BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit User Manual

1. Інформація про безпеку

Будь ласка, прочитайте всі попередження та інструкції з техніки безпеки перед використанням цього виробу. Недотримання попереджень та інструкцій може призвести до ураження електричним струмом, пожежі та/або серйозних травм.

• не треба jump start a frozen battery.
• не треба use the jump starter if the cables or clamps пошкоджені.
• Ensure proper polarity: Підключіть червоний клamp до плюсової (+) клеми та чорного клamp to the negative (-) terminal. Reverse polarity can cause damage.
• Видалити клamps promptly: Від'єднайте клamps from the vehicle battery immediately after the engine starts.
• Тримайте подалі від дітей: Цей пристрій не іграшка.
• Робоча температура: Use the device within the specified temperature range (-4°F to 140°F).
• Вентиляція: Ensure adequate ventilation when operating the air compressor.
• Особливості захисту: The device is equipped with multiple protections including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

Image: BSMOOM Jump Starter with multiple safety protections. This image highlights the advanced safety features of the BSMOOM jump starter, including over-current, over-temperature, over-voltage, no spark, over-charge, over-discharge, short-circuit, anti-interference, reverse polarity, and low-temperature protection.

2. Продукт закінчивсяview & Компоненти

The BSMOOM 7000A Jump Starter & 150 PSI Air Compressor Kit is a versatile device designed for emergency vehicle starting, tire inflation, and portable power supply.

2.1 Що в коробці

Image: Contents included in the BSMOOM Jump Starter and Air Compressor Kit. This image displays all items included in the product box: the BSMOOM jump starter unit, smart jumper clamps, air hose, various air nozzles, USB charging cable, and the user manual.

• BSMOOM 7000A Jump Starter Unit
• Розумний джемпер Clamps (червоний для позитивного, чорний для негативного)
• Air Hose with Quick Connector
• Various Air Nozzles (for different inflatables)
• Зарядний кабель USB-C
• Посібник користувача
• Чохол для зберігання

2.2 Характеристики продукту

• Піковий струм 7000 А: Capable of starting all gas engines and up to 10.0L diesel engines.
• 150 PSI Air Compressor: Cordless inflator with tire pressure detection for various inflatables.
• Зовнішній акумулятор 26800 мАг: Dual USB-A outputs and one USB-C input/output for charging digital devices.
• 3.4-дюймовий РК-дисплей: Clear display for battery status, pressure readings, and operational modes.
• Подвійні світлодіодні ліхтарі: Features Normal, SOS, and Strobe modes for emergency illumination.
• Розширені засоби безпеки: 10 types of protection for safe operation.
• All-Weather Operation: Designed to function in extreme temperatures from -4°F to 140°F.

Image: BSMOOM 7000A Jump Starter and Air Compressor Kit with accessories. This image displays the BSMOOM 7000A Jump Starter and Air Compressor Kit, including the main unit, heavy-duty jumper clamps (red and black), the flexible air hose with various nozzles, USB charging cables, and a compact carrying case.

Image: Key features of BSMOOM Powerful Car Jump Starter. This graphic highlights key features of the BSMOOM jump starter: 24 months standby time, 99Wh power, LCD screen, 2024 full chip upgrade, 3 LED modes, 10 protection mechanisms, and one-second startup capability.

2.3 Панель керування та порти

Image: BSMOOM Jump Starter control panel and button functions. An illustration detailing the control panel of the BSMOOM jump starter, showing the functions of each button: Preset Air Pressure Up, Mode/Unit Switching, Power/Inflate Start, Light, and Preset Air Pressure Decrease.

• РК-дисплей: Shows battery level, pressure, and mode.
• "M" Button: Mode/Unit Switching (e.g., PSI, BAR, KPA).
• "OK" Button: Power/Inflate Start.
• Light Button (*): Activates LED flashlight modes (Normal, SOS, Strobe).
• Кнопка «+»: Preset Air Pressure Increase.
• Кнопка "-": Preset Air Pressure Decrease.
• Порт пуску: For connecting smart jumper clamps.
• Порт повітряного шланга: For connecting the air hose.
• Вихідні порти USB-A (x2): Для заряджання зовнішніх пристроїв.
• USB-C Input/Output Port (x1): For charging the jump starter or external devices.

3. Налаштування

3.1 Заряджання стартера

Before first use, fully charge the BSMOOM jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
2. Connect the other end of the USB-C cable to a USB wall adapter (not included) or a powered USB port.
3. The LCD display will show the charging status. The battery indicator will fill up as it charges.
4. Charging is complete when the battery indicator shows full.

