the descent.

Image: A black sedan safely lifted by the WEIZE 11000 lbs 2 Post Automotive Lift, demonstrating proper vehicle positioning.

6. Інструкції з обслуговування та догляду

Regular maintenance ensures the longevity and safe operation of your lift.

• Щоденне використання: Check daily if the safety device can lock into place and if the linkage is functioning properly. If there are any potential hazards, repair or replace them promptly.
• Щотижнева перевірка: Inspect the steel wire for looseness or broken strands. Observe the sliding blocks on the internal platform of the columns and apply grease as needed. If wear on one side exceeds 20%, it will no longer be securely gripped by the columns and should be replaced in a timely manner.
• Bi-Weekly Check: Inspect all hydraulic hose connections for leaks or ruptures, and repair or replace them as necessary.
• Щомісячне технічне обслуговування: Check if all screws and nuts are tightened properly. After a test run, retighten all screws and nuts.

7. Вирішення проблем

If you encounter issues with your lift, refer to the following common problems and solutions:

• Ліфт не піднімається: Check power supply, hydraulic fluid level, and motor functionality. Ensure all electrical connections are secure.
• Lift lowers unevenly: Inspect hydraulic lines for leaks, check cable tension, and ensure safety locks are disengaging properly on both sides.
• Незвичайні шуми під час роботи: Check for loose components, worn pulleys, or insufficient lubrication.
• Hydraulic fluid leaks: Inspect all hose connections, seals, and cylinders for damage. Tighten connections or replace faulty components.
• Safety locks not engaging: Check the safety lock mechanism for obstructions or damage. Ensure cables are properly adjusted.

8. Технічні характеристики

9. Гарантія та підтримка

For warranty information, technical support, or to purchase replacement parts, please contact WEIZE Customer Support. Refer to your purchase documentation for specific warranty terms and contact details.

Ви також можете відвідати Магазин WEIZE на Amazon для отримання додаткової інформації про продукт та ресурсів підтримки.