Saooer 30A

Saooer Solar Charge Controller 12V/24V 30A User Manual

Модель: 30A

Brand: Saooer

1. Вступ

This manual provides essential instructions for the safe and efficient operation of your Saooer Solar Charge Controller. This device is designed to manage the power flow from your solar panel to your battery, ensuring optimal charging and protecting your battery from overcharge and over-discharge. It is compatible with both 12V and 24V solar systems and features a 30A discharge current capacity.

2. Техніка безпеки

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the controller, battery, or other components, and may cause personal injury.

  • Переконайтеся, що об’єм акумулятораtage is sufficient for the controller to recognize the battery type before the first installation.
  • The charge controller is suitable for lead-acid batteries (OPEN, AGM, GEL) and lithium-ion batteries. Do not use it for other battery types.
  • Install the charge controller indoors, away from direct sunlight, high temperatures, and humid environments.
  • Контролер нагрівається під час роботи; забезпечте хорошу вентиляцію.
  • The controller's positive and negative terminals should be connected correctly. Reverse connection may damage the device.
  • Завжди спочатку підключайте акумулятор, потім сонячну панель, і тільки потім навантаження. Від’єднуйте у зворотному порядку: навантаження, потім сонячна панель, потім акумулятор.

3. Особливості продукту

  • System Voltage Сумісність: Automatically detects 12V or 24V systems.
  • Струм розряду: Ємність 30А.
  • Integrated Micro Controller: Manages solar panel and battery operation efficiently.
  • Подвійні порти USB: Supports mobile phone charging (5V/2A output).
  • Комплексний захист: Includes short-circuit protection, open-circuit protection, reverse polarity protection, and over-load protection to enhance system efficiency and battery lifespan.
  • РК-дисплей: Provides clear indication of status and data, allowing for convenient mode switching and parameter configuration.
  • Регульовані параметри: User-configurable settings for various battery types and operational needs.
  • Вбудований таймер: For load control.

4. Вміст упаковки

  • 1x Saooer Solar Charge Controller (30A)

5. Налаштування та встановлення

Follow these steps for proper installation of the solar charge controller. Incorrect connection order can damage the controller.

  1. Підключіть батарею: Connect the battery to the charge regulator first. Ensure correct polarity (positive to positive, negative to negative). This allows the controller to recognize the battery voltage.
  2. Підключіть сонячну панель: Connect the solar panel to the solar charge controller. Ensure correct polarity.
  3. Підключіть навантаження: Connect the consumer or load to the charge controller regulator. Ensure correct polarity.

Important Disconnection Note:

When disconnecting the system, always remove the solar panel connection first, then the load connection, and finally the battery connection. This prevents potential damage to the controller.

Saooer Solar Charge Controller front view with LCD display and connection terminals
Малюнок 1: Спереду view of the Saooer Solar Charge Controller, showing the LCD display, control buttons, USB ports, and connection terminals.
Diagram showing the connection points for battery, solar panel, and load on the solar charge controller
Figure 2: Illustrative diagram of the solar charge controller's connection points for the battery, solar panel, and electrical load.

6. Інструкція з експлуатації

Контролер оснащений РК-дисплеєм та трьома кнопками для керування: МЕНЮ, UP, і ВНИЗ.

6.1. РК-дисплей

The LCD display shows real-time system status and data, including battery voltage, charging current, discharging current, and various parameter settings.

6.2. Функції кнопок

  • Кнопка МЕНЮ: Press to cycle through different display modes and enter parameter setting mode. Long press to exit setting mode.
  • Кнопка ВВЕРХ: In setting mode, press to increase the parameter value.
  • Кнопка ВНИЗ: In setting mode, press to decrease the parameter value.

6.3. Параметри параметрів

To adjust parameters (e.g., battery type, charge/discharge voltage limits, load timer settings):

  1. Натисніть МЕНЮ button until the desired parameter display appears.
  2. Тривале натискання МЕНЮ button until the displayed value starts flashing.
  3. Використовуйте UP і ВНИЗ кнопки для налаштування значення.
  4. Once the desired value is set, long press the МЕНЮ button again to save the setting and exit the flashing state.

Refer to the specific icons on the LCD for detailed parameter identification.

Крупним планом view of the Saooer Solar Charge Controller's LCD screen and control buttons
Figure 3: Close-up of the controller's LCD display and control buttons for parameter adjustment.

7. Технічне обслуговування

Регулярне технічне обслуговування забезпечує довговічність та оптимальну роботу вашого контролера сонячного заряду.

  • Чистота: Тримайте контролер чистим та без пилу та сміття. Використовуйте суху тканину для очищення.
  • Підключення: Periodically check all wiring connections to ensure they are tight and free from corrosion. Loose connections can cause power loss and overheating.
  • Вентиляція: Ensure the installation area has adequate ventilation to prevent overheating of the controller.
  • Огляд: Inspect the controller for any signs of physical damage or unusual operation.

8. Вирішення проблем

If you encounter issues with your solar charge controller, consider the following common troubleshooting steps:

  • Немає дисплея/немає живлення: Перевірте з'єднання акумулятора та переконайтеся, що акумулятор має достатній рівень зарядуtage. Verify all wiring is correct and secure.
  • Акумулятор не заряджається: Check solar panel connections and ensure the panel is receiving adequate sunlight. Verify solar panel voltage and current. Ensure the controller's charging parameters are correctly set for your battery type.
  • Навантаження не працює: Check load connections. Ensure the load is not exceeding the controller's rated current. Check the load timer settings if applicable. The controller may have entered protection mode due to over-discharge or over-load; check the display for error codes or indicators.
  • Over-Voltage/Under-Voltage Сигналізація: Перевірте об'єм батареїtage. Ensure solar panel open-circuit voltage does not exceed the controller's maximum input voltage.

Якщо проблема не зникає після виконання цих перевірок, зверніться до служби підтримки клієнтів.

9. Технічні характеристики

ОсобливістьСпецифікація
БрендSaooer
МодельКонтролер сонячного заряду 30A
System Voltage12 В / 24 В з автоматичним визначенням
Струм розряду30А
матеріалМетал, пластик
Тип дисплеяЖК
Вихід USBDual USB, 5V/2A
Включені компоненти1x Solar Charge Controller
З верху до низу view of the Saooer Solar Charge Controller, highlighting its compact design
Рисунок 4: Зверху вниз view of the solar charge controller, showing its overall dimensions and layout.
Дно view of the Saooer Solar Charge Controller, showing mounting holes
Малюнок 5: Нижня частина view of the solar charge controller, illustrating the mounting holes for installation.

10. Гарантія та підтримка

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or inquiries, please contact Saooer customer service through their official channels.

© 2023 Saooer. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.