4. Інструкція з експлуатації

4.1 Запуск автомобіля з стрибка

Ensure the jump starter is sufficiently charged (at least 50% battery recommended).

1. Крок 1: Вставте синій штекер розумного перемикачаamps into the jump start port on the BSMOOM unit. Ensure it is fully inserted.
2. Крок 2: Підключіть червоний (+) клamp to the positive terminal of the vehicle's battery. Connect the black (-) clamp до негативного виводу акумулятора автомобіля.
3. Крок 3: Після підключення смарт-кластерamps will indicate readiness (e.g., a solid green light or specific display on the unit). Turn on your vehicle's engine.
4. Крок 4: Immediately after the engine starts, remove the clamps from the vehicle battery. First, remove the black (-) clamp, потім червоний (+) clamp. Disconnect the smart clampвід блоку пускового пристрою.

Image: BSMOOM Jump Starter connected to a car battery for emergency starting. An illustration demonstrating the BSMOOM jump starter connected to a car battery, highlighting its capability to start various vehicles including those with 12V, all gas, and 10L diesel engines.

Image: Step-by-step guide for jump starting a car with BSMOOM Jump Starter. A four-step visual guide detailing the quick start car procedure: 1. Insert the starting cable into the starter. 2. Connect the clamps to the car's battery. 3. Turn on the engine. 4. Remove the clamps immediately after starting.

4.2 Використання повітряного компресора

1. Connect the air hose to the air hose port on the jump starter unit.
2. Attach the appropriate nozzle to the air hose for the item you wish to inflate (e.g., tire valve, ball needle).
3. Connect the nozzle to the item. The LCD display will show the current pressure.
4. Press the "M" button to select the desired unit (PSI, BAR, KPA).
5. Use the "+" and "-" buttons to set the desired target pressure.
6. Press the "OK" button to start inflation. The compressor will automatically stop when the target pressure is reached.
7. Від'єднайте форсунку та повітряний шланг.

Image: BSMOOM Jump Starter's air compressor inflating a car tire. The BSMOOM device is shown actively inflating a car tire, emphasizing its ultra-fast 150 PSI cordless inflation feature with tire pressure detection. It indicates inflation times for different PSI levels.

Image: BSMOOM Air Pump inflating various items. The image demonstrates the versatility of the BSMOOM 150 PSI ultra-fast inflation wireless digital air pump, showing its use for inflating car tires, motorcycle tires, bicycle tires, and sports balls.

4.3 Використання як портативного зарядного пристрою

1. Connect your digital device's charging cable to one of the USB-A output ports or the USB-C input/output port on the jump starter.
2. Connect the other end of the cable to your digital device.
3. Пуск-стартер автоматично почне заряджати ваш пристрій.

Image: BSMOOM Jump Starter used as a power bank to charge mobile devices. This image illustrates the BSMOOM jump starter functioning as a power bank, charging a smartphone and tablet via its USB-A and USB-C output ports, suitable for various digital devices.

4.4 Використання світлодіодного ліхтарика

1. Press the Light button (*) once to turn on the flashlight in Normal mode.
2. Press the Light button (*) again to cycle through modes: SOS → Strobe → Off.

Image: BSMOOM Jump Starter's bright LED flashlight with SOS and Strobe modes. A visual representation of the BSMOOM jump starter's integrated bright LED flashlight, showcasing its 400-Lumen output and three modes: Normal, SOS, and Strobe, useful for emergencies.

5. Технічне обслуговування

• Зарядка: Recharge the jump starter every 3-6 months, even if not used, to prolong battery life.
• Прибирання: Протріть пристрій сухою м’якою тканиною. Не використовуйте агресивні хімікати або абразивні засоби для чищення.
• Зберігання: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its carrying case for protection.
• Догляд за кабелем: Inspect jumper cables and air hose for any damage before each use.

6. Вирішення проблем

7. Технічні характеристики

Image: BSMOOM Jump Starter operating in extreme temperatures. This image illustrates the BSMOOM jump starter's capability to operate reliably in extreme weather conditions, from 140°F (hot) to -4°F (cold).

8. Гарантія та підтримка

BSMOOM is committed to providing high-quality products and excellent customer service.

• 12 Months Product Quality Commitment: Your purchase is covered by a 12-month quality commitment from the date of purchase.
• 30 Days Unconditional Return Policy: You may return the product within 30 days of purchase for any reason.
• Цілодобова підтримка клієнтів: For any questions, concerns, or support needs, please contact BSMOOM customer service. We aim to provide a quick reply within 24 hours.

For support, please refer to the contact information provided with your product packaging or visit the official BSMOOM webсайт.