DREAME Robot Vacuum and Mop Accessories Kit User Manual

1. Продукт закінчивсяview

This accessories kit provides essential replacement parts and cleaning supplies for your DREAME X50 Ultra or L50 Ultra Robot Vacuum and Mop. Regular replacement and maintenance of these components ensure optimal performance and longevity of your robot vacuum.

Включені компоненти:

• Роликова щітка: 1 одиниця
• Бічна щітка: 2 одиниць
• Ящик для пилу: 2 одиниць
• Мішок для пилу: 2 одиниць
• Розчин для очищення: 1 пляшка
• Килимок для швабри: 6 одиниць

Зображення 1.1: закінченоview of the DREAME Robot Vacuum and Mop Accessories Kit, displaying the roller brush, two side brushes, two dust boxes, two dust bags, one bottle of multi-surface floor cleaner, and six mop pads.

2. Налаштування та встановлення

Ensure your robot vacuum is powered off and unplugged before installing or replacing any accessories.

2.1. Roller Brush Installation

1. Flip the robot vacuum over to access the main brush compartment.
2. Press the release tabs on the brush guard to remove it.
3. Remove the old roller brush.
4. Insert the new roller brush, ensuring the square end aligns with the square slot and the round end fits into the bearing.
5. Reattach the brush guard until it clicks into place.

2.2. Встановлення бічної щітки

1. Переверніть робот-пилосос.
2. Locate the side brush screws (if applicable) or simply pull off the old side brush.
3. Align the new side brush with the corresponding post and press down firmly until it clicks into place, or secure with screws if necessary.

2.3. Dust Box and Dust Bag Installation

1. Open the top cover of the robot vacuum to access the dust box compartment.
2. Remove the old dust box.
3. If replacing the dust bag in the auto-empty station, open the station's dust bag compartment and replace the full bag with a new one.
4. Insert the new dust box into the robot vacuum, ensuring it is seated correctly.
5. Закрийте верхню кришку.

2.4. Cleaning Solution Usage

1. Refer to your robot vacuum's main manual for specific instructions on filling the water tank or cleaning solution compartment.
2. Pour the DREAME Multi-Surface Floor Cleaner into the designated solution tank according to the recommended dilution ratio (if any) or directly if designed for concentrated use.
3. Do not use other cleaning solutions not specified by DREAME, as this may damage the robot or void the warranty.

2.5. Mop Pad Attachment

1. Locate the mop pad attachment area on the underside of the robot vacuum or the dedicated mopping module.
2. Align the mop pad with the hook-and-loop fasteners or clips.
3. Press firmly to secure the mop pad in place. Ensure it is flat and evenly attached for effective mopping.

3. Operating with Accessories

Once accessories are installed, your DREAME robot vacuum is ready for operation. The accessories work in conjunction with the robot's cleaning modes.

3.1. Vacuuming Operation

The roller brush and side brushes are essential for effective vacuuming. The side brushes sweep debris into the path of the main roller brush, which then lifts dirt into the dust box. Ensure these brushes are clean and free of tangles for optimal dirt pickup.

3.2. Mopping Operation

When the mop pads are attached and the cleaning solution tank is filled, the robot can perform wet mopping. The mop pads absorb and distribute the cleaning solution, wiping the floor clean. For best results, pre-sweep or vacuum heavily soiled areas before mopping.

4. Технічне обслуговування та заміна

Regular cleaning and timely replacement of accessories are crucial for maintaining the robot vacuum's performance and preventing damage.

4.1. Технічне обслуговування роликової щітки

• Прибирання: Remove hair and debris tangled around the brush and its ends regularly (e.g., weekly). Use the cleaning tool provided with your robot vacuum.
• Заміна: Replace every 6-12 months, or sooner if visibly worn or damaged.

4.2. Side Brush Maintenance

• Прибирання: Remove any hair or debris wrapped around the brushes. Wipe the brushes clean with a damp тканина.
• Заміна: Replace every 3-6 months, or if bristles are bent or missing.

4.3. Dust Box and Dust Bag Maintenance

• Dust Box Cleaning: Empty the dust box after each cleaning cycle. Rinse the dust box with water if necessary, ensuring it is completely dry before reinstallation.
• Заміна мішка для пилу: Replace the dust bag in the auto-empty station when the indicator light signals it is full, or approximately every 4-8 weeks depending on usage.

4.4. Mop Pad Maintenance

• Прибирання: Remove mop pads after each mopping session. Hand wash or machine wash with mild detergent. Air dry completely before reattaching.
• Заміна: Replace every 1-3 months, or if they show signs of wear, reduced absorbency, or persistent staining.

5. Усунення поширених проблем

6. Технічні характеристики

• Назва продукту: DREAME Robot Vacuum and Mop Accessories Kit
• Сумісні моделі: DREAME X50 Ultra, DREAME L50 Ultra
• Включені компоненти: 1 Roller Brush, 2 Side Brushes, 2 Dust Boxes, 2 Dust Bags, 1 Cleaning Solution, 6 Mop Pads
• Kit Dimensions (Approx.): 7 см (Д) x 2 см (Ш) x 3 см (В)
• Kit Weight (Approx.): 3.67 фунта
• UPC: 810142560276

7. Інформація про гарантію

This accessories kit is designed as consumable replacement parts. For specific warranty information regarding manufacturing defects or issues with the accessories, please refer to the warranty policy provided with your original DREAME robot vacuum or visit the official DREAME website. Warranty terms typically cover defects in materials and workmanship, but not normal wear and tear of consumable items.

8. Підтримка клієнтів

For further assistance, technical support, or to purchase additional accessories, please contact DREAME customer service through their official website or the contact information provided in your robot vacuum's main user manual. You can also visit the official DREAME store on Amazon for product information and support resources.

Інтернет-ресурси:

• DREAME Official Webсайт: www.dreame-tech.com
• DREAME Store on Amazon: Amazon.com/Dreame